New X10P4 Touring Car From MLP
#721
Well I made a lot of the silver bulk heads but everyone wanted them with belt tensioner bearing holders and I did not have time to make new ones we also used the HPI Suspension. But then we tested the Tamiya MSX off of my Refine2 and I felt it had more adjustment so we went with that and the motor mount has changed as well.
As for the change in suspension geometry there is none form our testing cars.
The motor and everything is still in the same place.
The Yokomo Suspension car is a Special Order for one of our Team Factory drivers. we also have a car out there running the Cyclone Suspension.
To make a oh so long story short we had some bad luck this year and it is not cheap getting parts made like arms diffs c hubs steering knuckles and so on.
So we did the next best thing Like our F201SCFPRO II F1 car we went with what I felt would be best. Tamiya parts. everyone stocks them!
As for the change in suspension geometry there is none form our testing cars.
The motor and everything is still in the same place.
The Yokomo Suspension car is a Special Order for one of our Team Factory drivers. we also have a car out there running the Cyclone Suspension.
To make a oh so long story short we had some bad luck this year and it is not cheap getting parts made like arms diffs c hubs steering knuckles and so on.
So we did the next best thing Like our F201SCFPRO II F1 car we went with what I felt would be best. Tamiya parts. everyone stocks them!
Last edited by Marty Peterson; 08-03-2008 at 12:41 PM.
#725
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
darn...
that looks trick Marty...I'm starting to count MLP cars in my sleep...LOL...
Fred are you making a debut at Horsham with the new wheels? or elsewhere
Fred are you making a debut at Horsham with the new wheels? or elsewhere
#727
Originally Posted by olhipster1
that looks trick Marty...I'm starting to count MLP cars in my sleep...LOL...
Fred are you making a debut at Horsham with the new wheels? or elsewhere
Fred are you making a debut at Horsham with the new wheels? or elsewhere
Thanks we will keep working on it to get it out to you as fast as I can !
Last edited by Marty Peterson; 08-03-2008 at 12:41 PM.
#728
Tech Elite
iTrader: (102)
Join Date: Dec 2004
Location: Far away from Covid19 but close to 20
Posts: 4,129
Trader Rating: 102 (100%+)
thanks
Marty..
I just realized....I could use the slots in the left side as a vent/cool area for my speedo, I'm mainly using a GTB speedo it will work perfectly and the tape slot will allow me to tape down that massive capacitor the GTB uses.....ohh..yeah..
I just realized....I could use the slots in the left side as a vent/cool area for my speedo, I'm mainly using a GTB speedo it will work perfectly and the tape slot will allow me to tape down that massive capacitor the GTB uses.....ohh..yeah..
#730
Tech Elite
iTrader: (3)
Originally Posted by Marty Peterson
Ok it is going to be Orange and Standard Carbon fiber right now I just ordered everything to make it happen. I can not wait to get this done!
Well I like the green as well but we will do the Orange!
Well I like the green as well but we will do the Orange!
#732
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by Marty Peterson
Well then we will do them in Orange that will stand out! anyway Oly I will have more pics of your car tonight ok.
I can not wait for Fred to run his and give us the lowdown on a good carpet run.
I can not wait for Fred to run his and give us the lowdown on a good carpet run.
#734
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Originally Posted by Marty Peterson
Smooth indoor asphalt then he has the wrong chassis setup for that but I bet it works good as well
Color wise I'm with you on the green as it is killer. Only saw one car done in this color and it was a Corally Assassin that someone posted on Tech last year in green and it was killer looking.