R/C Stuff Selling
05-23-2005, 10:46 PM
Stuff For Sale
Selling my 1/12 yokomo ssg 4 cells pan car. Everything for $280.00. Come with some spare & hopup parts. Will throw in a orion 13t double mod motor(not e V2) & 1 painted bodyshell & 1 new bodyshell. No servo & ESC. For additional KO digital servo plus another $70.
1 NIB Tamiya DT02 2wd buggy for sale. Selling at $80.00. Come with stock motor & stock ESC.
1 good condition Atlas type Si for sale. Only used for a couple of race. Almost fully hop with alumin steering knuckle & alumin rear hub. Selling at $450.00
Selling M04M with alfa bodyshell. Come with full ballbearing, u-shaft, ball-diff, alumin steering knuckles, motor heat sink, a few pairs of used tamiya tires & 1 set of new express tires. Everything for $200. Only play twice in e race.
Record Breaker charger for sale. In mint condition. Bought at $500, now selling at $250nett. 3 step charging only but got 10 memories.
1 NIB Futaba 9 channel 29mhz receiver for sale. Selling at $80.00
NIB Team Bomber woven graphite center shaft for Evo4. Selling at $65.00
Selling 1 good condition KO VFS-1 ESC. Used for a few races, selling at $180.00.
Also selling 1 mint condition trolly bag, e one same as Racecraft hobby shop is selling. Selling just e bag only at $35.00.
Interested please contact Tony at 97517372. Would prefer to meet at Tiong Bahru Area. Thanks.
Selling my 1/12 yokomo ssg 4 cells pan car. Everything for $280.00. Come with some spare & hopup parts. Will throw in a orion 13t double mod motor(not e V2) & 1 painted bodyshell & 1 new bodyshell. No servo & ESC. For additional KO digital servo plus another $70.
1 NIB Tamiya DT02 2wd buggy for sale. Selling at $80.00. Come with stock motor & stock ESC.
1 good condition Atlas type Si for sale. Only used for a couple of race. Almost fully hop with alumin steering knuckle & alumin rear hub. Selling at $450.00
Selling M04M with alfa bodyshell. Come with full ballbearing, u-shaft, ball-diff, alumin steering knuckles, motor heat sink, a few pairs of used tamiya tires & 1 set of new express tires. Everything for $200. Only play twice in e race.
Record Breaker charger for sale. In mint condition. Bought at $500, now selling at $250nett. 3 step charging only but got 10 memories.
1 NIB Futaba 9 channel 29mhz receiver for sale. Selling at $80.00
NIB Team Bomber woven graphite center shaft for Evo4. Selling at $65.00
Selling 1 good condition KO VFS-1 ESC. Used for a few races, selling at $180.00.
Also selling 1 mint condition trolly bag, e one same as Racecraft hobby shop is selling. Selling just e bag only at $35.00.
Interested please contact Tony at 97517372. Would prefer to meet at Tiong Bahru Area. Thanks.
05-24-2005, 01:03 AM
1. 1/10 Integy Set Up tools - $70 SOLD
Used only a few times, stored in store room since. In excellent condition, except doesn't come with the black casing. Everything else included.
2. RB trolley Bag - $30
Very used condition. No carton boxes inside. Still usable to transport everything in one bag, all you need to do is to find yourself other carton boxes to fit in the bag to transport your stuff. Not for fussy buyer.
3. Futaba PCM 1024 R113ip 75MHz reciever - $50
Used condition. Working perfectly.
4. Virtual RC adapter - $40
Played only a few times. In excellent condition. Go to www.virtualrc.com for more info.
PM me if you are interested in the stuff
Used only a few times, stored in store room since. In excellent condition, except doesn't come with the black casing. Everything else included.
2. RB trolley Bag - $30
Very used condition. No carton boxes inside. Still usable to transport everything in one bag, all you need to do is to find yourself other carton boxes to fit in the bag to transport your stuff. Not for fussy buyer.
3. Futaba PCM 1024 R113ip 75MHz reciever - $50
Used condition. Working perfectly.
4. Virtual RC adapter - $40
Played only a few times. In excellent condition. Go to www.virtualrc.com for more info.
PM me if you are interested in the stuff
05-24-2005, 01:21 AM
selling off A/C to D/C connvertor
bought it 1 day ago, at the price of $33. But li po charger cant charge from the convertor.
willing to part it at $30, with recript as proof
willing to part it at $30, with recript as proof
05-24-2005, 06:48 AM
Used ESCs
(a) LRP V7.1 Digital, no motor limit. S$120 only. Comes with Manual but does not come with a box or current limiters. The Unit has DSE female plugs soldered on the wires. Buyer will need to supply his own wiring and male plugs.
(b) LRP IPC Pro Sport Digital, no motor limit. S$90 only. Comes with Manual and Box. Dean plugs have been installed.
Both are in good working condition.
New ESC
(c) Novak GTX ESC for sale (NIB). Only opened the box to check contents. Wires have not been cut. S$225 only.
If interested in any of the above, please PM me.
Thanks for looking.
(a) LRP V7.1 Digital, no motor limit. S$120 only. Comes with Manual but does not come with a box or current limiters. The Unit has DSE female plugs soldered on the wires. Buyer will need to supply his own wiring and male plugs.
