SMZR2

iTrader: (38)

are the 1/8th scale Red aka inserts the same as the inserts found inside the 1/10 scale SC tires?
Can't seem to verify this from digging around on the websites?

pfunk66

iTrader: (10)

Same size and fit for 1/8 and 1/10 yes.. but the new reds are supposed to have a softer feel than the grooved black ones and will be replacing them I beleive.

bigdaddyquale

iTrader: (13)

aka sc tires used to come with blacks now they come with reds (reds are grooved less foam =softer feel) it was a runnin change same part # s

mumaluke

iTrader: (18)

Is it open, is it open??

bpalmer

iTrader: (1)

from what i understand, that area is pretty muddy, steve king says his track is under water...maybe someone can tell me for sure as it is a 60 mile trip for me.......

Quad Racer 34

iTrader: (4)

King is getting his ready?????

bpalmer

iTrader: (1)

mx track...as posted on fb

Quad Racer 34

iTrader: (4)

Oh ok Steve doesn't run the MX stuff. Thats another guy. But if their track is underwater steves is probably pretty wet lol

bpalmer

iTrader: (1)

actually it wasnt real bad.....i went and checked it out today. layout looked good , i think you guys did an awesome job.couldn't tell what you have planned for the right rear ( from drivers stand) part of the track. it seems like the corner falls away and out of sight for a few feet. nice to see that tabletop leading into the frt straight is gone......can't wait for racin !

Quad Racer 34

iTrader: (4)

On the right rear part, you don't go down over the little hill. As soon as you get to the top of the elevated/single part you do a 180 and go left across the track (from drivers stand) and then do another 180 right then 180 left into the double in the back. Then a 90 towards the drivers stand and around the off camber then to the single jump corner and across the 3 whoops. Then a zig zag before you turn to go on to the straight. It's going to be a fast and fun layout!

T-BirdJunkie

iTrader: (10)

Stopped at the track today...looks awesome. You guys are doing a hell of a job! Digging that long sweeper...looking forward to coming off that small triple, going wide open around the sweeper, and bouncing off the pits

bpalmer

iTrader: (1)

try goin wide open down the front straight, not making the 180 lefty and getting launched into the labrea tar pits !

Twisted Nitro

iTrader: (13)

That sweeper is going to have a switch back in it before the straight away.

T-BirdJunkie

iTrader: (10)

Awwwwwwwwwwwww

Quad Racer 34

iTrader: (4)

Thankfully!!

Nitro engines won't like being pinned for that long.