3LikesFull Throttle Break-In NOVAROSSI Engine Room (Video)
08-22-2018, 03:28 PM
#1
Full Throttle Break-In NOVAROSSI Engine Room (Video)
Interesting video.
08-22-2018, 03:47 PM
#2
No thanks. Not for me.
08-22-2018, 10:06 PM
#3
I started doing the "Full Throttle" break-in when Neal offered the prop and adapter to do it. I've broken in all of my engines this way ever since and all have run flawlessly. Just do a little warm-up and open her up full throttle and control the heat with the high speed needle. I try to stay around 220* (Richen it up a little if if the temp starts to climb or lean it out to get the heat up).
08-22-2018, 10:45 PM
#4
I started doing the "Full Throttle" break-in when Neal offered the prop and adapter to do it. I've broken in all of my engines this way ever since and all have run flawlessly. Just do a little warm-up and open her up full throttle and control the heat with the high speed needle. I try to stay around 220* (Richen it up a little if if the temp starts to climb or lean it out to get the heat up).
08-22-2018, 10:50 PM
#5
Tech Regular
08-23-2018, 03:34 AM
#6
08-23-2018, 04:27 AM
#7
Just under the 40.000 rpm, sounds like a pylon racer:
Well, it is not my way of a break-in but I can imagine because of pylon racers it should be no deal. I would expect a fuel with lots of oil is used, pylon racers just use a mix of 20% oil and 80% methanol.
Well, it is not my way of a break-in but I can imagine because of pylon racers it should be no deal. I would expect a fuel with lots of oil is used, pylon racers just use a mix of 20% oil and 80% methanol.
08-23-2018, 03:00 PM
#8
Tech Regular
Hello to all, I have a doubt which is the exhaust and Novarossi manifold the best for Fuel-Economy? or specific to Fuel Economy?
Thank you
Thank you
08-23-2018, 03:21 PM
#9
Tech Fanatic
The guys running tether cars is also pretty hardcore, just in another league then common RC folks. Picco was very involved in that type of cars.
08-24-2018, 08:11 AM
#10
Tech Master
I think thoose engine are great With a long lifspan. I friend of mine were Nova factory driver for a year. his engines were so freaking awsome, ran ALOT better than anything i have ever had, inbcluding some very well reputable modyfiers/tuners out there...
08-24-2018, 03:35 PM
#12
Tech Fanatic
And people worry so much about how to break in a Nitro engine lol!!! Looks like you just start it, get it to operating temp, let er rip!!!!!
