Team Corally RDX Touring Car
09-13-2004, 04:26 PM
#166
working late?
that was actually pretty funny.
but really, will it run true? does the rightside bearing afix to the plastic pulley or the bolt on unit?
wow, if this keeps up, corally will have a decent length thread on their hands.
Yes, it is only wide enough for one belt, you have to cut the belts in half to fit them both on there.
but really, will it run true? does the rightside bearing afix to the plastic pulley or the bolt on unit?
wow, if this keeps up, corally will have a decent length thread on their hands.
09-14-2004, 08:04 AM
#167
All work and no play makes Jack a dull boy.... we are always here till 7pm.
There are 2 bearings that support the pulleys and spur gear. The second pulley has flanges on both sides which keeps the belts aligned.
There are 2 bearings that support the pulleys and spur gear. The second pulley has flanges on both sides which keeps the belts aligned.
09-15-2004, 07:17 AM
#168
.
Last edited by CorallyUSA; 09-15-2004 at 01:33 PM.
09-15-2004, 01:34 PM
#169
Added a couple more dealers, one in Ohio and the other in Canada.
09-15-2004, 02:23 PM
#170
any chance of a future molded spur/pulley combo that will be one peice that will fit both belts? that would be sweet. c'mon now, we need that drivetrain to be ultralight regardless of the application.... asphalt, carpet, stock, mod. right?
- chris
- chris
09-16-2004, 09:14 AM
#171
The pulley was originally designed for the Assassin car, which had one belt going to the rear, then one big belt from front to rear. Not likely a double geared pulley will be molded and produced.
09-16-2004, 09:56 AM
#172
Added a press release of a new driver in 12th scale.
09-16-2004, 10:08 AM
#174
yup. pretty cool. i see they don't have my pic up there yet. huh.
ray, cancel my preorder for the car and all the spares. if they won't make a molded pulley/spur, then i'm out. 
Not likely a double geared pulley will be molded and produced.
09-16-2004, 10:13 AM
#175
Ray.... Simo, Sakke and Chris should be in Cleveland racing Touring and 12th Scale. Not sure what Surikarn's plans will be since Tamiya kinda sets his schedule.
Seaball.... perhaps if you funded the new molds it would help.
Seaball.... perhaps if you funded the new molds it would help.
09-16-2004, 10:29 AM
#176
WOW!!!!!!!!!!!!!!!
Now that's what I call a scoop.
I can't believe Constant financed that.
Good luck boys.
Now that's what I call a scoop.
I can't believe Constant financed that.
Good luck boys.
09-19-2004, 07:05 AM
#177
Hi Corally Dudes,
Do we have a projected date when the kits will arrive?
Thanks,
James
Do we have a projected date when the kits will arrive?
Thanks,
James
09-19-2004, 07:53 AM
#178
Registered User
in about a week
09-20-2004, 09:45 AM
#179
We are hoping for an early arrival. But we are currently still looking at the end of this month. Everything remains on schedule.
09-21-2004, 12:13 PM
#180
Race 8 of the Florida State Series was held at Speedline this past weekend. Chris Tosolini took the TQ for Pro Modified and backed up with a wire to wire WIN in the A main. Congratulations Chris!