1LikesPT Raceway NEW TRACK Level Green, Murrsyville, Pittsburgh, Penn Trafford, Irwin
12-15-2013, 06:00 AM
#1457
BRRRRRRRrrrrr! It's a bit chilly out this morning. I can't find a better way to warm up then by getting some hot oval racing action in today.. Bring out those rc vehicles and get some run time in them on the track at PT Raceway. Doors open at 10am today.
12-17-2013, 07:26 AM
#1458
Another full race week ahead of us. Practice this Wednesday starting at 5pm, Friday off-road doors open at 5pm, Saturday on-road racing with doors opening at 3pm. VTA madness, F1 fun and run what ya brung sportsman. Rounding things out literally on Sunday with Oval racing, doors open at 10am.
For on-road this is the last time for this layout. We will have a new track layout on Jan 4th for the new year.
Doors will open at 3pm and begin racing by 5:30pm. Here are the days.
December: 7th and 21st
January: 4th and 18th
February: 1st and 22nd
March : 8th and 22nd
April,May: TBA (we will run as long as there is interest)
For on-road this is the last time for this layout. We will have a new track layout on Jan 4th for the new year.
Doors will open at 3pm and begin racing by 5:30pm. Here are the days.
December: 7th and 21st
January: 4th and 18th
February: 1st and 22nd
March : 8th and 22nd
April,May: TBA (we will run as long as there is interest)
Last edited by Sludge-T; 12-17-2013 at 08:08 AM.
12-30-2013, 05:52 PM
#1461
Tommy and I will be there to run F1 this saturday. We might have our VTA's cars ready by then too. Cheers.
01-05-2014, 07:25 AM
#1466
Had a great time running on-road yesterday, awesome way to kick off the New Year. The new track layout is fast! I had a few questions about my VTA: I am running a FDR of 3.56 (92 spur, 49 pinion and 1.9 IR) with the timing on end-bell at 40 deg and a fan on the motor. This is with the Novak Boss 25.5. Using the Novak edge speedo and run no drag brake (I think this helps keep temps down and does not kill corner speed). I think it comes with drag brake programed from the factory so you need to change the settings. Spool in the front and gear diff in the rear.
Thanks again to Tony and the Crew for the great facility. Let’s get the word out there and try and break the 20 car mark in VTA for the next round on Sat the 18th!
Justin
Thanks again to Tony and the Crew for the great facility. Let’s get the word out there and try and break the 20 car mark in VTA for the next round on Sat the 18th!
Justin
01-05-2014, 06:21 PM
#1467
Good times on road see you guys in a month since I'm on call in 2 weekends.
Hope chuck bartlebaugh can read this. Try a Novak motor with your Havoc ESC. I remembered those 1st gen Havoc's only worked with Novak motors due to propriety temparture protection sensors. The non Novak motor very likely the issue.
• All status LEDs scroll from left to right––Blue sensor harness wire disconnected or motor
does not have temperature protection––Replace blue sensor harness wire or use motor
with temperature protection. Check Novak Web site for motor compatibility list.
Hope chuck bartlebaugh can read this. Try a Novak motor with your Havoc ESC. I remembered those 1st gen Havoc's only worked with Novak motors due to propriety temparture protection sensors. The non Novak motor very likely the issue.
• All status LEDs scroll from left to right––Blue sensor harness wire disconnected or motor
does not have temperature protection––Replace blue sensor harness wire or use motor
with temperature protection. Check Novak Web site for motor compatibility list.
01-08-2014, 12:30 PM
#1468
Sportsman Truck A-Main 1-5-14 @ PT Raceway
https://www.youtube.com/watch?v=7zzn...ature=youtu.be
Also Doors open today at 5pm for on/off road practice.
https://www.youtube.com/watch?v=7zzn...ature=youtu.be
Also Doors open today at 5pm for on/off road practice.