R/C Stuff Selling
Tech Rookie
BNIB Ellegi 1/10 tires
Brand New Ellegi 1/10 foam tyres:
1 box of 26mm/37sh (ELLEGI RR 1:10 DTM.26.37.GRP-R-W)
2 boxes of 26mm/40sh (ELLEGI FR 1:10 DTM.26.40.GRP-R-W)
$30 for all 3 boxes, self collect in Bukit Batok.
SMS me at 98429201.
1 box of 26mm/37sh (ELLEGI RR 1:10 DTM.26.37.GRP-R-W)
2 boxes of 26mm/40sh (ELLEGI FR 1:10 DTM.26.40.GRP-R-W)
$30 for all 3 boxes, self collect in Bukit Batok.
SMS me at 98429201.
Tech Elite
iTrader: (4)
Selling :
1) A very Good Compession .12 Sirio 5 port Turbo Engine
New Bearing ( Interval servicing )
use as a spare engine for leisure , not race before
play at PA track, No Problem
selling at $200 without the clutch system and will throw in standard engine mounting ( Not one piece mounting )
2) NB16 buggy Hop-up One piece Alloy Tune Pipe
only used twice ( Selling cos sold off the buggy )
Selling at $30
sms 97284522 to Deal
thank you
1) A very Good Compession .12 Sirio 5 port Turbo Engine
New Bearing ( Interval servicing )
use as a spare engine for leisure , not race before
play at PA track, No Problem
selling at $200 without the clutch system and will throw in standard engine mounting ( Not one piece mounting )
2) NB16 buggy Hop-up One piece Alloy Tune Pipe
only used twice ( Selling cos sold off the buggy )
Selling at $30
sms 97284522 to Deal
thank you
Last edited by maskedrider; 09-13-2006 at 06:24 AM.
TRINITY MOTOR - 12T
USED TRINITY MOTOR - 12 - 15 TURN, ARMATURE JUST NEWLY LATHED ONLY ONCE. NEW BRUSH INSTALLED. SELLING FOR S$40.00.
INTERESTED DO SMS ME AT 94508610.
ALSO SELLING WITH NOVAK SPEED CONTROLLER WITH BRAKE LIGHT LED KIT.
ONLY S$100.00 TOGETHER WITH THE ABOVE MOTOR.
VERY GOOD FOR DRIFTING.
INTERESTED DO SMS ME AT 94508610.
ALSO SELLING WITH NOVAK SPEED CONTROLLER WITH BRAKE LIGHT LED KIT.
ONLY S$100.00 TOGETHER WITH THE ABOVE MOTOR.
VERY GOOD FOR DRIFTING.
Tech Rookie
FS: XB8
Giving up hobby and selling off 1 XB8 with 421b engine.Tons of spares.asking $550 OR ($350 for roller)self collect thanks!96256567
Selling few thing here:
1. NIB 42 shore ellegi rear tires 2 pack - $10 each pack
2. JPL buggy pipe and manifold (no dent,very good cond) - $50 (revised)
3. NIB Manifold for 12 size engine (coupling type) - $20
4. NIB MTX 3 front and rear belt-$8 for both (SOLD)
5. NIB KFactory ventilated disc brake for mtx3/4 - $8
Anyone interested just sms me at 93839473
Thx
1. NIB 42 shore ellegi rear tires 2 pack - $10 each pack
2. JPL buggy pipe and manifold (no dent,very good cond) - $50 (revised)
3. NIB Manifold for 12 size engine (coupling type) - $20
4. NIB MTX 3 front and rear belt-$8 for both (SOLD)
5. NIB KFactory ventilated disc brake for mtx3/4 - $8
Anyone interested just sms me at 93839473
Thx
ur stuffsfor sale
Tech Rookie
Hi anyone interested to buy a more than a month old XRAY XB8R. I just used it to break-in and tuning the engine. Never been used to run in real track (e.g. turf city). There are few scratches but still brand new. I am thinking to switch to other brand.... Anyone interested pls PM me or you can send me sms to 94508284. Asking price is only $550 but still negotiable.
