R/C Stuff Selling
08-31-2006, 03:58 AM
Tech Initiate
Vintage Tamiya Madcap for Sale!
Vintage MADCAP(never run B4) c/w MSC and original Johnson motor....wing is somewhere in my storeroom...buggy is dusty in condition...Going for S$100/-(firm).
2 pcs GP3300s(side by side)---S$50 for both. Comes with free box for holding the batteries.
Please PM me. Thank you!
2 pcs GP3300s(side by side)---S$50 for both. Comes with free box for holding the batteries.
Please PM me. Thank you!
08-31-2006, 05:14 AM
Tech Rookie
Brand New OFNA Controller
Brand New AM Transmitter with Receiver and a pair of Cystal.
Asking S$60.
Interested, kindly PM me. Thanks!
Asking S$60.
Interested, kindly PM me. Thanks!
08-31-2006, 07:13 AM
- Brand new Advan Courage LC70 cover...From my F103GT set...Never used, not even put on car...Comes with the black rims for the LC70...
Asking for S$70...
Preferably deal at Bishan...
- Kyosho Mini-Z PCB with Single Layer FET Upgrade...$100 (Neg)...
** PM me for assembled car...
** Selling due to too many cars for a pair of hands to handle...
- Kyosho Mini-Z AWD PCB with Single Layer FET Upgrade...$100 (Neg)...
**Comes with servo portion...
PM me for more details and etc...SMS me @ 9781 7990 also can, but not instant reply...Sorry about that...
Thanks ppl...
Asking for S$70...
Preferably deal at Bishan...
- Kyosho Mini-Z PCB with Single Layer FET Upgrade...$100 (Neg)...
** PM me for assembled car...
** Selling due to too many cars for a pair of hands to handle...
- Kyosho Mini-Z AWD PCB with Single Layer FET Upgrade...$100 (Neg)...
**Comes with servo portion...
PM me for more details and etc...SMS me @ 9781 7990 also can, but not instant reply...Sorry about that...
Thanks ppl...
08-31-2006, 07:20 AM
Tech Adept
FOR SALE
Item for sale!!
1. Futaba HRS 75mhz receiver new in box.
- $120 neg
2. HYPER 7 FOR SALE. Call for detail.
Interested pls call 93832088 Adrian.
cheers
1. Futaba HRS 75mhz receiver new in box.
- $120 neg
2. HYPER 7 FOR SALE. Call for detail.
Interested pls call 93832088 Adrian.
cheers
08-31-2006, 07:39 AM
Tech Rookie
-Hop up Kyosho V-one R with O.S. 12TR Engine (no electronics)
-Receiver battery still on chassis; lazy to dismantle
-Dodge Stratus bodyshell.
-Serpent Starter kit (no batts).
Note: Had been collecting dust in my storeroom, engine may need servicing. Else just add electronics and fuel, you are ready to go!
All for only $200.00...
-Receiver battery still on chassis; lazy to dismantle
-Dodge Stratus bodyshell.
-Serpent Starter kit (no batts).
Note: Had been collecting dust in my storeroom, engine may need servicing. Else just add electronics and fuel, you are ready to go!
All for only $200.00...
08-31-2006, 05:42 PM
Tech Apprentice
Due to the huge amount of SMS received, I had already lost track on who's who and who reserved what.. As such, I will not allow reservations (With exception to the 2 guys I will be meeting @ Bouna Vista) and items are sold at First-Come-First-Serve-Basis.
Please call/sms 93878033 to confirm the item's availability.
I regret the inconvenience caused.
Thanks
Please call/sms 93878033 to confirm the item's availability.
I regret the inconvenience caused.
Thanks
Originally Posted by Nightstar
Your 1/2 price store!! 
*Tamiya is a vendor that displays their pricing for their items in "Yen" on the item so there
is no way I can lie on the pricing below. Should you be in doubt, please print out the pricelist
and reference can be taken from StarGek.
All hopups are used less than 2 weeks.
TT01 ran less than 10 times.
TEU-101BK + Tamiya Expec + Receiver + 1500mah Nicad (Sold!)
