Axiom Motors
#947
how frequent do you have to cut the comms for the 19T?
for 27t stock motors, i usually cut them after 8~10 runs.
for 27t stock motors, i usually cut them after 8~10 runs.
#953
What brush and spring combo are you runnin on the red atlas for offroad buggy and truck? Also what motor pinion do you suggest for both classes?I will be running this can for the ECT.Thanks for the help!
#955
Thanks Dave, any suggestions on what motor pinion to run, I was thinking 18 on truck and 22 on buggy with the red atlas.
#957
Tech Elite
iTrader: (7)
That depends on the track as far as pinion size. Small track may be 18 in truck and 20 in buggy, while the larger tracks you can go up 1 to 2 teeth. The Atlas reds may not have the highest numbers for touque (though they are still very good) but they sure make up for in it rpm's. I have ran mine for 3 weeks at a tight indoor track where I am geared at a 21/81 with an ASC buggy. Another team driver Larry geared his at 20 for more infield punch. At 21 mine is spinning tires almost half way down the straight.
#959
Blue you runnin at A-Main? The tracks I'm concerned with are Four Seasons,A-Main,and Tacoma all I would call small compared to say Peel It. You think I should start with 18 in the T4 and 21 in the B4 for those tracks with the red atlas? You running the ECT?