Lowering the Price @400
Pls check PIC here!!!
Lowering the Price @400
Pls check PIC here!!!
Tech Lord
iTrader: (32)
Selling Xray XRA352651 Ball Stud 5.8mm With Backstop (2)
XRA352651 Ball Stud 5.8mm With Backstop (2)
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy jump. Manufactured from world-renown Hudy Spring Steel™. Set of 2. Must be installed in the ball joints first, then afterwards to the steering blocks.
http://www.teamhelotes.com/~main/sit.../xra352651.jpg
Bought for $35 a pair. I have 2 pairs. Used one time only. Interested buyer pls sms me 94564029 alan
I also have XRA352174 Steel Eccentric Bushing 1 Degree V2 (2) bought $21.used once only.
http://www.teamhelotes.com/~main/sit.../xra352174.jpg
I am selling all this hop up because my xray is a team hetoles truggy with mod crt long arms not using xray arms.
Ball stud 5.8mm with backstop. Recommended for installation on steering blocks to prevent the steering linkages from disconnecting after a heavy jump. Manufactured from world-renown Hudy Spring Steel™. Set of 2. Must be installed in the ball joints first, then afterwards to the steering blocks.
http://www.teamhelotes.com/~main/sit.../xra352651.jpg
Bought for $35 a pair. I have 2 pairs. Used one time only. Interested buyer pls sms me 94564029 alan
I also have XRA352174 Steel Eccentric Bushing 1 Degree V2 (2) bought $21.used once only.
http://www.teamhelotes.com/~main/sit.../xra352174.jpg
I am selling all this hop up because my xray is a team hetoles truggy with mod crt long arms not using xray arms.
HPI MT2 for sale !
As above.About slightly 9 months. ..New about $500+@ Comes with the :-Pullstarter -stadium truck -T-15 -Tuned Pipe extra performance (hot bodies) -Geolandar Tires -New glow plug underhead -New Spur gear Unavoidable scratches below chasis.NO RX.TX INCLUDED. -New glow plug (bought together with the underhead) Letting go at $350 REVISED with ADDITIONAL FREEBIES AND SPARES.Manual available online. has been fitted with new heavy duty gear set,new gearbox ,high bearings with spares!.RIms have been spray high temp spray and ADDITIONAL Chrome HPI RIMS AND DIRTHAWG TIRES.Pm me or email [email protected] for further details or neg.need to LET go FAST,Clearing my toys!!!
Last edited by ofna; 10-01-2006 at 08:32 AM.
tt-01 for sale!
a set of tt-01 for sale..
1. rolling chassis with installed bearings and few spares
2. 2x alum shaft
3. carbon upper plate
4. used rsx cover
5. printed tt-01d manual from tamiya website
6. a few spur and pinion gears
7. 2x sets of tires [rubbers/pvc]
1-7 whole set no electronics $130 just 1 sanwa 101 servo,
got a 2in1 old tamiya esc and rx on the car but cannot rev will include it in...
8. 2x used batt
9. 'super' wall charger
8-9 batts and charger for $30...
10. 3x motors --> sports tuned/orion/silvercan[unused]
will let go for the motors @ $10 each both $30 lah,
sports tuned and orion is used, orion no cables need to solder,
the silvercan is a johnson motor i think and unsed very new...
11. blazer pistol controller with 2x crystals for tx & rx (AM 40.715)
selling the pistol controller with no servo and rx for $40...
if u get the whole set, the car is drivable and driftable only that the old esc
cannot reverse.. can come and view.. stayin in west..
set already sold!! thanx for viewing....
1. rolling chassis with installed bearings and few spares
2. 2x alum shaft
3. carbon upper plate
4. used rsx cover
5. printed tt-01d manual from tamiya website
6. a few spur and pinion gears
7. 2x sets of tires [rubbers/pvc]
1-7 whole set no electronics $130 just 1 sanwa 101 servo,
got a 2in1 old tamiya esc and rx on the car but cannot rev will include it in...
