Hyperform Racing
#1081
Tech Fanatic
iTrader: (3)
Carlos
run about 5000 wt 1/8 diff lube in the tubes
add some shims between the tbar and bottom plate so rear rides lower
also add washers to make font end as wide as you can
you can also nowwer the tplate on the sides a little
do the things that Lino stated also
BUT only do one at a time and see how you like it
for your track ( now that I have been there) I would set car up like this
front
Jaco purple
20 springs with trinty white stuff for lube
5 deg blocks
1 deg - caster
servo flat with rods angle back
run toe in (I see you have yours out that would make car overstear outdoors on that track)try toe in first you will see a big inprovement right away run about 1 deg in and when you check make sure you press on the back part of rims as this will show you how it runs
rear
Jaco pinks
run tires big so you can run ride ht adjusters in the middle of the rear it lowwer the weight of the motor below center
30wt oil in cener with stock spring
5000wt diff in tubes
1mm shim under front of tbar
add 1mm shims between tbar and motor plate
3.5 mm ride hight
batts all the way to back
also what are you running on tires
I would run pargon and rub it into tires as mutch as you can
call me if you need more info
hope this helps
(quote) Plus he only runs on carpet for he most part that I know of.
Carlos
I ran outdoors for about 20years only ran carpet once are twice a year during that time. started to run carpet at mikes when he opened. at the regionals I have not ran outdoors 1/12 for about 10 years just had to dig into the old head to find the things I used to do back then to make car work
Tim
Lino airfare is book for the birds hotel ready and geting parts ready to go see you there.
run about 5000 wt 1/8 diff lube in the tubes
add some shims between the tbar and bottom plate so rear rides lower
also add washers to make font end as wide as you can
you can also nowwer the tplate on the sides a little
do the things that Lino stated also
BUT only do one at a time and see how you like it
for your track ( now that I have been there) I would set car up like this
front
Jaco purple
20 springs with trinty white stuff for lube
5 deg blocks
1 deg - caster
servo flat with rods angle back
run toe in (I see you have yours out that would make car overstear outdoors on that track)try toe in first you will see a big inprovement right away run about 1 deg in and when you check make sure you press on the back part of rims as this will show you how it runs
rear
Jaco pinks
run tires big so you can run ride ht adjusters in the middle of the rear it lowwer the weight of the motor below center
30wt oil in cener with stock spring
5000wt diff in tubes
1mm shim under front of tbar
add 1mm shims between tbar and motor plate
3.5 mm ride hight
batts all the way to back
also what are you running on tires
I would run pargon and rub it into tires as mutch as you can
call me if you need more info
hope this helps
(quote) Plus he only runs on carpet for he most part that I know of.
Carlos
I ran outdoors for about 20years only ran carpet once are twice a year during that time. started to run carpet at mikes when he opened. at the regionals I have not ran outdoors 1/12 for about 10 years just had to dig into the old head to find the things I used to do back then to make car work
Tim
Lino airfare is book for the birds hotel ready and geting parts ready to go see you there.
#1082
Nice, we have our hotel room also, just need to send in my entry and get a flight. Next stop for the HYperform train though is Novak Race followed by the January Jam at RC Madness. Then we get to start thinking about Snowbirds...
#1083
Originally Posted by tpczx6
Carlos
I ran outdoors for about 20years only ran carpet once are twice a year during that time. started to run carpet at mikes when he opened. at the regionals I have not ran outdoors 1/12 for about 10 years just had to dig into the old head to find the things I used to do back then to make car work
I ran outdoors for about 20years only ran carpet once are twice a year during that time. started to run carpet at mikes when he opened. at the regionals I have not ran outdoors 1/12 for about 10 years just had to dig into the old head to find the things I used to do back then to make car work
#1084
Originally Posted by theisgroup
man, that make you older then dirt.
#1085
hey weren't rc cars on strings back then and the motor was a zipper that you pulled to make the wheels spin?
#1086
ha, poor Tim...
I got your message btw Tim, sorry I missed your call.
I got your message btw Tim, sorry I missed your call.
#1087
Tech Fanatic
iTrader: (3)
Originally Posted by theisgroup
hey weren't rc cars on strings back then and the motor was a zipper that you pulled to make the wheels spin?
Ok Yang
cars back then did not even have springs we used washers to adjust them
dont make me get out the old cars and run pass you with one
#1091
Originally Posted by tpczx6
thats ok Lino call me anytime phones alway with me
Yeah, I'm the opposite.... Emails please!
#1092
Originally Posted by CarlosG.
I would like to see that, Yang being schooled by Tim.
#1093
Originally Posted by Hyperform Racing
ha, poor Tim...
I got your message btw Tim, sorry I missed your call.
I got your message btw Tim, sorry I missed your call.
you forgot OLD. hehehe
#1095
Originally Posted by CarlosG.
I just want to wish all of Hyperform Racing a Merry Christmas and a Happy New Year. Also good luck the Snowbirds and the Novak race when you all go.