Stock Servo - $15.00
TT01 Rolling Chassis - $100.00
- Front 1 way ball differential
Original Pricing: 3800 Yen (SGD $66.50 )
Selling At: $35.00
*I need your stock TT01 Front Plastic Diff
- Rear ball differential
Original Pricing: 2600 Yen (SGD $45.50 )
Selling At: Reserved
- Full ball bearings replacement
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
*I need your standard bearings
- Aluminium Prop Shaft
Original Pricing: 500 Yen (SGD $8.75 )
Selling At: $4.00
- Steering Link
Original Pricing: 2200 Yen (SGD $38.50 )
Selling At: Reserved
- Steering Set
Original Pricing: 2800 Yen (SGD $49.00 )
Selling At: Reserved
- Front Stabilizers
Original Pricing: 1400 Yen (SGD $24.50 )
Selling At: $13.00
- Rear Stabilizers
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
- Carbon Upper Deck
Original Pricing: 1200 Yen (SGD $21.00 )
Selling At: Reserved
- CVA Shocks
Original Pricing: 1800 Yen (SGD $31.50 )
Selling At: $16.00
*I need 1 of your stock shocks
- Springs set
Original Pricing: 1000 Yen (SGD $17.50)
Selling At: $9.00
- Front upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Reserved
- Front tie buckle set
Original Pricing: 450 Yen (SGD $7.80 )
Selling At: Reserved
- Rear upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Reserved
- 24T/25T Pinion
Original Pricing: 400 Yen (SGD $7.00)
Selling At: Reserved
55T/58T Spur gear sets
Original Pricing: 600 Yen (SGD $10.50 )
Selling At: Reserved
- TLU-01 Lights Assy
Original Pricing: 3400 Yen (SGD $59.50 )
Selling At: Given away and in turn, knew someone great
Should you be interested in any of the abv, contact me @ 93878033 to get yours today!! Self collect @ Simei MRT Station
*Tamiya is a vendor that displays their pricing for their items in "Yen" on the item so there
is no way I can lie on the pricing below. Should you be in doubt, please print out the pricelist
and reference can be taken from StarGek.
All hopups are used less than 2 weeks.
TT01 ran less than 10 times.
TEU-101BK + Tamiya Expec + Receiver + 1500mah Nicad (Sold!)
Stock Servo - $15.00
TT01 Rolling Chassis - $100.00
- Front 1 way ball differential
Original Pricing: 3800 Yen (SGD $66.50 )
Selling At: $35.00
*I need your stock TT01 Front Plastic Diff
- Rear ball differential
Original Pricing: 2600 Yen (SGD $45.50 )
Selling At: Reserved
- Full ball bearings replacement
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
*I need your standard bearings
- Aluminium Prop Shaft
Original Pricing: 500 Yen (SGD $8.75 )
Selling At: $4.00
- Steering Link
Original Pricing: 2200 Yen (SGD $38.50 )
Selling At: Reserved
- Steering Set
Original Pricing: 2800 Yen (SGD $49.00 )
Selling At: Reserved
- Front Stabilizers
Original Pricing: 1400 Yen (SGD $24.50 )
Selling At: $13.00
- Rear Stabilizers
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
- Carbon Upper Deck
Original Pricing: 1200 Yen (SGD $21.00 )
Selling At: Reserved
- CVA Shocks
Original Pricing: 1800 Yen (SGD $31.50 )
Selling At: $16.00
*I need 1 of your stock shocks
- Springs set
Original Pricing: 1000 Yen (SGD $17.50)
Selling At: $9.00
- Front upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Reserved
- Front tie buckle set
Original Pricing: 450 Yen (SGD $7.80 )
Selling At: Reserved
- Rear upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Reserved
- 24T/25T Pinion
Original Pricing: 400 Yen (SGD $7.00)
Selling At: Reserved
55T/58T Spur gear sets
Original Pricing: 600 Yen (SGD $10.50 )
Selling At: Reserved
- TLU-01 Lights Assy
Original Pricing: 3400 Yen (SGD $59.50 )
Selling At: Given away and in turn, knew someone great
Should you be interested in any of the abv, contact me @ 93878033 to get yours today!! Self collect @ Simei MRT Station
09-01-2006, 12:49 AM
Tech Initiate
MADCAP SOLD!!!
Originally Posted by mini19
Vintage MADCAP(never run B4) c/w MSC and original Johnson motor....wing is somewhere in my storeroom...buggy is dusty in condition...Going for S$100/-(firm). SOLD!!!
2 pcs GP3300s(side by side)---S$50 for both. Comes with free box for holding the batteries. (Reserved)
Please PM me. Thank you!
2 pcs GP3300s(side by side)---S$50 for both. Comes with free box for holding the batteries. (Reserved)
Please PM me. Thank you!
