Fullthrottle Motorsports
08-03-2007, 12:34 PM
#8686
Tech Regular
bill check your email
jimmy
jimmy
08-03-2007, 02:57 PM
#8687
08-03-2007, 03:26 PM
#8688
Tech Master
Join Date: May 2005
Location: Under that rock you just kicked over!!!!
Posts: 1,040
oh no, there goes the neighbourhood. Hows those home grown MHP motors going Jim?? 
just to keep you guys in the US informed, Full throttle UK is doing extremely well.
The first outing at a UK national we had 7 drivers with the following results.
3rd and 8th A final 27T, 1st B final 27T, 1st and 4th C Final, and 2 in the D.
not bad for a first official day out.
Bill and I would like to welcome, Remo Casadei, Luke Hobson, Matt Digby, Dan Ghibaldan, and in 27T stock only Glen Westwood to the UK side of the family.
SLCC round 5 this weekend at Eastbourne, a tight track but looks like Full Throttle will be on top again.
Bill you have pm re your last message :P
just to keep you guys in the US informed, Full throttle UK is doing extremely well.
The first outing at a UK national we had 7 drivers with the following results.
3rd and 8th A final 27T, 1st B final 27T, 1st and 4th C Final, and 2 in the D.
not bad for a first official day out.
Bill and I would like to welcome, Remo Casadei, Luke Hobson, Matt Digby, Dan Ghibaldan, and in 27T stock only Glen Westwood to the UK side of the family.
SLCC round 5 this weekend at Eastbourne, a tight track but looks like Full Throttle will be on top again.
Bill you have pm re your last message :P
08-03-2007, 03:27 PM
#8689
Tech Master
Join Date: May 2005
Location: Under that rock you just kicked over!!!!
Posts: 1,040
Bill, I noticed that your getting new t-shirts.
remo as a thing about t-shirts so i wondered if you can get him a Full throttle Boob Tube..... also be good to get some lady drivers involved:P
remo as a thing about t-shirts so i wondered if you can get him a Full throttle Boob Tube..... also be good to get some lady drivers involved:P
08-03-2007, 05:28 PM
#8690
Pete I'm gonna kick your ass.
08-03-2007, 09:10 PM
#8691
08-04-2007, 08:10 PM
#8692
Tech Elite
iTrader: (10)
Join Date: Dec 2003
Location: ~ Stuck in ~ Maryland ~ For Now
Posts: 2,438
Trader Rating: 10 (100%+)
Mr. Haynes cym .
Hey hillybilly thanks for doing my motor 2nite that was a really really fun race keeping up with HoTrOd Sr.
Hey hillybilly thanks for doing my motor 2nite that was a really really fun race keeping up with HoTrOd Sr.
08-04-2007, 09:06 PM
#8693
Bill thanks for borrow me a fast motor. the motor you build a fast like hell. i just find out the camber plate that i tell you just now its about 2.5mm thick hard plastic plate. one thing is better mine as they have 4 different camber degree from -0.5 to -2 camber
08-05-2007, 12:00 AM
#8694
ya thanks for the camber plate anything is better then what i have
so i take it you like the q brush
08-05-2007, 12:03 AM
#8695
08-06-2007, 11:51 AM
#8697
Last edited by BILL.D; 08-06-2007 at 12:28 PM.
08-06-2007, 04:23 PM
#8699
back at you thanks
Last edited by BILL.D; 08-06-2007 at 04:46 PM.
