R/C Stuff Selling
09-06-2004, 01:54 PM
#8716
Re: To Han Solo of HS Hobby
Originally posted by phlim
This serves as a notification to Han Solo of HS Hobby of the following: You have an unacceptable avatar, please change it immediately. Your non compliance could result in further actions deemed necessary. You may wish to read through the history of this thread, if you need further clarification: Click Here to Read After which I trust that a man of your integrity would surely know and would do the necessary.
The following would be a suggestion to Han Solo of HS Hobby to consider: This is a members site, it is not appropriate for a shop to advertise its wares here - I know it is a fine thin line, so don't flame me first. We have members who peddle their used wares and we even welcome those we had personal wares which are still NIB. But in the case of HS Hobby, it is quite clear that you are using this Forum to sell your products as a Biz. May I advise that you consider the following information: Click here to Read on Advertising and I trust that a man of your standing would know and would do the necessary.
Thanks and I am sure the consumer community (myself included) looks forward to your continued support and participation within the appropriate boundaries.
Best Regards
phlim
This serves as a notification to Han Solo of HS Hobby of the following: You have an unacceptable avatar, please change it immediately. Your non compliance could result in further actions deemed necessary. You may wish to read through the history of this thread, if you need further clarification: Click Here to Read After which I trust that a man of your integrity would surely know and would do the necessary.
The following would be a suggestion to Han Solo of HS Hobby to consider: This is a members site, it is not appropriate for a shop to advertise its wares here - I know it is a fine thin line, so don't flame me first. We have members who peddle their used wares and we even welcome those we had personal wares which are still NIB. But in the case of HS Hobby, it is quite clear that you are using this Forum to sell your products as a Biz. May I advise that you consider the following information: Click here to Read on Advertising and I trust that a man of your standing would know and would do the necessary.
Thanks and I am sure the consumer community (myself included) looks forward to your continued support and participation within the appropriate boundaries.
Best Regards
phlim
1) avatar changed(i understand some ppl here dont like women)
2)to date 55 posts since 2003(there are lots of others with thousands, dunno they also running biz here?)
3)the thing ive been posting is only the same engine,same posting, nothing else. (dont worry not running my biz here).
3)thanks for posting this here(Im sure the PM you send to me wasnt enough).can post in new paper also.
09-06-2004, 11:53 PM
#8718
Team Magic G4
Team Magic G4-E Class
a)I hve a new in box Team Magic car kit 'E' Class for sale for $330.....
complete with:
protoform bodyshell 2.1;
1 set of foam tyres;
centax clutch...basically a pro kit !!!
b)a NIB 4mm chassis K-factory chassis..sellin at $70..
c)NIB OS trp-t....5 port turbo... $220
a)+b)=$380 or
a)+b)+c)=$590..just put ur rx n tx n servos...
pm me for details....
a)I hve a new in box Team Magic car kit 'E' Class for sale for $330.....
complete with:
protoform bodyshell 2.1;
1 set of foam tyres;
centax clutch...basically a pro kit !!!
b)a NIB 4mm chassis K-factory chassis..sellin at $70..
c)NIB OS trp-t....5 port turbo... $220
a)+b)=$380 or
a)+b)+c)=$590..just put ur rx n tx n servos...
pm me for details....
09-07-2004, 02:31 AM
#8719
hyper7 for sale
SOLD!
Well maintained Hobao Hyper 7 Pro.
Rolling chassis with lots of spares and hopups.
Asking for $380 and features:
- Front and centre torsens
- Rear Spider Diff (10k oil)
- 'long' chassis
- Purple 7075 front and rear suspension blocks (3 pcs altogether)
- Kanai II shocks (3.5mm shafts)
- Stock hobao shocks
- 2 stock engine mounts (locknut style) + one set of kyosho style mounts
- Lowered engine mount spacer
- Lightweight steering posts
- Lightweight brake-cams
- Lightweight wheel hubs and hexes (7075, milled out)
- 2 sets (frnt/rear) of shocktowers (5mm CNC type and graphite type)
- laydown conversion (graphite tray and alum. posts for conversion back to stand-up servos also included)
Spares/extra stuff:
- Another 'long' chassis (NIP)
- NIP Frnt and Rear Arms
- NIP brake pads
- 2 x original standard diffs
- Rebuild kit for spider diff
- NIP spare drive cups for centre and front torsens
- Assortment of new and used CVDs and u-shafts (front, rear and centre)
- Spare Kanai II shock shafts (frnt/rear) and plastic parts tree (all new)
Interested pls PM. Thanks!