8. 2x used batt
9. 'super' wall charger
8-9 batts and charger for $30...
10. 3x motors --> sports tuned/orion/silvercan[unused]
will let go for the motors @ $10 each both $30 lah,
sports tuned and orion is used, orion no cables need to solder,
the silvercan is a johnson motor i think and unsed very new...
11. blazer pistol controller with 2x crystals for tx & rx (AM 40.715)
selling the pistol controller with no servo and rx for $40...
if u get the whole set, the car is drivable and driftable only that the old esc
cannot reverse.. can come and view.. stayin in west..
set already sold!! thanx for viewing....
Last edited by nsr182; 09-25-2006 at 11:37 PM.
WTS 3PK module + Rx (price reduced)
reduced to $180.
Originally Posted by jtansoon
Selling a new Futaba PK-FSM module for 3PK (75 mhz) and HRS R303FHS rx (75 mhz).
Asking for $200.
Interested, pls sms me at 96832820.
thanks
Asking for $200.
Interested, pls sms me at 96832820.
thanks
Tech Master
iTrader: (40)
Originally Posted by hardrider
The legendary Kyosho Lazer ZXR for sale!!!
Used but not abused.
-BRAND NEW (uncut, unpainted) bodyshell and undertray set.
If you want to save the hassle, I have a BRAND NEW cut but unpainted set as an option.
-BRAND NEW LAW12 hyper clutch set.
-BRAND NEW spur gear.
-NEW bearings in gearbox.
-NEWLY FABRICATED 4mm shock tower.
-Ball diffs front and rear (just rebuilt with NEW parts.
-Universal joint shafts at ALL corners.
-Upgraded/updated to Team Associated hard anodised shocks.
-1 run old Tamiya tyres.
-6pcs of NEW swingarms(2F, 4R) Not pictured.
-Spur gear cover included. Not pictured.
-Spare ZX rear shock tower. Not pictured.
Addition:
-Sanwa 102 servo.
Still $200 for the lot above
Please call/sms 98556038 to deal.
Thanks for looking
Used but not abused.
-BRAND NEW (uncut, unpainted) bodyshell and undertray set.
If you want to save the hassle, I have a BRAND NEW cut but unpainted set as an option.
-BRAND NEW LAW12 hyper clutch set.
-BRAND NEW spur gear.
-NEW bearings in gearbox.
-NEWLY FABRICATED 4mm shock tower.
-Ball diffs front and rear (just rebuilt with NEW parts.
-Universal joint shafts at ALL corners.
-Upgraded/updated to Team Associated hard anodised shocks.
-1 run old Tamiya tyres.
-6pcs of NEW swingarms(2F, 4R) Not pictured.
-Spur gear cover included. Not pictured.
-Spare ZX rear shock tower. Not pictured.
Addition:
-Sanwa 102 servo.
Still $200 for the lot above
Please call/sms 98556038 to deal.
Thanks for looking
Last edited by hardrider; 09-14-2006 at 05:46 AM.
1/10 SET-UP BOARD BY TM
NEW 1/10 SET-UP BOARD BY TM SELLING FOR S$35.00.
INTERESTED DO SMS ME AT 94508610. GIVING UP TOURING CAR.
INTERESTED DO SMS ME AT 94508610. GIVING UP TOURING CAR.
Super Moderator
iTrader: (76)
Join Date: Nov 2004
Location: Singapore ̡͌ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡V
Posts: 3,454
Trader Rating: 76 (100%+)
Schulze future 58ce brushless esc and LMT Basic 4200 brushless motor set, slight scratches on the motor. Great for 1/10 onroad or offroad cars. For sale at $250. Anyone interested, drop me a pm. Thanks
Schulze Future 58ce Specs :
- Current (A): 58/77
- No of cells: 6-10 cells
LMT Brushless Motor Info
Reserved
Schulze Future 58ce Specs :
- Current (A): 58/77
- No of cells: 6-10 cells
LMT Brushless Motor Info
Reserved
Last edited by Funkymojo; 09-13-2006 at 08:16 PM.