09-01-2006, 12:55 AM
SOLD
Last edited by Kenneth Tan; 10-25-2006 at 12:12 AM.
09-01-2006, 02:09 AM
Tech Adept
M04M Alfa Romeo Gulia Sprint Kit NEW IN BOX unassembled wif the below all NEW IN PACKAGE (NOTE: Alfa body wheel wells have been very well cut)
1. Tamiya M03 Ball Bearing Set 53348
2. Lightweight Kingpins 53141
3. M03 Universal Shaft Set 53597
4. Fluorine Coated 5mm aluminium ball connectors 53598
5. 6mm Aluminium wheel hub 53569
6. TL01 Adj. Upper Arm Set 53303
7. 3X32mm titanium Turnbuckles 53527
8. Anti Wear Grease 53439
9. Shim set 53585
10. Toe In rear uprights 53345
11. M04 alumimium Motor heat sink 53389
12. TL01 Hollow carbon gear shaft 53322
13. TA03 Ball Diff 53267
14. Rover Mini Cooper '94 Monte Carlo Plate wheels 50676
Kit alone cost $150. Abv parts all cost me $250. Do the math. I am only asking $250 for the whole lot. No offers lesser than this pls. This is my last attempt to sell. So its like buying parts and getting a free car.
HPI Honda Civic EK9 Body shell. New in package. Not the sedan. This is the hatckback. And its very rare. Unable to find anywhere already. Note: This will only fit cars which are 225 mm wheelbase only. Which is the HPI RS4 Mini, M03M & M04M. Other Mini cars also can. Have to mod abit. $60. I paid alot for shipping.
Note: Will only sell civic bodies after car is sold. Strictly for sale, no trades. Self collect only. No freebies. thanks
1. Tamiya M03 Ball Bearing Set 53348
2. Lightweight Kingpins 53141
3. M03 Universal Shaft Set 53597
4. Fluorine Coated 5mm aluminium ball connectors 53598
5. 6mm Aluminium wheel hub 53569
6. TL01 Adj. Upper Arm Set 53303
7. 3X32mm titanium Turnbuckles 53527
8. Anti Wear Grease 53439
9. Shim set 53585
10. Toe In rear uprights 53345
11. M04 alumimium Motor heat sink 53389
12. TL01 Hollow carbon gear shaft 53322
13. TA03 Ball Diff 53267
14. Rover Mini Cooper '94 Monte Carlo Plate wheels 50676
Kit alone cost $150. Abv parts all cost me $250. Do the math. I am only asking $250 for the whole lot. No offers lesser than this pls. This is my last attempt to sell. So its like buying parts and getting a free car.
HPI Honda Civic EK9 Body shell. New in package. Not the sedan. This is the hatckback. And its very rare. Unable to find anywhere already. Note: This will only fit cars which are 225 mm wheelbase only. Which is the HPI RS4 Mini, M03M & M04M. Other Mini cars also can. Have to mod abit. $60. I paid alot for shipping.
Note: Will only sell civic bodies after car is sold. Strictly for sale, no trades. Self collect only. No freebies. thanks
09-01-2006, 03:18 AM
Tech Apprentice
Latest updates
Stock Servo - $15.00
TT01 Rolling Chassis - $100.00
- CVA Shocks
Original Pricing: 1800 Yen (SGD $31.50 )
Selling At: $16.00
*I need 1 of your stock shocks
- Springs set
Original Pricing: 1000 Yen (SGD $17.50)
Selling At: $9.00
- Front Stabilizers
Original Pricing: 1400 Yen (SGD $24.50 )
Selling At: $13.00
- Rear Stabilizers
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
- Full ball bearings replacement
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
*I need your standard bearings
- Aluminium Prop Shaft
Original Pricing: 500 Yen (SGD $8.75 )
Selling At: $4.00
- Front 1 way ball differential
Original Pricing: 3800 Yen (SGD $66.50 )
Selling At: $35.00
*I need your stock TT01 Front Plastic Diff
[quote author=nightstar board=Trading thread=1111028498 post=1156989874]Due to the huge amount of SMS received, I had already lost track on who's who and who reserved what.. As such, I will not allow reservations (With exception to the 2 guys I will be meeting @ Bouna Vista) and items are sold at First-Come-First-Serve-Basis.
Please call/sms 93878033 to confirm the item's availability.
I regret the inconvenience caused.
Thanks
************************************************** **
Your 1/2 price store!!
