Official Texas Buy/Sell/Trade or WTB thread
#46
Tech Master
iTrader: (80)
The ULTIMATE Losi SCTE Truck. MIP, Kings Head, TLR
Well Its time to let this go.
I’m moving into 1/8 Scale E-Buggy. This is one GREAT truck and super fast. I love it but want to try something else, so it has to go.
It will come with several new and spare parts, as well as some sets of tires. I just did a complete teardown on it, and cleaned and replaced and rebuilt EVERYTHING to get it ready to go. The diffs are filled at 5-7-3, and the shocks are 50 front and 45 rear. ALL were just rebuilt. The bottom of the chassis shows signs of very normal use, but nothing the effects the performance of the truck, obviously. It’s spent 99% of its life racing indoors, so it’s been babied.
The truck will come as a roller ONLY, with parts and tires. No electronics included.
Also installed during the pre-sale clean-up were some new parts that haven’t even been run yet. So it is fresh and ready for more action. They are:
Rear Diff- NEW Losi Lightened Outdrive Set.
Center Diff- New Losi Lightened Outdrive set.
Front outdrives were still like new, so I didn’t replace them.
NEW drive shafts were installed on the front and rear.
New CVDs on the front and rear also.
Some of the upgrades are:
MIP Chassis and kit
TLR Tuning kit
King Heads Dual bearing center diff housing
Blue Alum rear hub carriers
Losi 1/8 scale shocks
Also included is the original stock chassis that’s never been run.
I also have several new in package parts that will be included. They are:
2-Center CVD- $11.99 each
Front Suspension Arms- $ 9.99
40T Spur gear- 4.99
Diff gear set- 9.99
Fr/R Losi Lightened outdrive set- $14.99
Axle set- $9.99
HD Diff housing- $7.99
4- 15mm Shock shafts- $9.99 each
Losi racing spring kit (for original shocks that are included in the used parts.)- $19.99
Low friction shock shaft O-Rings- $3.99
With the new parts I just installed that’s nearly $200 just in new parts alone.
Used parts are too many to list but you can see them in the pics. They are:
6 sets (set = 4) Tires are included. They are:
2 sets of Gridirons, 1 set of Cityblocks, 1 set ofPanthers, 1 set of Eclipses, and a good set of Wishbones.
All tires are used. The wishbones still have some good racing on them, but the others are kind of iffy for racing but would still make good practice tires.
I’m asking $SOLD shipped to the lower 48. It will ship USPS Ground unless you want to pay for faster shipping. This is A LOT of stuff and will cost me a fair amount to ship.
Thanks for looking.
Aaron
I’m moving into 1/8 Scale E-Buggy. This is one GREAT truck and super fast. I love it but want to try something else, so it has to go.
It will come with several new and spare parts, as well as some sets of tires. I just did a complete teardown on it, and cleaned and replaced and rebuilt EVERYTHING to get it ready to go. The diffs are filled at 5-7-3, and the shocks are 50 front and 45 rear. ALL were just rebuilt. The bottom of the chassis shows signs of very normal use, but nothing the effects the performance of the truck, obviously. It’s spent 99% of its life racing indoors, so it’s been babied.
The truck will come as a roller ONLY, with parts and tires. No electronics included.
Also installed during the pre-sale clean-up were some new parts that haven’t even been run yet. So it is fresh and ready for more action. They are:
Rear Diff- NEW Losi Lightened Outdrive Set.
Center Diff- New Losi Lightened Outdrive set.
Front outdrives were still like new, so I didn’t replace them.
NEW drive shafts were installed on the front and rear.
New CVDs on the front and rear also.
Some of the upgrades are:
MIP Chassis and kit
TLR Tuning kit
King Heads Dual bearing center diff housing
Blue Alum rear hub carriers
Losi 1/8 scale shocks
Also included is the original stock chassis that’s never been run.
I also have several new in package parts that will be included. They are:
2-Center CVD- $11.99 each
Front Suspension Arms- $ 9.99
40T Spur gear- 4.99
Diff gear set- 9.99
Fr/R Losi Lightened outdrive set- $14.99
Axle set- $9.99
HD Diff housing- $7.99
4- 15mm Shock shafts- $9.99 each
Losi racing spring kit (for original shocks that are included in the used parts.)- $19.99
Low friction shock shaft O-Rings- $3.99
With the new parts I just installed that’s nearly $200 just in new parts alone.
Used parts are too many to list but you can see them in the pics. They are:
6 sets (set = 4) Tires are included. They are:
2 sets of Gridirons, 1 set of Cityblocks, 1 set ofPanthers, 1 set of Eclipses, and a good set of Wishbones.