(b) LRP IPC Pro Sport Digital, no motor limit. S$90 only. Comes with Manual and Box. Dean plugs have been installed.
Both are in good working condition.
New ESC
(c) Novak GTX ESC for sale (NIB). Only opened the box to check contents. Wires have not been cut. S$225 only.
If interested in any of the above, please PM me.
Thanks for looking.
Last edited by KiwiKid; 05-26-2005 at 07:32 AM.
05-24-2005, 07:04 AM
stuff for sale.
novak cyclone 2 esc...$140..only used twice..
pit wizard $50 (nib)
interested callers please get me at 98311680
novak cyclone 2 esc...$140..only used twice..
pit wizard $50 (nib)
interested callers please get me at 98311680
05-24-2005, 07:50 AM
Selling off
- 1 x used (75mhz) Futaba 3PJS radio set (c/w 8 x AA size 2100mah sanyo batteries) for $250
- 1 x (75 mhz) Futaba PCM receiver (NIB) for $100
Kindly PM me with interested.
- 1 x used (75mhz) Futaba 3PJS radio set (c/w 8 x AA size 2100mah sanyo batteries) for $250
- 1 x (75 mhz) Futaba PCM receiver (NIB) for $100
Kindly PM me with interested.
05-24-2005, 08:16 AM
Tech Adept
.. 
Last edited by razi; 05-25-2005 at 10:09 AM.
05-24-2005, 10:30 AM
Tech Initiate
sanwa receiver 4 sale
ive got two sanwa receiver for sale... can be sold seperately.. u can drop me a sms or a call at 97994194.
05-24-2005, 12:21 PM
Super Moderator
iTrader: (76)
Join Date: Nov 2004
Location: Singapore ̡͌ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡V
Posts: 3,454
Trader Rating: 76 (100%+)
Good condition Xray FK04 comes with
- Spare Xray T1R composite chassis and batt holders
- 3 layshafts
- Spare hop up thicker and stiffer upperdeck
- Spare front shock tower
- Brand new in pack 18t fixed pulley
Box,manual,stickers are in great condition.VIP card unused.
Going for $340
Good condition Kawada SV-10 Sigma 2(ran about 10 packs) comes with many brand new spares.Will include bodyshell,tires and rims.
Going for $450
Interested parties,please leave me a pm.Thanks
- Spare Xray T1R composite chassis and batt holders
- 3 layshafts
- Spare hop up thicker and stiffer upperdeck
- Spare front shock tower
- Brand new in pack 18t fixed pulley
Box,manual,stickers are in great condition.VIP card unused.
Going for $340
Good condition Kawada SV-10 Sigma 2(ran about 10 packs) comes with many brand new spares.Will include bodyshell,tires and rims.
Going for $450
Interested parties,please leave me a pm.Thanks
Last edited by Funkymojo; 05-26-2005 at 09:01 AM.
05-24-2005, 07:00 PM
Super Moderator
iTrader: (76)
Join Date: Nov 2004
Location: Singapore ̡͌ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡V
Posts: 3,454
Trader Rating: 76 (100%+)
05-24-2005, 07:01 PM
Super Moderator
iTrader: (76)
Join Date: Nov 2004
Location: Singapore ̡͌ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡V
Posts: 3,454
Trader Rating: 76 (100%+)
05-24-2005, 08:25 PM
Stuff For SALE
Last edited by sspp; 05-28-2005 at 03:16 AM.
05-24-2005, 09:35 PM
Tech Apprentice
iTrader: (2)
Charger to let go
Good condition Nimh/Nicd Charger & Discharger to let go.
AC-DC Switching Power Supply. 4 - 8 Cells.
Interested buyers kindly leave me a pm. thanks.
AC-DC Switching Power Supply. 4 - 8 Cells.
Interested buyers kindly leave me a pm. thanks.
05-25-2005, 01:07 AM
Custom made machined aluminium spacer and shock spacer for your RC cars & trucks.
1) Shock mount spacer: $6 for 4pcs & $12 for 8pcs
2) Normal spacer: $3 for 4pcs
To order please PM or email me the dimensions you need to me at [email protected]
All query are welcome.
Attached pictures is shock spacer I made for my own use.
1) Shock mount spacer: $6 for 4pcs & $12 for 8pcs
2) Normal spacer: $3 for 4pcs
To order please PM or email me the dimensions you need to me at [email protected]
All query are welcome.
Attached pictures is shock spacer I made for my own use.
05-25-2005, 01:52 AM
Tech Initiate
Still up for sale.
Originally Posted by boatster101
hi Good day to all,
i got a set of use Traxxas E Maxx for sale at $520 , it come with stock 550 motor and esc.Just add TX and RX to run. it also come with a GPM servo protector fitted on it. Car in good condition.If interested, please sms or call me at 90625082 .
see photo here
http://usera.imagecave.com/boatster101/Picture001.jpg
Thanks for looking.
mike
:lol
i got a set of use Traxxas E Maxx for sale at $520 , it come with stock 550 motor and esc.Just add TX and RX to run. it also come with a GPM servo protector fitted on it. Car in good condition.If interested, please sms or call me at 90625082 .
see photo here
http://usera.imagecave.com/boatster101/Picture001.jpg
Thanks for looking.
mike
:lol
anyone ??