*Tamiya is a vendor that displays their pricing for their items in "Yen" on the item so there
is no way I can lie on the pricing below. Should you be in doubt, please print out the pricelist
and reference can be taken from StarGek.
All hopups are used less than 2 weeks.
TT01 ran less than 10 times.
TEU-101BK + Tamiya Expec + Receiver + 1500mah Nicad (Sold!)
Stock Servo - $15.00
TT01 Rolling Chassis - $100.00
- Front 1 way ball differential
Original Pricing: 3800 Yen (SGD $66.50 )
Selling At: $35.00
*I need your stock TT01 Front Plastic Diff
- Rear ball differential
Original Pricing: 2600 Yen (SGD $45.50 )
Selling At: Sold!
- Full ball bearings replacement
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
*I need your standard bearings
- Aluminium Prop Shaft
Original Pricing: 500 Yen (SGD $8.75 )
Selling At: $4.00
- Steering Link
Original Pricing: 2200 Yen (SGD $38.50 )
Selling At: Sold!
- Steering Set
Original Pricing: 2800 Yen (SGD $49.00 )
Selling At: Sold!
- Front Stabilizers
Original Pricing: 1400 Yen (SGD $24.50 )
Selling At: $13.00
- Rear Stabilizers
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
- Carbon Upper Deck
Original Pricing: 1200 Yen (SGD $21.00 )
Selling At: Sold!
- CVA Shocks
Original Pricing: 1800 Yen (SGD $31.50 )
Selling At: $16.00
*I need 1 of your stock shocks
- Springs set
Original Pricing: 1000 Yen (SGD $17.50)
Selling At: $9.00
- Front upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Sold!
- Front tie buckle set
Original Pricing: 450 Yen (SGD $7.80 )
Selling At: Sold!
- Rear upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Sold!
- 24T/25T Pinion
Original Pricing: 400 Yen (SGD $7.00)
Selling At: Sold!
55T/58T Spur gear sets
Original Pricing: 600 Yen (SGD $10.50 )
Selling At: Sold!
- TLU-01 Lights Assy
Original Pricing: 3400 Yen (SGD $59.50 )
Selling At: Given away and in turn, knew someone great
Should you be interested in any of the abv, contact me @ 93878033 to get yours today!! Self collect @ Simei MRT Station
[/quote]
Stock Servo - $15.00
TT01 Rolling Chassis - $100.00
- CVA Shocks
Original Pricing: 1800 Yen (SGD $31.50 )
Selling At: $16.00
*I need 1 of your stock shocks
- Springs set
Original Pricing: 1000 Yen (SGD $17.50)
Selling At: $9.00
- Front Stabilizers
Original Pricing: 1400 Yen (SGD $24.50 )
Selling At: $13.00
- Rear Stabilizers
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
- Full ball bearings replacement
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
*I need your standard bearings
- Aluminium Prop Shaft
Original Pricing: 500 Yen (SGD $8.75 )
Selling At: $4.00
- Front 1 way ball differential
Original Pricing: 3800 Yen (SGD $66.50 )
Selling At: $35.00
*I need your stock TT01 Front Plastic Diff
[quote author=nightstar board=Trading thread=1111028498 post=1156989874]Due to the huge amount of SMS received, I had already lost track on who's who and who reserved what.. As such, I will not allow reservations (With exception to the 2 guys I will be meeting @ Bouna Vista) and items are sold at First-Come-First-Serve-Basis.
Please call/sms 93878033 to confirm the item's availability.
I regret the inconvenience caused.
Thanks
************************************************** **
Your 1/2 price store!!
*Tamiya is a vendor that displays their pricing for their items in "Yen" on the item so there
is no way I can lie on the pricing below. Should you be in doubt, please print out the pricelist
and reference can be taken from StarGek.
All hopups are used less than 2 weeks.
TT01 ran less than 10 times.
TEU-101BK + Tamiya Expec + Receiver + 1500mah Nicad (Sold!)
Stock Servo - $15.00
TT01 Rolling Chassis - $100.00
- Front 1 way ball differential
Original Pricing: 3800 Yen (SGD $66.50 )
Selling At: $35.00
*I need your stock TT01 Front Plastic Diff
- Rear ball differential
Original Pricing: 2600 Yen (SGD $45.50 )
Selling At: Sold!
