Team Losi JRXS
#7066
R/C Tech Elite Member
iTrader: (47)
Originally Posted by Gearhead3
here is a wealth of setup sheets.
http://www.jrxs.net/forums/index.php?showforum=8
Also Here is some entertainment for you everyone.
http://www.jrxs.net/forums/index.php?showtopic=349
http://www.jrxs.net/forums/index.php?showforum=8
Also Here is some entertainment for you everyone.
http://www.jrxs.net/forums/index.php?showtopic=349
#7068
Tech Initiate
Set-Ups
JRXS Bill
You helped me out a while back with an asphalt set-up for an old fart> one that wasn't twitchy and was easy to drive.
The set-up you gave me was w/o pooky shochk brackets, no spacers under front pivot block, 1* rear pivots and swaybars font/rear.
I just got to try this out saturday night and it was pretty good except for some initial rear kick-out before they sauced the track surface, than it was fine.
I was wondering if you have any up-dates to that set-up, ie Pooky Brackets
Front Diff, shock pistons etc. or just a new set-up that you feel may be a bit more consistent.
I'm not complaining by no means, just looking for improvement.
Thanks
You helped me out a while back with an asphalt set-up for an old fart> one that wasn't twitchy and was easy to drive.
The set-up you gave me was w/o pooky shochk brackets, no spacers under front pivot block, 1* rear pivots and swaybars font/rear.
I just got to try this out saturday night and it was pretty good except for some initial rear kick-out before they sauced the track surface, than it was fine.
I was wondering if you have any up-dates to that set-up, ie Pooky Brackets
Front Diff, shock pistons etc. or just a new set-up that you feel may be a bit more consistent.
I'm not complaining by no means, just looking for improvement.
Thanks
#7069
Originally Posted by J Tronzano
JRXS Bill
You helped me out a while back with an asphalt set-up for an old fart> one that wasn't twitchy and was easy to drive.
The set-up you gave me was w/o pooky shochk brackets, no spacers under front pivot block, 1* rear pivots and swaybars font/rear.
I just got to try this out saturday night and it was pretty good except for some initial rear kick-out before they sauced the track surface, than it was fine.
I was wondering if you have any up-dates to that set-up, ie Pooky Brackets
Front Diff, shock pistons etc. or just a new set-up that you feel may be a bit more consistent.
I'm not complaining by no means, just looking for improvement.
Thanks
You helped me out a while back with an asphalt set-up for an old fart> one that wasn't twitchy and was easy to drive.
The set-up you gave me was w/o pooky shochk brackets, no spacers under front pivot block, 1* rear pivots and swaybars font/rear.
I just got to try this out saturday night and it was pretty good except for some initial rear kick-out before they sauced the track surface, than it was fine.
I was wondering if you have any up-dates to that set-up, ie Pooky Brackets
Front Diff, shock pistons etc. or just a new set-up that you feel may be a bit more consistent.
I'm not complaining by no means, just looking for improvement.
Thanks
FYI...The above description doesn't sound like anything I remember giving out. I went from the kit setup to Todd Hodge's and then to Josh's (very similar to Todd's). All have been for rubber on asphalt.
Got to use it on my first bumpy track this past weekend. I could go through bumpy spots that were throwing other cars completely off the track. Great fun!
Bill
#7070
Tech Elite
iTrader: (6)
Originally Posted by JRX-S Bill
No problem...Copy the posted Josh Numan asphalt rubber setup with the BK (or PookyT) shock brackets. That is where I am at. Josh used it to win Open Mod at the Reedy; but, I use it for both Stock & 19T. Very versatile because most changes only involve tire/insert/wheel selections.
FYI...The above description doesn't sound like anything I remember giving out. I went from the kit setup to Todd Hodge's and then to Josh's (very similar to Todd's). All have been for rubber on asphalt.
Got to use it on my first bumpy track this past weekend. I could go through bumpy spots that were throwing other cars completely off the track. Great fun!
Bill
FYI...The above description doesn't sound like anything I remember giving out. I went from the kit setup to Todd Hodge's and then to Josh's (very similar to Todd's). All have been for rubber on asphalt.
Got to use it on my first bumpy track this past weekend. I could go through bumpy spots that were throwing other cars completely off the track. Great fun!
Bill
#7071
Originally Posted by Roberto Falcon
So the spool for this car is just a locked diff?
Which one does this car handle better diff or spool?
Which one does this car handle better diff or spool?
Brant
#7073
Tech Addict
2 days after they were requested, Great service, you might want to drop him another e-mail
Originally Posted by Darkseid
How long did it take you guys to get your replacement rear hubs?
I requested mine from Losi about a month ago and still haven't gotten them.
I even got confirmation back from T. Hodge by email saying they would be sent.
I requested mine from Losi about a month ago and still haven't gotten them.
I even got confirmation back from T. Hodge by email saying they would be sent.
#7074
Tech Champion
iTrader: (32)
Join Date: Aug 2001
Location: In a land of mini-mighty mental giants
Posts: 8,854
Trader Rating: 32 (100%+)
Originally Posted by Darkseid
How long did it take you guys to get your replacement rear hubs?
I requested mine from Losi about a month ago and still haven't gotten them.
I even got confirmation back from T. Hodge by email saying they would be sent.
I requested mine from Losi about a month ago and still haven't gotten them.
I even got confirmation back from T. Hodge by email saying they would be sent.
#7075
Originally Posted by Darkseid
How long did it take you guys to get your replacement rear hubs?
I requested mine from Losi about a month ago and still haven't gotten them.
I even got confirmation back from T. Hodge by email saying they would be sent.
I requested mine from Losi about a month ago and still haven't gotten them.
I even got confirmation back from T. Hodge by email saying they would be sent.
Oops this may been a oversight on my end. I am sorry. Please call Team Losi and talk to Bill Goldsmith. He will get your squared away. I am off to Italy tomorrow so I can not do anything right now.
#7076
Darkseid,
Does a dark cloud just follow you around??? You could startup another "Is it here yet?" string.
I just used a set of zero degree hubs from my XXX-S spares box. Todd saw me a few days later and handed a set to me with the little TL logo above the "0".. They are still in my box because I haven't broken any JRX_S parts yet.
Todd is faster than FedEx and more reliable than George Bush.
Good luck!
Ciao Todd...
Does a dark cloud just follow you around??? You could startup another "Is it here yet?" string.
I just used a set of zero degree hubs from my XXX-S spares box. Todd saw me a few days later and handed a set to me with the little TL logo above the "0".. They are still in my box because I haven't broken any JRX_S parts yet.
Todd is faster than FedEx and more reliable than George Bush.
Good luck!
Ciao Todd...
#7078
Originally Posted by T. Hodge
Oops this may been a oversight on my end. I am sorry. Please call Team Losi and talk to Bill Goldsmith. He will get your squared away. I am off to Italy tomorrow so I can not do anything right now.
Brant
#7079
I'm pretty sure somebody posted a list of the sizes and quanitities of screws needed to put together an aluminum screw kit for this car... anybody remember what/where it is?
#7080
Originally Posted by SoCalLosiRacer
I'm pretty sure somebody posted a list of the sizes and quanitities of screws needed to put together an aluminum screw kit for this car... anybody remember what/where it is?
Brant