Pyramid

Pictures say more

http://www.mytsn.com/products/desc.asp?prid=3398

Ridder

Thanks Pyramid!

I also tried to find info on MyTSN, but I always find it hard to find what you are looking for on MyTSN.

rccobra705

iTrader: (1)

Ya, there is missing some search facilities at myTSN.

Regards

Pyramid

To find things (products) on mytsn, the fastest way is to know its parts number. Go to product page and just type it in.

M7H

If you don't know what you are looking for, how can you know the partnumber then?.....
And if you do know the partnumber, you are probably not looking for that part anymore......

Pyramid

That`s a very good and tricky question

I guess they expect you to have the reffence manual (prodived in the car kit) all the time. Anyhow, on every of Serpent car kit main pages, there are a lot of things available for downloads, not only manual and refference guide, but also setups information as well as other thing such as brother Mark summary .

lobotm

I'm using the partslist at least its working with the 710, so you look up the car you have then partslist then choose the part of the car you want.

It works for me

http://www.mytsn.com/products/parts.asp?prid=3293

Ridder

Someone offered me a 5 months old Mega ZX12 with some spareparts (conrod, shims, glowplugs, o-rings) for a reasonable price.

One gallon went through it and it still has the 1st conrod....probably the improved type.

I did a ZX12 search, but got a lot of horror stories about this engine...also on the myTSN forum...

Very hard to tune, doesn't hold tune, eats conrods (that was in the past I guess ?)

Anybody here has a ZX12 and would like to share some wisdom??

The OS 12TZ also looks like a very nice engine...less top end than the ZX12.

I will probably get a Skyline VR12 pipe for the Mega (if I buy it) or a Mielke pipe (they are lookalikes).

Should I get it???

Ridder

I tried to find some info on a Mega tuned pipe (Mega Pipe Inline Polished ZX-12 203004 ) ..........
Can't find it.....not with "tuned pipe" or with part number...
Only the exhaust manifold...

GoldFinger

How reasonable is the price ?

Speed_Racer

My header is rubbing on my side belt. I got a Skyline VR12. What header do you guys use? Does anyone have a pipe and header that will work for sale? PM me.

Thanks

Arno

iTrader: (4)

If you use a conical header it will not rub I had the same problem. You have to get a header with less of a curve.

Speed_Racer

Thanks Arno. Where do you guys race at?

Which pipe would you guys recommend?

Arno

iTrader: (4)

We usually go to Revelation or Crystal Park. We will probably be at crysatl park on Friday. I was using a pipe made by Top but I cant remember the number.

Speed_Racer

Thanks again Arno. What time you going to be there at?

You guys never go to SV speedway?