- Full ball bearings replacement
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
*I need your standard bearings
- Aluminium Prop Shaft
Original Pricing: 500 Yen (SGD $8.75 )
Selling At: $4.00
- Steering Link
Original Pricing: 2200 Yen (SGD $38.50 )
Selling At: Sold!
- Steering Set
Original Pricing: 2800 Yen (SGD $49.00 )
Selling At: Sold!
- Front Stabilizers
Original Pricing: 1400 Yen (SGD $24.50 )
Selling At: $13.00
- Rear Stabilizers
Original Pricing: 1500 Yen (SGD $26.25 )
Selling At: $14.00
- Carbon Upper Deck
Original Pricing: 1200 Yen (SGD $21.00 )
Selling At: Sold!
- CVA Shocks
Original Pricing: 1800 Yen (SGD $31.50 )
Selling At: $16.00
*I need 1 of your stock shocks
- Springs set
Original Pricing: 1000 Yen (SGD $17.50)
Selling At: $9.00
- Front upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Sold!
- Front tie buckle set
Original Pricing: 450 Yen (SGD $7.80 )
Selling At: Sold!
- Rear upper arm camber adjustment kit
Original Pricing: 900 Yen (SGD $15.75 )
Selling At: Sold!
- 24T/25T Pinion
Original Pricing: 400 Yen (SGD $7.00)
Selling At: Sold!
55T/58T Spur gear sets
Original Pricing: 600 Yen (SGD $10.50 )
Selling At: Sold!
- TLU-01 Lights Assy
Original Pricing: 3400 Yen (SGD $59.50 )
Selling At: Given away and in turn, knew someone great
Should you be interested in any of the abv, contact me @ 93878033 to get yours today!! Self collect @ Simei MRT Station
[/quote]
09-01-2006, 08:02 AM
Originally Posted by dirtdynamics
Ok, here we go....
Ups for sale is a complete almost ready to run race package for Ep buggies.
All you need is your own transmitter and receiver and batts!
Hese is what the package includes:
1) Complete RC10B4 FT ( main race buggy)Upgraded PRM ball cups
Front Brown Springs
Rear Green Springs
Front Losi axle mod (this allows easy change of front wheels without having to swap out bearings, very TRICK!)
Electronics installed
Scuhlze 58CE esc
Lehner 4200 motor
Euro connectors
Sanwa VR servo
Overall great shape and setup for racing.
2) Almost complete RC10B4 FT
It only needs a right axle to make it 100% complete
Brown front springs
Black Rear springs
Good shape, in fact good to make it run too but i'm keeping this for spares for the main race buggy.
3) Wheels/ tyres.
Toegether with what is on the bugyg right now i have:
6x Rear complete wheels in various styles
6x Front complete wheels in various styles
5x New Front rims in mixed styles
2x New Rear rims in mixed styles
**The fronts are all losi rims to suit my losi mod.
4) Running gear & spares
a) Pinions, oh how do i tell you what i have.....
RRp pinions sizes
15,16,17,18,19,20,21,22,23,24,25,26
All the above have been placed neatly in 2 black RPM pinions holder case!
Only one has been used in the buugy the rest are still virgin....
27,28,29,30,31,32
These are still NIP
** i think you can mess with gearing unti you give up one....LOL
b) Spur Gears
Spur sizes 81,84,87
All NIP
c) RPM goodies
Gear Cover & front bumper both in blue NIP (HTF)
d) Spares
2x sets of Front arms (complete, left and right)
1x set of Rear Arms (complete, left and right)
1x Front tower
1x battery brace (both buggies have one so this is a 3rd piece)
1x Slipper PAd NIP
1x rear Arm mount,Anti squat shim set (No.9571) NIP
1x front bulkhead (9563) NIP
1x Inner hinge pin set (2242) NIP
1x Front green springs (pair)
1x Front Black springs (pair)
1x Gold Front Spings (pair)
1x black Rear Springs (pair)
1x Silver Rear Springs (pair)
5) Shells / wings
I have 3 painted shells and 2 used wings
Also included is a NIP Jconcepts high downforce wings for the B4
Check the pics.
I am selling my whole setup cos i no longer want to play buggies.
I got other commitments to attend to right now.
This is enough to get you up and racing if you want to or play aound with all the spares i've got.
Asking$888.00
96974519
I can arrange for installments of two maybe 3 payments....
sms me, let talk
Self collection at my place in Sembawang cos too much stuff unless you really want i will deliver at a small charge. lol
Thanks and good day to all.....
