Funkymojo

iTrader: (76)

Hey Nosferatu..finally you join this forum hee hee....how's it like being the prince of darkness?? LOL

Buggyboy

Rolling chassis w/silver can motor, no hopups except for alu driveshaft, going at $120

Comes with 2 bodyshells- Tamiya Enzo Ferrari and HPI Lamborghini Gallardo.

email : [email protected]

TonyNg

Team Manager's crazy sale :-

Kyosho 1/8 GP buggy MP7.5 KE1

Selling complete with many (NIB) spare parts & following -

1) Brand new (NIB) Sirio AAC .21 buggy engine X 01 pce
2) Fioroni MP7.5 chassis X 03 pcs
(01 pce used in buggy & 02 pcs brand new (NIB))
3) RB 063 pipe X 02 pcs
(01 pce in buggy & 01 pce brand new (NIB))
4) M8 radio with about 08 sets 40 mhz crystal & 02 pcs VB servos
(Some new crystals come with crystal case)
5) Brand new (NIB) Nova plug #6 X 10 pcs
6) Brand new (NIB) MP7.5 painted bodyshell X 10 pcs
(Original Kyosho & Proline Crowd Pleazer)
7) Brand new (NIB) pre-glued Kyosho & Proline tires X 10 sets

All the above at a crazy price of S$1,000/- ONLY.
Please contact Maurice @ 9755 4328

hell_boy1014

hi ..i have a kyosho v1s2 for sale...2 months old ...never race b4.car is in good condition ....and the engine gs15 which comes orig. with kit is still good ........it consist of the car and the engine....no servo.....its has the following stuff i upgraded...

1) SP Brake Disk
2) rear Wheel shaft(for Wide Rear Foam Tyre)
3) foam tires
4)hardened aluminium disc brake holder with aluminium pulley(worth 30.00
5)) 2 speed transmission set ( worth 85.00)

it comes with CLK DTM 2002 AMG MERCEDES Body Shell
selling price sgd 160.00. pls sms me if ure interested to view 98555242
thanks

canshot

hm.. heh.. just wanna noe the price of all those itemz..
esp the M8 (item 04)

TOMJR

iTrader: (3)

Sanwa rx 311 for sale (27mhz)
selling for $70 (very good condition)
3pcs to let go

T3 turbo pipe for sale (nib) .12 size
selling for $60 (1 piece pipe)

call or sms me at 96780943

HZM

• Fabrication of hopups
• Fine tuning through modification of stock or after market parts
• Special Customization
• Perform Drill, Mill and Turn

Let me know if u are interested in getting one or checking out details, veiwing around Singapore Expo. Please note all model are table top type, minimun table area required.

Mike
H/P 92718979

genexis

Updated
Selling all these

Sirio 5 port AAC .12 engine 2 years old. But last 1 year never used at all. (new was $200 plus) *sold*
5 star exhaust pipe. Slight dent on the sidem but no performance problems. (new $120) *sold*

Bundle price: Engine + manifold + Pipe: $130 *sold*


one Sanwa ZB servo, rather new, not used a lot *reserved*
one Hitec servo, metal gears, using as throttle, no idea what is the specs (both servos new will be $150+)
2 X servos for $100

Sanwa airtronics MX3, in good condition $50
RX-311 sanwa reciever ($100+) $70


Bundle price: TX+RX+2SERVOS: $200

12V Starter box with 12 V lead acid battery (new $70) *sold*

Integy camber/castor/toe setup guages, good condition. $80


Self collect @ bishan. Interested parties, please contact me @ 96585800

Other misc stuffs:
.5 gallon of 25% nitro blue thunder *reserved*

Jack

Associated NTC3 Team Edition
With carbon composite kit
Anodized Threaded Shock Body & Collar with cap O-rings,
NTC3 Front One-Way
New rear Exhuast Tune Pipe
New ungrade Fuel tank
Blue alum hex hub
Harden CVD front and rear
Blade type anti roll bar ( front)
Rear anti roll bar
2 Speed
with new clutch bell and shoes
going off cheap
$200( neg)

Tamiya 414M2 with SSG chassis kit
Chassis is Brand new...
come with
Front Oneway
Harden susp arms ( frnt and rear)
Racing C hubs
Alum Center Pulley
Alum center oneway
Blue TRF shocks
Alum Servo mount
Alum turnbuckle
Frnt and rear CVD
Alum wheel hex hub adapter
New harden Hinge pins.
Derlin ball diff hub ( Rear)
will include ,extra derlin ball diff, derlin hubs
orginal lower chassis, upper deck and front n rear shock towers
self collection
$350

