Fullthrottle Motorsports
12-11-2007, 09:14 AM
#9887
[QUOTE=BSchorr;3962587]Ha!
ben call me
ben call me
Last edited by BILL.D; 12-11-2007 at 09:36 AM.
12-11-2007, 09:35 AM
#9888
bill, i was looking at your micro motors then i came across this readin up on the motor. any1 else find that funny?
http://www3.towerhobbies.com/cgi-bin...?&I=LXLPV1&P=7
This is the Trinity Cobalt 16 Turn Single Wind Motor.
FEATURES: The first hand wound motor designed especially for 1/18 scale RC Cars 16 Turn high RPM single wind Armature is wound with silver soldered commutator tabs Epoxied armature for longer life Epoxy Balanced for for less vibration Diamond trued commutator Adjustable timing Completely rebuildable, brushes, springs, arm Surface mounted capacitors, nothing to solder Dual precision ball bearings Fits 1/18 cars from Trinity, Associated, Losi, Etc. Motor is factory assembled, timed, and tweeked Replacement brushes and springs - TRIC1350
INCLUDES: One Cobalt 18 motor
REQUIRES: Motor leads and connectors of modeler's choice
SPECS: Length: (2") 51mm Diameter: (1") 24mm Shaft Size: (.1") 2mm
COMMENTS: These instructions are per Trinity To break in this motor: Run the throttle at 1/4 for a minute Repeat this three times letting the motor cool each time. This will ensure the brushes are correctly seated. Do not use full throttle, this could harm the motor. Use only with aftermarket speed control only. Suggested gearing: use a pinion which has 3 or 4 less teeth than your current pinion.
http://www3.towerhobbies.com/cgi-bin...?&I=LXLPV1&P=7
This is the Trinity Cobalt 16 Turn Single Wind Motor.
FEATURES: The first hand wound motor designed especially for 1/18 scale RC Cars 16 Turn high RPM single wind Armature is wound with silver soldered commutator tabs Epoxied armature for longer life Epoxy Balanced for for less vibration Diamond trued commutator Adjustable timing Completely rebuildable, brushes, springs, arm Surface mounted capacitors, nothing to solder Dual precision ball bearings Fits 1/18 cars from Trinity, Associated, Losi, Etc. Motor is factory assembled, timed, and tweeked Replacement brushes and springs - TRIC1350
INCLUDES: One Cobalt 18 motor
REQUIRES: Motor leads and connectors of modeler's choice
SPECS: Length: (2") 51mm Diameter: (1") 24mm Shaft Size: (.1") 2mm
COMMENTS: These instructions are per Trinity To break in this motor: Run the throttle at 1/4 for a minute Repeat this three times letting the motor cool each time. This will ensure the brushes are correctly seated. Do not use full throttle, this could harm the motor. Use only with aftermarket speed control only. Suggested gearing: use a pinion which has 3 or 4 less teeth than your current pinion.
12-11-2007, 01:38 PM
#9890
12-11-2007, 01:51 PM
#9891
Tech Master
Bill have you heard anything on the parts??
12-11-2007, 02:05 PM
#9892
12-11-2007, 05:54 PM
#9894
Tech Master
12-13-2007, 06:13 AM
#9895
ok guys
all orders are shipped
pete standby for tracking number.......
vic yours is going out today......
also guys fullthrottle motorsports is in talks right now making us bigger
then ever and im hoping to do this fulltime. that also means attending all big races MO will love that so will mike... more detals comming soon so if i dont get back to you in the next 2 days ill be in meetings
making plans to better you and my customers
if you need to call or e-mail me i will return them after 7pm my time
also we are working on new and better price list for are team drivers and hobby
store , so please have them contact me.
thanks
billy bob
all orders are shipped
pete standby for tracking number.......vic yours is going out today......
also guys fullthrottle motorsports is in talks right now making us bigger
then ever and im hoping to do this fulltime. that also means attending all big races MO will love that so will mike... more detals comming soon
so if i dont get back to you in the next 2 days ill be in meetingsmaking plans to better you and my customers
if you need to call or e-mail me i will return them after 7pm my time
also we are working on new and better price list for are team drivers and hobby
store , so please have them contact me.
thanks
billy bob
12-13-2007, 12:59 PM
#9896
yea guys Bill working on the future of Full Throttle bring in nothing but the best for everybody, customers and team drivers
12-13-2007, 01:13 PM
#9898
Tech Regular
good luck with it all bill
12-13-2007, 01:13 PM
#9899
12-13-2007, 01:17 PM
#9900
thanks jimmy
you know the truth is i have put out alot of money and not realy getting
much inreturn but that's love i have for this sport
so the ones that hang in there with me and help us grow
will make it more better to get what top drivers like your self
get the best i have at a manor time
you know the truth is i have put out alot of money and not realy getting
much inreturn but that's love i have for this sport
so the ones that hang in there with me and help us grow
will make it more better to get what top drivers like your self
get the best i have at a manor time