Ups for sale is a complete almost ready to run race package for Ep buggies.
All you need is your own transmitter and receiver and batts!
Hese is what the package includes:
1) Complete RC10B4 FT ( main race buggy)Upgraded PRM ball cups
Front Brown Springs
Rear Green Springs
Front Losi axle mod (this allows easy change of front wheels without having to swap out bearings, very TRICK!)
Electronics installed
Scuhlze 58CE esc
Lehner 4200 motor
Euro connectors
Sanwa VR servo
Overall great shape and setup for racing.
2) Almost complete RC10B4 FT
It only needs a right axle to make it 100% complete
Brown front springs
Black Rear springs
Good shape, in fact good to make it run too but i'm keeping this for spares for the main race buggy.
3) Wheels/ tyres.
Toegether with what is on the bugyg right now i have:
6x Rear complete wheels in various styles
6x Front complete wheels in various styles
5x New Front rims in mixed styles
2x New Rear rims in mixed styles
**The fronts are all losi rims to suit my losi mod.
4) Running gear & spares
a) Pinions, oh how do i tell you what i have.....
RRp pinions sizes
15,16,17,18,19,20,21,22,23,24,25,26
All the above have been placed neatly in 2 black RPM pinions holder case!
Only one has been used in the buugy the rest are still virgin....
27,28,29,30,31,32
These are still NIP
** i think you can mess with gearing unti you give up one....LOL
b) Spur Gears
Spur sizes 81,84,87
All NIP
c) RPM goodies
Gear Cover & front bumper both in blue NIP (HTF)
d) Spares
2x sets of Front arms (complete, left and right)
1x set of Rear Arms (complete, left and right)
1x Front tower
1x battery brace (both buggies have one so this is a 3rd piece)
1x Slipper PAd NIP
1x rear Arm mount,Anti squat shim set (No.9571) NIP
1x front bulkhead (9563) NIP
1x Inner hinge pin set (2242) NIP
1x Front green springs (pair)
1x Front Black springs (pair)
1x Gold Front Spings (pair)
1x black Rear Springs (pair)
1x Silver Rear Springs (pair)
5) Shells / wings
I have 3 painted shells and 2 used wings
Also included is a NIP Jconcepts high downforce wings for the B4
Check the pics.
I am selling my whole setup cos i no longer want to play buggies.
I got other commitments to attend to right now.
This is enough to get you up and racing if you want to or play aound with all the spares i've got.
Asking$888.00
96974519
I can arrange for installments of two maybe 3 payments....
sms me, let talk
Self collection at my place in Sembawang cos too much stuff unless you really want i will deliver at a small charge. lol
Thanks and good day to all.....
09-01-2006, 11:35 AM
Tech Initiate
Batteries Sold!
2 pcs GP3300s(side by side)---S$50 for both. Comes with free box for holding the batteries. (SOLD!)
Thanks for all enquiries!
[/QUOTE]
Thanks for all enquiries!
[/QUOTE]
09-01-2006, 05:48 PM
PRO CHARGER EX15 and TT01
TT01 $75 COVER AND CHASSIS ONLY
CHARGER $200 condition 9/10
interested party pls email me at [email protected] for viewing thanks
CHARGER $200 condition 9/10
interested party pls email me at [email protected] for viewing thanks
Last edited by evo; 09-02-2006 at 02:55 AM.
09-01-2006, 09:14 PM
Tech Addict
iTrader: (5)
Have lost interest in fixing up the following
Stuff to sell:
1. Tamiya TLT-1 rockbuster
- new in box
- include Tamiya 1700mah TLT-1 pack
- $250 self collect
2. Tamiya Dark Impact
- new in box
- $200 self collect
3. Traxxas Stampede
- rarely run, some scratches on cover
- RTR with tx, rx, servo, stock traxxas ESC and hotbodies 2000mah NiCd battery
- $150 self collect
Happy to swap for brushless motor system with topup either side as necessary.
PM if interested. Thanks!
Stuff to sell:
1. Tamiya TLT-1 rockbuster
- new in box
- include Tamiya 1700mah TLT-1 pack
- $250 self collect
2. Tamiya Dark Impact
- new in box
- $200 self collect
3. Traxxas Stampede
- rarely run, some scratches on cover
- RTR with tx, rx, servo, stock traxxas ESC and hotbodies 2000mah NiCd battery
- $150 self collect
Happy to swap for brushless motor system with topup either side as necessary.
PM if interested. Thanks!