Cross FireForce F1
Built but never play
come with Rear alum pod
$100

A/E RC10LSS Full Graphite . with alum rear bulk head
$100

Tamiya EVO III
come with the following
Blue Alum gear box reinforcement. ( frnt and rear)Orig Tamiya
Front One way
Alumn steering Arms
Alumn Suspension mounts
Alumn Motor mount
Alumn propeller shaft
Alumn spur holder
Alum Hex hub
Carbon Double deck frame
Carbon Shocks towers
Carbon Body mount stays
Light weight ball differential
Front and Rear Stabilizer bars( with diff spring rating)
Harden Hinge pins
Harden arms set
TRf dampers with tamiya racing springs set
Blue alum spring retainer
Flourine coated ball ends
Ti turn buckles
2deg rear upright
got typical scratch below deck.
come with alot of spares
Bevel gears, spur gears, arms, (NIB) Carbon upper deck

X ray T1 Racer
Okie guys..
Selling a good condition Xray T1 racer on behalf of a good fren.
come with
1)Ko Propo EX 5 radio with KR200A am receiver
2)3000 sanyo batts x 2
3)Servo

basically u just charge the batt and then off u go..

selling for $400 for whole Xray package
This package does not belong to me. just helping my fren to sell it ..

Ares17

EVO5

Evo RR pic.....
RR converted evo for sale!
Letting go my EVO with following hop up

1) Top carbon fiber radio tray
2) Front and rear UJ shaft
3) Kawahra side belt tensioner
4) Kawahra rear L support brace
5) Rear titanium lighten shaft
6) all pinion and spur in 0.8 module ratio
7) Front and rear carbon fiber shock towers
8) 2 set of 5 stars springs
9) Extra rear diff drive unit
10) Radio box set up
11) Metal Mid and rear pulley
12) Mid ti lighten shaft
13) Front kawahra metal anti roll bar
14) Extra front one way drive
15) 1100mah RX hump batt
16) K.O 40mhz receiver

Lots of spare parts left.

ASking $250. Contact me at 90035540 to deal,..must go!

http://sg.pg.photos.yahoo.com/ph/dav.../ph//my_photos

bsplenden

The A/M for sale.

Inclusive of:
TEU-101BK ESC.
Tamiya Sports Tuned Motor.
Heat Sink.
Servo (With one spare).
Sanwa Blazer Tx and Rx.
Tamiya 1400SP batteries X3
Upgraded all bearings
Aluminium propeller shaft
Wall charger

Inclusive of Soft Tamiya shock Oil (yellow). (Left half bottle)
And Trinity shock oil 90wt. used a tiny bit only.

RTR. In well used condition.

Just drop me a PM with your offer.

TonyNg

Team Manager's crazy sale :-

Kyosho 1/8 GP buggy MP7.5 KE1
with 02 pcs (front & center) Nouva Faor Torsen diffs.
& Fioroni chassis
& 02 pcs Sanwa VB servos

Now selling seperately with many (NIB) spare parts & following -

1) Brand new (NIB) Sirio AAC .21 buggy engine X 01 pce
2) Fioroni MP7.5 chassis (NIB) X 02 pcs - SOLD
3) RB 063 pipe (NIB) X 01 pcs - SOLD
4) M8 radio with about 08 sets 40 mhz crystal & 02 pcs VB servos
(Some new crystals come with crystal case) - SOLD
5) Brand new (NIB) Nova plug #6 X 10 pcs - 05 pcs SOLD
6) Brand new (NIB) MP7.5 painted bodyshell X 10 pcs
(Original Kyosho & Proline Crowd Pleazer) - 04 pcs SOLD
7) Brand new (NIB) pre-glued Kyosho & Proline tires X 10 sets - 05 sets SOLD
8) Seldom use spare Sanwa RX311 (40 mhz) X 02 pcs - 01 pce SOLD
9) Seldom use spare Sanwa VB high torque servo X 02 pcs

Please contact Maurice @ 9755 4328

Speed Nosferatu

iTrader: (1)

Good condition Tamiya TRF 415 with white low friction belts,new Kawada hardened spur gear,fluorine coated TRF shocks,box,manual and some spares.Going for $420.Interested just drop me pm.Thanks

newnew

now what u into?????