1LikesMLP Motorsports Int
05-26-2006, 10:27 PM
#1
MLP Motorsports Int
Do you F1?
Hi I guess this will be the Hot new thread for MLP Motorsports and our Drivers!
Questions concerning MLP Motorsports products and Setups just ask.
We will also post new info on our Products here! So here is a look at our F201SCFPRO II.
Drivers:
Thanks for coming I would like you to post your setups here and a little info on what you think we can do better.
Plus you can also talk about anything MLP Right here!! ok
If you need me I will be here to help you with anything you would like ok.
If I can not help I will get some one that can.
I would also like to thank RCtech for this Thread!
Hi I guess this will be the Hot new thread for MLP Motorsports and our Drivers!
Questions concerning MLP Motorsports products and Setups just ask.
We will also post new info on our Products here! So here is a look at our F201SCFPRO II.
Drivers:
Thanks for coming I would like you to post your setups here and a little info on what you think we can do better.
Plus you can also talk about anything MLP Right here!! ok
If you need me I will be here to help you with anything you would like ok.
If I can not help I will get some one that can.
I would also like to thank RCtech for this Thread!
Last edited by Marty Peterson; 08-03-2008 at 12:48 PM.
06-07-2006, 06:03 PM
#3
The F201SCFPRO F1 car!
Here we have the F201SCFPRO F1 car.
Check it out and setup will follow.
I would like to Welcome Jonn Erbmann to Team MLP as Team Captian and Lead Driver!
Thanks Jonn
Check it out and setup will follow.
I would like to Welcome Jonn Erbmann to Team MLP as Team Captian and Lead Driver!
Thanks Jonn
Last edited by Marty Peterson; 08-03-2008 at 12:48 PM.
06-07-2006, 07:22 PM
#5
A few more
we are making a new motor mount/spur mount to allow all of these setups.
Here you will see the chassis (V2) we will make this weekend and send out to our Factory Driver.
next 3 you will see the 3 battery setups and motor sets you can make with the one car. Last you can tell how much room is one the V1 Chassis
we are making a new motor mount/spur mount to allow all of these setups.
Here you will see the chassis (V2) we will make this weekend and send out to our Factory Driver.
next 3 you will see the 3 battery setups and motor sets you can make with the one car. Last you can tell how much room is one the V1 Chassis
Last edited by Marty Peterson; 08-03-2008 at 12:47 PM.
06-10-2006, 06:48 PM
#6
Hey everyone! This touring car is going to be awesome, track dates will be posted soon so everyone can see the V1 prototype in action, as well as the MLP F201 SCF-PRO. If any SoCal people want to start an F1 series, get in touch with me. Also feel free to email me at anytime with any setup questions, problems, support, or anything! Thanks! 
06-10-2006, 11:13 PM
#7
This touring car is awesome, track dates will be posted soon so everyone can see the V1 prototype in action at the following Tracks
IRP Raceway DeKalb, IL
S&N Trackside Raceway Brookfield WI
Leisure Hours R/C Raceway - Joliet IL
And anyone wanting to start an F1 series, at IRP Trackside or Leisure Hours Raceway get in touch with me. Also feel free to email me at anytime with any setup questions, problems, support, or anything! Thanks!
IRP Raceway DeKalb, IL
S&N Trackside Raceway Brookfield WI
Leisure Hours R/C Raceway - Joliet IL
And anyone wanting to start an F1 series, at IRP Trackside or Leisure Hours Raceway get in touch with me. Also feel free to email me at anytime with any setup questions, problems, support, or anything! Thanks!
06-10-2006, 11:39 PM
#8
Just to put it out there, any current MLP owners may contact me via cell phone or email, 24/7, for tech support, advice, setups, problems, anything at all. (847)917-2691, [email protected] . Prospective customers and general support is available from me between 9AM and 9PM, at the same contact information. MLP R/C Motorsports INT will provide the best customer service in the industry, to support the best cars in the industry! 
06-14-2006, 05:17 PM
#9
Here is what we feel is going to come about in F1 R/C Racing!
on the market today the only F1 cars would be D-Driver cars and The base 4X4 Tamiya F201 and MLP.
D Drive Cars I do not think the would do to well with a brushless motor or a hot 12 or 10 out in a parking lot race or just tooling around the the play ground But I might be wrong!
And if you take way the traction aid off the track- the D Drive cars will not work to well I might be wrong but this is what I think!
This is why we made our F206F1 2wd car with a full active suspension.
Plus with the LIPO's And Brushless systems out there on the market today you could put a brushless into the F206F1 and fine tune the throttle and Brake right from your laptop and make it Fly! Now it is looking more and more like an F1 car and racing Think about it!
Plus in 2007 we will come out with a full line of slick tires for the Tamiya Wheels but in F201 sizes and they will work for the F206F1 2WD Car that they were designed for! and we also have a new body!
on the market today the only F1 cars would be D-Driver cars and The base 4X4 Tamiya F201 and MLP.
D Drive Cars I do not think the would do to well with a brushless motor or a hot 12 or 10 out in a parking lot race or just tooling around the the play ground But I might be wrong!
And if you take way the traction aid off the track- the D Drive cars will not work to well I might be wrong but this is what I think!
This is why we made our F206F1 2wd car with a full active suspension.
Plus with the LIPO's And Brushless systems out there on the market today you could put a brushless into the F206F1 and fine tune the throttle and Brake right from your laptop and make it Fly! Now it is looking more and more like an F1 car and racing Think about it!
Plus in 2007 we will come out with a full line of slick tires for the Tamiya Wheels but in F201 sizes and they will work for the F206F1 2WD Car that they were designed for! and we also have a new body!
06-15-2006, 01:36 AM
#11
OK
06-15-2006, 02:14 AM
#12
Marty, you have a PM. You couldn't possibly be sleeping at 4:13AM, could you? 
06-15-2006, 02:19 AM
#13
I'm going to go run a pack or two on the SCF, I want to test more with the chassis weighting. Results were promising at SoCal tonight, just need more info. Get ready for some setup sheets, some are on the way, and more will follow. Is it possible for you to email me just the outline of the SCF chassis viwed from the top (like one of our setup sheets?) Full size, or pdf., I dunno, whatever you have. I'll get it printed, unless you want to throw the MLP logo on the top and have it as a setup sheet before you email it to me??
I'll be back in half an hour.
I'll be back in half an hour.
06-15-2006, 03:38 AM
#14
Originally Posted by MLP#1
Marty, you have a PM. You couldn't possibly be sleeping at 4:13AM, could you?
No not sleeping but the steering is pissing me off.
Got it Done!
Any way I got the pictures to cool! The F1 is a nice car just wish more people raced them!
Last edited by Marty Peterson; 08-03-2008 at 12:47 PM.