LRP Sphere Comp setting
#1
LRP Sphere Comp setting
Any recommendations for settings with 10.5 in a B4 for loose/medium traction?
#3
depends a lot on the type of motor you are using...
#5
i run 2-3-1-1 with a 7.5 and 8.5 on medium/loose tracks with my rb5.
prolly a good place to start with a 10.5.
prolly a good place to start with a 10.5.
#6
#7
Tech Champion
iTrader: (33)
LOL....
There is not a right or a wrong really.... Some racers prefer drag brake some don't.... Some like it punchy some don't.
I believe gearing is more of a factor between different manufacturers then a spheres profiles.
There is not a right or a wrong really.... Some racers prefer drag brake some don't.... Some like it punchy some don't.
I believe gearing is more of a factor between different manufacturers then a spheres profiles.
Last edited by Jason Pelletier; 04-24-2008 at 02:07 PM.
#8
A bonded rotor or sinter will decide a lot on drag brake and other settings for the ESC....
#9
So what gearing would you recommend with the B4. Starting with 22/81(stock spur) sound about right?