Well maintained Hobao Hyper 7 Pro.
Rolling chassis with lots of spares and hopups.
Asking for $380 and features:
- Front and centre torsens
- Rear Spider Diff (10k oil)
- 'long' chassis
- Purple 7075 front and rear suspension blocks (3 pcs altogether)
- Kanai II shocks (3.5mm shafts)
- Stock hobao shocks
- 2 stock engine mounts (locknut style) + one set of kyosho style mounts
- Lowered engine mount spacer
- Lightweight steering posts
- Lightweight brake-cams
- Lightweight wheel hubs and hexes (7075, milled out)
- 2 sets (frnt/rear) of shocktowers (5mm CNC type and graphite type)
- laydown conversion (graphite tray and alum. posts for conversion back to stand-up servos also included)
Spares/extra stuff:
- Another 'long' chassis (NIP)
- NIP Frnt and Rear Arms
- NIP brake pads
- 2 x original standard diffs
- Rebuild kit for spider diff
- NIP spare drive cups for centre and front torsens
- Assortment of new and used CVDs and u-shafts (front, rear and centre)
- Spare Kanai II shock shafts (frnt/rear) and plastic parts tree (all new)
Interested pls PM. Thanks!
Last edited by pineapplet; 09-13-2004 at 05:27 AM.
09-07-2004, 07:42 AM
#8721
Tech Rookie
Re: Team Losi Mini T for sale
Upgrades:
- Full bearings at all wheels
- Adjustable aluminium oil shocks (blue)
- Rear CVDs (universal-joint drive shafts)
- Anti-roll bar
- Multiplex 280BB ball-raced rebuildable carbon-brushed motor
- New body shell, painted w LED head and tail lights
Very good condition, selling for $250. Negotiable...
Please email me at: [email protected]
Batteries NOT included
- Full bearings at all wheels
- Adjustable aluminium oil shocks (blue)
- Rear CVDs (universal-joint drive shafts)
- Anti-roll bar
- Multiplex 280BB ball-raced rebuildable carbon-brushed motor
- New body shell, painted w LED head and tail lights
Very good condition, selling for $250. Negotiable...
Please email me at: [email protected]
Batteries NOT included
09-07-2004, 08:44 AM
#8722
receiver battery charger
looking for receuver bettery charger..if i am not wrong the name is ex pro 14 for mtx 3...pm me asap
09-07-2004, 09:36 AM
#8723
Tech Regular
Re: Hudy Ultimate Set-up System for All 1/10 Touring Cars
SOLD
Last edited by faiunie; 09-17-2004 at 09:26 AM.
09-07-2004, 10:07 PM
#8725
Giving up nitro, selling my Monster Pirate Dominator,comes with:
- 1 Sanwa VB servo for steering
- 1 KO fail safe
- RB 86 tune pipe
- stock center slip diff
- additional 2 speed center gear and 2 pieces of 2 speed gears
- Venom temp probe (no idea whether still working now,
but was working fine before battery went dead)
- 2 sets of MT wheels, dominator chrome wheels/tires and Monster Pirate yellow wheels/tires
- RB air filter, with new spare sponge
- some spare arms,dogbones/drive shafts
- some spare gears
- hyper 21 8 port engine, compression still good,just need cleaning & retune
-spare new pullstart
- spare RB 063 tune pipe used few times only
- glow heater w wall charger
- can convert to buggy with the included hyper 7 shell/wing mount/wing/body mount and
the 2 speed gear mentioned above.
