GT8 Class--buggy-based on road electric!
#678
http://www.ofna.com/images/parts-images/10000/10994.jpg
#679
I use loctite and have yet to loose a wheel. Now watch, I've gone and jinxed myself for saying that.
#680
Ofna has these serrated 17mm nuts it will not come off.
http://www.ofna.com/images/parts-images/10000/10994.jpg
http://www.ofna.com/images/parts-images/10000/10994.jpg
#681
Tech Adept
We have serrated one available. Part# 10994
#684
I've got my center diff with 120k wt and I'm geared at 48/16. I agree with that 2-spd being a pain. What shock oil are you running? I've got it at stock. I believe 80wt.F&R but I did put the white springs on the front (medium). A little better than when I had the red (soft) up front. Then again, I'm just experimenting. Trial and error.
#685
Tech Regular
iTrader: (1)
My suspension is all stock at the moment. I have not had enough time to actually race this car to find out what I want to change on the suspension.
Yesterday was the first time it saw a full day of racing.
I'm planning on going to upright mounted shocks in the front, then I will mess with oils, springs, etc.
SNR is the guy to talk to about suspension on these cars.
Yesterday was the first time it saw a full day of racing.
I'm planning on going to upright mounted shocks in the front, then I will mess with oils, springs, etc.
SNR is the guy to talk to about suspension on these cars.
#687
#688
Tech Champion
iTrader: (94)
Originally Posted by TYLORD
That would be great to maybe put together a group buy for the PMT tires (unmounted). Any ideas?
Although I did email them a while ago, telling them that we collectively find the rims f'ugly..
I'm sure they will respond with a "vaffanculo"
#690
So the ofna uses 2.5x17 mm drive pins vs the 3x17mm that losi and AE use.
Oh, hey whose A/B/C/D aluminum plates should we get for the DM-1. Want to be prepared for if I smack the light post.
Last edited by markw; 10-18-2010 at 09:33 PM.