BMI Racing "Copperhead 12" discussion and support
#842
how about the DB10RR? Is it updateble to the copperhead?
edit:
never mind checked the website and yes there is a conversion set.
edit:
never mind checked the website and yes there is a conversion set.
#843
Tech Champion
iTrader: (31)
Hello, i have a DB12RR chassis, but here the 1/12 class is not very popular, and i have the car only for display ...
The car is awesome in outdoor, i win National with it, 2 years a go, modified class with NiMh.
I like to know, if there a lot of differences into my car and new Copperhead, is possible update to Copperhead 12, or is best buy a new car, ... etc.
Thanks in Advance, Luis C.
The car is awesome in outdoor, i win National with it, 2 years a go, modified class with NiMh.
I like to know, if there a lot of differences into my car and new Copperhead, is possible update to Copperhead 12, or is best buy a new car, ... etc.
Thanks in Advance, Luis C.
#844
Tech Adept
Thanks for fast response, Luis C.
Thanks Jaybee, i read later, your response.
#848
Hey jason you have a pm
#850
Tech Elite
iTrader: (51)
Join Date: Feb 2002
Location: Comin at ya from a distant galaxy
Posts: 2,930
Trader Rating: 51 (100%+)
Hey Jaybee,
I'll try to answer your question the best i can about the Speed8HD from what I remember with that body it had lots of downforce.
I have'nt tried it with 1s lipo 1/12th yet, The last time i ran that body is when the 4600 nimh where popular.
I like the AMR because its very stable the Speed8 HD was nice to but it didnt seem to rotate as wheel as the AMR.
I still think it might work because I will be stable as well I dont hurt to try it.
Hope this helps
I'll try to answer your question the best i can about the Speed8HD from what I remember with that body it had lots of downforce.
I have'nt tried it with 1s lipo 1/12th yet, The last time i ran that body is when the 4600 nimh where popular.
I like the AMR because its very stable the Speed8 HD was nice to but it didnt seem to rotate as wheel as the AMR.
I still think it might work because I will be stable as well I dont hurt to try it.
Hope this helps
#851
Tech Champion
iTrader: (31)
Hey Jaybee,
I'll try to answer your question the best i can about the Speed8HD from what I remember with that body it had lots of downforce.
I have'nt tried it with 1s lipo 1/12th yet, The last time i ran that body is when the 4600 nimh where popular.
I like the AMR because its very stable the Speed8 HD was nice to but it didnt seem to rotate as wheel as the AMR.
I still think it might work because I will be stable as well I dont hurt to try it.
Hope this helps
I'll try to answer your question the best i can about the Speed8HD from what I remember with that body it had lots of downforce.
I have'nt tried it with 1s lipo 1/12th yet, The last time i ran that body is when the 4600 nimh where popular.
I like the AMR because its very stable the Speed8 HD was nice to but it didnt seem to rotate as wheel as the AMR.
I still think it might work because I will be stable as well I dont hurt to try it.
Hope this helps
Thanks again brah
#852
Tech Champion
I like how much room the Speed 8 HD has under the body in the back. Seems like the Speed 12s all sat too low and I feel didn't handle as well because they affected the pod's movement. I'd like to give the AMR a try though. I'd really like to try the Audi or Black Art but I find they are too thin for my liking. Really like the style though.
#853
I have found if I switch from a Speed 8 HD to an AMR the car has more front and less rear grip. When the bite is up on our track (which isn't nearly often enough) The AMR is substantially faster. When the bite is low I much prefer the Speed 8 HD. The AMR is also a snugger fit over the chassis.
Lonny
Lonny
#855
That will be negative camber (top of the wheel leans inwards). Positive camber is never used for all I know...