Cool Can Fan Talk
#242
Tech Elite
iTrader: (32)
I forgot my temp probe this past weekend during my inaugural run with my T2.
High Traction Foam carpet racing so you know the 19T get extremely hot.
Without the cool-can fan, after 2 minutes of hard practice I was unable to hold my finger on the motor for more than a few seconds...I re-attached the fan and after another 3-minutes of racing the motor temperature dropped enough where I was able to hold my finger on the motor without any discomfort.
Nice job...a lot of guys here in the NY area have been asking about the fans...I sure Malc will get a few orders here in the States.
High Traction Foam carpet racing so you know the 19T get extremely hot.
Without the cool-can fan, after 2 minutes of hard practice I was unable to hold my finger on the motor for more than a few seconds...I re-attached the fan and after another 3-minutes of racing the motor temperature dropped enough where I was able to hold my finger on the motor without any discomfort.
Nice job...a lot of guys here in the NY area have been asking about the fans...I sure Malc will get a few orders here in the States.
#243
Originally Posted by mguebert69
I placed an order more than a week ago. Has anybody received any sort of confirmation from them. I have not and I am wondering wether my order even went through. I am going to a race in 2 weeks and I really need this fan.
Sorry I have sent you an email this morning with regards to your CCF you ordered on 31st January. Unfortunately I have not yet had time to set up a autumatic response from paypal to show that we have received your order, so have to do all the responses manually for the moment, so I apologise for not responding to yours. but be assured it went off today
Cheers Malc THE CAN MAN
#244
Originally Posted by TryHard
Quick results from testing this weekend.
Without fan, can temp 60.2degC
With fan 32.1 degC
This was tested on the can itself, not the internals, directly after a run. No doubt they would be hotter.
HiH
Ed
Without fan, can temp 60.2degC
With fan 32.1 degC
This was tested on the can itself, not the internals, directly after a run. No doubt they would be hotter.
HiH
Ed
Cheers Malc THE CAN MAN
How about some new pics ie T2's EC's etc etc I can then up date the pics on the website also need one of the LCG anyone
#245
Originally Posted by sbs
At the NWR you will see 3 Stingers from Denmark with DCCF
What figures do have, if any on the heat reduction
#246
Originally Posted by Carl Giordano
I forgot my temp probe this past weekend during my inaugural run with my T2.
High Traction Foam carpet racing so you know the 19T get extremely hot.
Without the cool-can fan, after 2 minutes of hard practice I was unable to hold my finger on the motor for more than a few seconds...I re-attached the fan and after another 3-minutes of racing the motor temperature dropped enough where I was able to hold my finger on the motor without any discomfort.
Nice job...a lot of guys here in the NY area have been asking about the fans...I sure Malc will get a few orders here in the States.
High Traction Foam carpet racing so you know the 19T get extremely hot.
Without the cool-can fan, after 2 minutes of hard practice I was unable to hold my finger on the motor for more than a few seconds...I re-attached the fan and after another 3-minutes of racing the motor temperature dropped enough where I was able to hold my finger on the motor without any discomfort.
Nice job...a lot of guys here in the NY area have been asking about the fans...I sure Malc will get a few orders here in the States.
Thank also for the feed back, I have had many many ordes from the US especialy with T2's
Cheers Malc THE CAN MAN
#248
Originally Posted by Carl Giordano
some photos of my T2 from this past weeked with the cool can fan system
Cant seam to open the pic links
#249
Tech Elite
iTrader: (32)
Picture was copied from a photo on the T2 site...post # 2803 half way down the page....see link below...a friend of mine took the photos at the track...
http://www.rctech.net/forum/showthre...&page=94&pp=30
http://www.rctech.net/forum/showthre...&page=94&pp=30
#251
Originally Posted by Carl Giordano
Picture was copied from a photo on the T2 site...post # 2803 half way down the page....see link below...a friend of mine took the photos at the track...
http://www.rctech.net/forum/showthre...&page=94&pp=30
http://www.rctech.net/forum/showthre...&page=94&pp=30
Cheers Malc THE CAN MAN
#253
Originally Posted by Carl Giordano
yes...I will also try to get you a cleaner picture.
THE CAN MAN
#254
ive got a major problem not with the CCF thats fine but i have just brought a Tamiya Evo4ms to replace the TC3 and im guessing the CCF wont fit right