- 1 set of buggy on road wheels/1 set off road
- 1 set of NIP buggy tires
- 2 spare ofna tuned pipes
-will give away a bottle of unused Byron 25% nitro fuel
asking for 380 neg.interested pls pm me.tks
self collect at Bishan
*sold*
- 1 Sanwa VB servo for steering
- 1 KO fail safe
- RB 86 tune pipe
- stock center slip diff
- additional 2 speed center gear and 2 pieces of 2 speed gears
- Venom temp probe (no idea whether still working now,
but was working fine before battery went dead)
- 2 sets of MT wheels, dominator chrome wheels/tires and Monster Pirate yellow wheels/tires
- RB air filter, with new spare sponge
- some spare arms,dogbones/drive shafts
- some spare gears
- hyper 21 8 port engine, compression still good,just need cleaning & retune
-spare new pullstart
- spare RB 063 tune pipe used few times only
- glow heater w wall charger
- can convert to buggy with the included hyper 7 shell/wing mount/wing/body mount and
the 2 speed gear mentioned above.
- 1 set of buggy on road wheels/1 set off road
- 1 set of NIP buggy tires
- 2 spare ofna tuned pipes
-will give away a bottle of unused Byron 25% nitro fuel
asking for 380 neg.interested pls pm me.tks
self collect at Bishan
*sold*
Last edited by rcaddict; 09-12-2004 at 11:05 PM.
09-07-2004, 10:11 PM
#8726
Tech Adept
R/C Stuff for sale....
Rclab 7.7 pro with all alu parts $270
Tamiya F201 almost fully hop with ti screw $250
Both cars are in good condition.
Intersted buyer may contact Tangfa @91618928. Pls do not PM.
Rclab 7.7 pro with all alu parts $270
Tamiya F201 almost fully hop with ti screw $250
Both cars are in good condition.
Intersted buyer may contact Tangfa @91618928. Pls do not PM.
09-07-2004, 10:18 PM
#8727
Faster buy....
Serpent Starter Box in good condition for sale. Will include two 1800mah stick packs...
Asking $90
PM me.
Asking $90
PM me.
09-07-2004, 10:45 PM
#8728
Tech Addict
Join Date: May 2002
Location: relax.......... i'm not really serious......
Posts: 501
MRX3 1/8 on-road.
-rear option anti-rollbar
-option pink springs
- option ventilated disc brake
- spares...
- 3 used bodyshells
- one used pipe
............ $380. PM me.
-rear option anti-rollbar
-option pink springs
- option ventilated disc brake
- spares...
- 3 used bodyshells
- one used pipe
............ $380. PM me.
09-07-2004, 11:20 PM
#8729
Sanwa 27mHz module, 311 rx, one pair crystal. All new ---> $160
NIP Tobee Craft Aluminium shaft for Pro4 ---> $18
NIP Square Finned Motor Mount
NIP Take Off purple servo mount screw ---> $9
NIP Square purple square washer --->$7.50
New Tamiya Xanavi Nismo (R34) bodyshell --->$45
TL01 with alot of hopups and spares !!!!
http://www.jcube-hobby.com/forum/showthread.php?t=734
Contact me thru pm or 91832223 for more details
NIP Tobee Craft Aluminium shaft for Pro4 ---> $18
NIP Square Finned Motor Mount
NIP Take Off purple servo mount screw ---> $9
NIP Square purple square washer --->$7.50
New Tamiya Xanavi Nismo (R34) bodyshell --->$45
TL01 with alot of hopups and spares !!!!
http://www.jcube-hobby.com/forum/showthread.php?t=734
Contact me thru pm or 91832223 for more details
Last edited by ali_g; 09-09-2004 at 11:01 AM.
09-07-2004, 11:23 PM
#8730
Tamiya F201 for sale
1 week old F201 "Ferrari F2001" kit
1 week old Tamiya TEU-101BK ESC
1 week old Hitech Servo
Less than 10min of running time
Three fine stratch on chassis
Used Tamiya Super Stock Type R motor
NIB Stock motor include in the kit
Just like NEW!
All for $220,
or $180 without ESC & Type R motor
Pls SMS me 94889469 if interested
TKS
1 week old Tamiya TEU-101BK ESC
1 week old Hitech Servo
Less than 10min of running time
Three fine stratch on chassis
Used Tamiya Super Stock Type R motor
NIB Stock motor include in the kit
Just like NEW!
All for $220,
or $180 without ESC & Type R motor
Pls SMS me 94889469 if interested
TKS
Last edited by kansai; 09-16-2004 at 09:14 PM.