Exterminator

Great Job Tosolini and Peter in Cleveland. To bad the luck was not going your way.

Bob Barry

iTrader: (22)

Just wanted to stop in and say hello, and glad to be part of the team. Eddie I will put my order through tomorrow, gotta wait for pay day. Ill email you and let you know.

Bob Barry

iTrader: (22)

Just wanted to stop in and say hello, and glad to be part of the team. Eddie I will put my order through tomorrow, gotta wait for pay day. Ill email you and let you know.

Randy Caster

iTrader: (47)

TTT

I picked up my arm from Jon today, and it looks like it'll rip up the track, thanks Eddie.

Jon Kerr

iTrader: (17)

That was a nice tight looking arm. That motor should be ballistic, especially at SoCal and their 4 minute Pro Mod class.

Randy Caster

iTrader: (47)

That's exactly what I was thinking. But you also gotta think about that huge straight Tamiya has

EddieO

iTrader: (6)

Well, if you can't peel it down the straight with a 6 turn.....we need to talk.

Later EddieO

Randy Caster

iTrader: (47)

Thats the trick to driving a 6 turn though, your throttle finger has to be trained not to spin the tires all over the track

kerry

iTrader: (1)

hey eddieo what is a brush channeling jig that you sell?

EddieO

iTrader: (6)

No such device is available.........yet....

Later EddieO

sonicboom141

whens the site going to be up
*sorry if asked before*

ATLAS COPCO

Hi Eddie
Just a quick note to let you know that MR JOLLY is off line at the moment and he should be back on by next week or so
he has asked me to ask you for a quote on 25 green 25 blue putnam brushes and 25,pairs 767 vertical cut if possiable, You can send me a pm with the quote
Buy the way i am the s bit in cs racing
All the best Simon
PS now the gearing issue has been sourted out the motors are well quick we may have to get some more in the near future

EddieO

iTrader: (6)

Sweet....email me direct, I can't really post the prices for dealers online.

[email protected]

You should order some more.....I actually HAVE ROAR Epics and 4499's in stock!

Later EddieO

Randy Caster

iTrader: (47)

I believe Shane is still working on getting the site completed..

Nick111

Eddie, i talked to the guys at my track about a 19t 18.5awg motor, no go, it has to be a spec motor, so is there anyway you can wind me up a reedy kr spec? proly wont need it until february but i might as well ask now