All tires are used. The wishbones still have some good racing on them, but the others are kind of iffy for racing but would still make good practice tires.
I’m asking $SOLD shipped to the lower 48. It will ship USPS Ground unless you want to pay for faster shipping. This is A LOT of stuff and will cost me a fair amount to ship.
Thanks for looking.
Aaron
Last edited by LOSI BOY-MF2; 08-12-2013 at 04:57 AM.
#48
NIB Losi 2.0 EU
One more kit I need to sell.
NIB Losi 2.0 EU kit. Never opened. $300
I am usually at Indy RC on Saturday or Sunday.
Nice car that needs a good home.
NIB Losi 2.0 EU kit. Never opened. $300
I am usually at Indy RC on Saturday or Sunday.
Nice car that needs a good home.
Last edited by JAFO913; 08-19-2013 at 06:59 PM.
#50
Tech Addict
iTrader: (10)
FS D/FW Area: XRAY T2R Pro VTA Car with extra parts
I am selling my XRAY T2R Pro VTA car. Thinking abut moving up to 17.5 or maybe mod Touring Car and need something lighter. This car is perfect for VTA or USGT. Has a T2'009 carbon fiber top deck, the T2'008/T2'0099/T2R Pro 309860 lipo balancing chassis weights Lipo conversion kit, the 300944 T2'009 38 tooth rubber spec conversion set, and 2 303033 T2 Alu Quick Roll-Center Holder™ 4.9mm - L1+L2 (both front and rear). I have a 300943 T2'009 - rubber-spec conversion set - forward motor position (allows you to move the motor forward bu .060 for more steering) in the bag which comes with the car too. Comes with both a T3 ball diff and a Spec-R gear diff with a T3 front spool, a McAllister 69 Mustang VTA practice body with driver,a new in bag McAllister VTA body, a bunch of extra parts, and has T3-12 shocks installed. Also have a complete T2/3 Front Sway Bar Kit that comes with it No photos but we can meet at Mikes (Carrollton, TX) on Monday or Thursday if you want to see it. I am asking $175.00 (100.00 for the car and 75.00 for all the parts and extra body). This is a roller with no electronics. PM or Email me if interested.
#52
Tech Addict
iTrader: (10)
I am selling my XRAY T2R Pro VTA car. Thinking abut moving up to 17.5 or maybe mod Touring Car and need something lighter. This car is perfect for VTA or USGT. Has a T2'009 carbon fiber top deck, the T2'008/T2'0099/T2R Pro 309860 lipo balancing chassis weights Lipo conversion kit, the 300944 T2'009 38 tooth rubber spec conversion set, and 2 303033 T2 Alu Quick Roll-Center Holder™ 4.9mm - L1+L2 (both front and rear). I have a 300943 T2'009 - rubber-spec conversion set - forward motor position (allows you to move the motor forward bu .060 for more steering) in the bag which comes with the car too. Comes with both a T3 ball diff and a Spec-R gear diff with a T3 front spool, a McAllister 69 Mustang VTA practice body with driver,a new in bag McAllister VTA body, a bunch of extra parts, and has T3-12 shocks installed. Also have a complete T2/3 Front Sway Bar Kit that comes with it No photos but we can meet at Mikes (Carrollton, TX) on Monday or Thursday if you want to see it. I am asking $175.00 (100.00 for the car and 75.00 for all the parts and extra body). This is a roller with no electronics. PM or Email me if interested.
#54
Tech Addict
iTrader: (10)
I am selling my XRAY T2R Pro VTA car. Thinking abut moving up to 17.5 or maybe mod Touring Car and need something lighter. This car is perfect for VTA or USGT. Has a T2'009 carbon fiber top deck, the T2'008/T2'0099/T2R Pro 309860 lipo balancing chassis weights Lipo conversion kit, the 300944 T2'009 38 tooth rubber spec conversion set, and 2 303033 T2 Alu Quick Roll-Center Holder™ 4.9mm - L1+L2 (both front and rear). I have a 300943 T2'009 - rubber-spec conversion set - forward motor position (allows you to move the motor forward bu .060 for more steering) in the bag which comes with the car too. Comes with both a T3 ball diff and a Spec-R gear diff with a T3 front spool, a McAllister 69 Mustang VTA practice body with driver,a new in bag McAllister VTA body, a bunch of extra parts, and has T3-12 shocks installed. Also have a complete T2/3 Front Sway Bar Kit that comes with it No photos but we can meet at Mikes (Carrollton, TX) on Monday or Thursday if you want to see it. I am asking $175.00 (100.00 for the car and 75.00 for all the parts and extra body). This is a roller with no electronics. PM or Email me if interested.
