R/C Tech Forums
Yeah, no really good place here for front plate. For most part they don’t enforce it. Now if you get stopped for something they will then add it on. But usually not reason to be pulled over. Now there are a few suburbs that do seem bent on forcing everyone to have that front plate.
Yeah, no really good place here for front plate. For most part they don’t enforce it. Now if you get stopped for something they will then add it on. But usually not reason to be pulled over. Now there are a few suburbs that do seem bent on forcing everyone to have that front plate.
0 2018/12/28 12:16:29
This one.
This one.
0 2018/12/27 07:56:07
Esc will mount on top deck. Either under, it fan is removed. Or to the right if leave fan on. The long steering linkage will clear if no fan
Esc will mount on top deck. Either under, it fan is removed. Or to the right if leave fan on. The long steering linkage will clear if no fan
0 2018/12/27 05:41:17
Also missing the long turnbuckle for the steering. Well gives time to try to figure out how to mount esc. This is my Reedy 800z blackbox that used to be in my Associated F6. Looks like might be my only option. What I had hoped to use, has zero chance of fitting under the body
Also missing the long turnbuckle for the steering. Well gives time to try to figure out how to mount esc. This is my Reedy 800z blackbox that used to be in my Associated F6. Looks like might be my only option. What I had hoped to use, has zero chance of fitting under the body
0 2018/12/26 05:42:56
0 2018/12/26 05:42:56
Well progress has hit a snag. I’ve either lost or Kit was missing one of the mounts for the servo. And unfortunately it’s an overseas part. So for second kit in a row. I’m stuck waiting, probably 3 weeks for the part.
Well progress has hit a snag. I’ve either lost or Kit was missing one of the mounts for the servo. And unfortunately it’s an overseas part. So for second kit in a row. I’m stuck waiting, probably 3 weeks for the part.
0 2018/12/26 05:25:48
M chassis body. Some outside the States don’t seem to understand cars like this.
M chassis body. Some outside the States don’t seem to understand cars like this.
0 2018/12/25 05:27:27
Struck by a burst of energy early. Track has been flipped to smooth side. Just need to clean and put the rails back on.
Struck by a burst of energy early. Track has been flipped to smooth side. Just need to clean and put the rails back on.
0 2018/12/25 05:25:19
By shear luck I ran into the mailman as I was headed towards my dads.
By shear luck I ran into the mailman as I was headed towards my dads.
0 2018/12/24 17:09:26
0 2018/12/24 17:07:58
Oddly, Serpent uses the Monster truck for their Christmas post.
Oddly, Serpent uses the Monster truck for their Christmas post.
0 2018/12/24 10:54:00
0 2018/12/24 09:46:11
So here’s pictures of the chassis. Somewhere receiver, servo and ESC all have to fit.
So here’s pictures of the chassis. Somewhere receiver, servo and ESC all have to fit.
0 2018/12/24 09:46:10
0 2018/12/24 09:46:10
Here’s what the guide shows. Mounting esc sideways. But to stay under the body it’s going to need to be small.
Here’s what the guide shows. Mounting esc sideways. But to stay under the body it’s going to need to be small.
0 2018/12/24 09:46:10
Right side steering knuckle broke on the RM. Bit strange but I’ve got a spare.
Right side steering knuckle broke on the RM. Bit strange but I’ve got a spare.
0 2018/12/23 09:27:25
0 2018/12/23 05:21:33
Welll......
Welll......
0 2018/12/22 11:41:54
It’s the MST TCR. Can be fwd or RWD. There is a thread for it. It’s just become available. I’ve still got build mine.
It’s the MST TCR. Can be fwd or RWD. There is a thread for it. It’s just become available. I’ve still got build mine.
0 2018/12/22 08:39:58
Getting closer. 3Racing MG Mini FWD.
Getting closer. 3Racing MG Mini FWD.
0 2018/12/22 05:44:30
To get myself to avoid making a impulsive purchase. Pulled out the unfinished backups. Serpent enyx4.0, XRay T4 ‘17, and Mugen. For what I would spend on the new Serpent F1. I could get these running.
To get myself to avoid making a impulsive purchase. Pulled out the unfinished backups. Serpent enyx4.0, XRay T4 ‘17, and Mugen. For what I would spend on the new Serpent F1. I could get these running.
0 2018/12/22 04:07:35
Front wing assembled. Rear wing and rear sway bar installed.
Front wing assembled. Rear wing and rear sway bar installed.
0 2018/12/21 05:41:12
Looks ok when I check
Looks ok when I check
0 2018/12/20 06:50:59
Protoform Europa FWD body. Not perfectly centered but should be ok. If doba another body in future I’ll have to move rear posts forward a little
Protoform Europa FWD body. Not perfectly centered but should be ok. If doba another body in future I’ll have to move rear posts forward a little
0 2018/12/20 05:32:02
Rear wing almost complete. Have to find 2 screws the list needed.
Rear wing almost complete. Have to find 2 screws the list needed.
0 2018/12/19 05:46:12
With the FF FWD.
With the FF FWD.
0 2018/12/18 05:35:57
After a long delay. Unofficially assembled. Have to find screw for servo. And install motor/esc.
After a long delay. Unofficially assembled. Have to find screw for servo. And install motor/esc.
0 2018/12/18 05:35:57
0 2018/12/17 05:20:34
Same here. Shows two more pages.
Same here. Shows two more pages.
0 2018/12/17 03:33:11
Water fountain at the new place my dads at now makes me want to watch a so-so movie, much better book.
Water fountain at the new place my dads at now makes me want to watch a so-so movie, much better book.
0 2018/12/15 16:35:36
Front swaybar installed. One complaint I’ve got with the kit. Would make things easier if they had included a turnbuckle wrench. The ones used are smaller then every turnbuckle wrench I have.
Front swaybar installed. One complaint I’ve got with the kit. Would make things easier if they had included a turnbuckle wrench. The ones used are smaller then every turnbuckle wrench I have.
0 2018/12/15 05:31:32
Didn’t see this coming. Kit version of the GT24 buggy
Didn’t see this coming. Kit version of the GT24 buggy
0 2018/12/14 06:59:24
Rear suspension is definitely different
Rear suspension is definitely different
0 2018/12/14 05:43:36
Same one from the other day. But today is been constant. Probably had it half dozen times this morning
Same one from the other day. But today is been constant. Probably had it half dozen times this morning
0 2018/12/14 05:06:29
Blitz mini jazz body for mine. Still waiting for repairs part that I lost
Blitz mini jazz body for mine. Still waiting for repairs part that I lost
0 2018/12/14 05:03:32
Look under the body. Small chance I’ll get it running Sunday. If the receiver board I couldn’t use on the MiniZ will work here. And if can get there early Sunday.
Look under the body. Small chance I’ll get it running Sunday. If the receiver board I couldn’t use on the MiniZ will work here. And if can get there early Sunday.
0 2018/12/13 05:34:16
0 2018/12/13 05:34:16
Begin bag #5. Not much smal steps. Assembled 4 more turnbuckles this morning.
Begin bag #5. Not much smal steps. Assembled 4 more turnbuckles this morning.
0 2018/12/13 05:31:06
On the left are the FGX wheels. On right are a set from my F6 from Gravity. This is what they mean. As non standard F1 wheels.
On the left are the FGX wheels. On right are a set from my F6 from Gravity. This is what they mean. As non standard F1 wheels.
0 2018/12/12 10:42:45
0 2018/12/12 09:17:33
Advertising | Cookie Policy | Privacy Statement | Terms of Service | Manage Preferences | Your Privacy Choices
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.