#55
Tech Addict
iTrader: (9)
2 week old Reed Sonic 540 Mach 2 5.5 modified motor. This motor was only used for 1 race day and it was too much for me. My loss is your gain $70 text 214-612-6354. More pictures uploaded tonight.
FEATURES:
Lightweight design
Optimized air flow
Dual precision ball bearings
High-strength balanced sintered rotor
Adjustable timing with alloy end cap
Silver-plated solder tabs
Completely rebuildable
Competition proven
200mm sensor wire
Ultra smooth, sensored operation
Built to ROAR, EFRA, and IFMAR specs
FEATURES:
Lightweight design
Optimized air flow
Dual precision ball bearings
High-strength balanced sintered rotor
Adjustable timing with alloy end cap
Silver-plated solder tabs
Completely rebuildable
Competition proven
200mm sensor wire
Ultra smooth, sensored operation
Built to ROAR, EFRA, and IFMAR specs
Last edited by TLRrunner; 08-27-2013 at 08:07 PM.
#56
Tech Champion
iTrader: (6)
selling my ARR Tekno EB48, only two weekends on it. Details here,
http://www.rctech.net/forum/r-c-item...-eb48-arr.html
Also selling my B44.1, only one weekend on it.
http://www.rctech.net/forum/r-c-item...h-arr-f-s.html
http://www.rctech.net/forum/r-c-item...-eb48-arr.html
Also selling my B44.1, only one weekend on it.
http://www.rctech.net/forum/r-c-item...h-arr-f-s.html
#57
Tech Master
iTrader: (49)
FS: Associated TC3 with IRS chassis!
The last of my AE TC3s! It's set up to run the 1/10 Electric GT class at Hobbytown in Austin, but my son Lucas has been running it in the Novice class. This TC3 has the rare, IRS graphite chassis and is VERY light compared to the stock tub. The front end has a lot of new parts including arms, hubs, carriers, etc. In the pictures below a FlySky receiver is shown, but will not be included unless you want it. All rod-ends are RPM. Currently mounted on the car are a set of Solaris wheels/tires, but a set of HPI treaded tires can be included. A box full of spares go with the car. The body is a 200 mm HPI Lotus Elise. The motor is the spec Axial 27T brushed, closed end bell unit for the GT10 class. The motor is hardwired and a Deans battery connector is soldered on to the Tazer ESC.
The car handles great and is still competitive in our GT class. I'm a little partial to this car, even maybe a little emotionally attached so I'm pretty firm on prices.
I can sell it in one of a few different configurations:
RTR - with Tazer ESC, Axial 27T motor, Airtronics AM Rx/Tx, JR Z590M servo, spares, no lipos or charger... $160
ARTR - same as above, no radio or recevier... $140
ROLLER - same as above, no electronics... $110
I'm hoping for local sale, first. I'll have it with me at the Texas EOS next week in San Antonio, but I hope to have it sold by then. Not considering shipping at the moment. Thanks for looking!!!
PM me or shoot me a text @ 512-6-Seven-3-9-eight-5-two.
The car handles great and is still competitive in our GT class. I'm a little partial to this car, even maybe a little emotionally attached so I'm pretty firm on prices.
I can sell it in one of a few different configurations:
RTR - with Tazer ESC, Axial 27T motor, Airtronics AM Rx/Tx, JR Z590M servo, spares, no lipos or charger... $160
ARTR - same as above, no radio or recevier... $140
ROLLER - same as above, no electronics... $110
I'm hoping for local sale, first. I'll have it with me at the Texas EOS next week in San Antonio, but I hope to have it sold by then. Not considering shipping at the moment. Thanks for looking!!!
PM me or shoot me a text @ 512-6-Seven-3-9-eight-5-two.
#58
CHARGERS, RADIOS, POWER SUPPLY FS/FT
I have a few things for sale or trade local DFW area:
1. TrakPower 12V 25A power supply, like new. $50 OBO
2. Venom Medion Dual 10A LiPo charger with integrated speakers, used 1 time, all connections included. $100 OBO
3. SOLD
4. Spektrum DX3C used, with receiver, soft case. $50 OBO
5. Duratrax Intellipeak ICE LiPo charger, great shape. $40 OBO
6. 2 Traxxas Tqi with receivers, like new. $40 for both OBO
The only thing I am looking for in trade would be a higher end radio, i.e. Ko Propo Helios, M11, RadioPost, etc.
I will try to sale locally to skip all of the shipping cost. P.M. me or TEXT 214-263-5122.
1. TrakPower 12V 25A power supply, like new. $50 OBO
2. Venom Medion Dual 10A LiPo charger with integrated speakers, used 1 time, all connections included. $100 OBO
3. SOLD
4. Spektrum DX3C used, with receiver, soft case. $50 OBO
5. Duratrax Intellipeak ICE LiPo charger, great shape. $40 OBO
6. 2 Traxxas Tqi with receivers, like new. $40 for both OBO
The only thing I am looking for in trade would be a higher end radio, i.e. Ko Propo Helios, M11, RadioPost, etc.
I will try to sale locally to skip all of the shipping cost. P.M. me or TEXT 214-263-5122.
Last edited by CHAVAN30; 09-06-2013 at 03:53 AM.
#59
I have an ONYX 3S soft-case Li-Po battery for sale or trade for a 2S Li-Po. The 3S is a 5000mAh 11.1v 25c 56Wh 3s with a traxxas plug and built-in balance port. You can easily change the plug, but let me know and i will keep the traxxas one.
Im asking $45 (avg value of a 2s lipo) for it even though i paid $60. Its only been charged twice and used twice, never discharged below 9v (honestly dont think it ever got below 10v). Only reason im selling it is bc its way too much battery for my t4.1 and therefore i have no use for it.
PM if interested. I live in Irving, tx but drive all over DFW for a living, so im flexible on a meeting place. I also frequent Mike's in carrolton, and Speed Monkey in Irving. Thanks for reading.
Btw, i will trade for a 2S Li-Po rated at 3500 or higher mAh....
OR ...2 (bc i can buy one new for $20) NiMhs rated at 3000 or higher mAh.
Im asking $45 (avg value of a 2s lipo) for it even though i paid $60. Its only been charged twice and used twice, never discharged below 9v (honestly dont think it ever got below 10v). Only reason im selling it is bc its way too much battery for my t4.1 and therefore i have no use for it.
PM if interested. I live in Irving, tx but drive all over DFW for a living, so im flexible on a meeting place. I also frequent Mike's in carrolton, and Speed Monkey in Irving. Thanks for reading.
Btw, i will trade for a 2S Li-Po rated at 3500 or higher mAh....
OR ...2 (bc i can buy one new for $20) NiMhs rated at 3000 or higher mAh.
#60
I have a few things for sale or trade local DFW area:
1. TrakPower 12V 25A power supply, like new. $50 OBO
2. Venom Medion Dual 10A LiPo charger with integrated speakers, used 1 time, all connections included. $100 OBO
3. SOLD
4. Spektrum DX3C used, with receiver, soft case. $50 OBO
5. Duratrax Intellipeak ICE LiPo charger, great shape. $40 OBO
6. 2 Traxxas Tqi with receivers, like new. $40 for both OBO
The only thing I am looking for in trade would be a higher end radio, i.e. Ko Propo Helios, M11, RadioPost, etc.
I will try to sale locally to skip all of the shipping cost. P.M. me or TEXT 214-263-5122.
1. TrakPower 12V 25A power supply, like new. $50 OBO
2. Venom Medion Dual 10A LiPo charger with integrated speakers, used 1 time, all connections included. $100 OBO
3. SOLD
4. Spektrum DX3C used, with receiver, soft case. $50 OBO
5. Duratrax Intellipeak ICE LiPo charger, great shape. $40 OBO
6. 2 Traxxas Tqi with receivers, like new. $40 for both OBO
The only thing I am looking for in trade would be a higher end radio, i.e. Ko Propo Helios, M11, RadioPost, etc.
I will try to sale locally to skip all of the shipping cost. P.M. me or TEXT 214-263-5122.
7. FlySky FS-GT3B radio with 3 receivers, in great shape. $40 OBO
8. Traxxas Slayer, 3.3 will need to be tuned, just been sitting, add your radio/rx, glow ignitor and go. $150 OBO
9. Helion Dominus 10TR brushless Radient Reaktor, great shape, add your radio/rx. $150 OBO
10. Duratrax Warhead, good shape, extra parts, add your radio/rx. $100 OBO
Looking for a VTA car in trade. A TC3 or TC4, XRay, etc. Or will take $175 for items 1-10 above. ITEM 3 SOLD!
Last edited by CHAVAN30; 09-05-2013 at 03:32 PM. Reason: new price