18Likes

Xray NT1

Reply Subscribe

Thread Tools

Search this Thread

12-01-2007, 02:40 PM

#2206

_cyclops_

Tech Regular

Join Date: Mar 2005

Location: Veenendaal, The Netherlands

Posts: 478

Trader Rating: 0

Quote:

Originally Posted by musti72

does serpent 720's front and rear ball diffs and shocks fit on nt1??

Diff's will defined NOT fit!

12-02-2007, 02:21 AM

#2207

advfuel

Tech Fanatic

iTrader: (29)

Join Date: Nov 2007

Posts: 933

Trader Rating: 29 (100%+)

Excessive rear tire wear

does any body have problems with excessive rear tire wear, if so which adjustments did you make. Tires,diff oils,roll center, springs.
Running on a car park stlye track with lots off hair pin turns. 40.000 oils F-R. GRP tires,Light purple springs F-R.
Regards Rowen

12-02-2007, 02:35 AM

#2208

mrgsr

Tech Elite

iTrader: (15)

Join Date: Aug 2004

Location: Pole Position

Posts: 3,312

Trader Rating: 15 (94%+)

wheel offset..

Hi guys
what offset wheels are required to run on these cars to keep thelegal track width under 200mm when using the stock settings in the manual?

thanks
JOhn

12-02-2007, 08:44 AM

#2209

YBSLOW

Tech Elite

iTrader: (9)

Join Date: May 2002

Location: ARIZONA

Posts: 2,575

Trader Rating: 9 (100%+)

YBslow Inc front-spool and 7075 Rear Outdrives

Coming soon from www.YBslowInc.com front-spool and 7075 Rear Outdrives
Sneak Preview

Attached Thumbnails

Xray NT1-xray-nt1-alum-outdrives-002rct.jpg

Xray NT1-xray-nt1-alum-outdrives-003rct.jpg

Xray NT1-xray-nt1-alum-outdrives-004rct.jpg

Xray NT1-xray-nt1-alum-outdrives-005rct.jpg

Last edited by YBSLOW; 12-23-2008 at 01:04 PM.

12-02-2007, 09:38 AM

#2210

asw7576

Tech Champion

Join Date: Sep 2004

Posts: 5,792

Trader Rating: 0

Quote:

Originally Posted by mrgsr

Hi guys
what offset wheels are required to run on these cars to keep thelegal track width under 200mm when using the stock settings in the manual?

thanks
JOhn

Offset 0 ( normal type )

12-02-2007, 10:46 AM

#2211

Sow&Steady

Tech Elite

Join Date: Dec 2003

Location: Va Va Voom!

Posts: 4,104

Trader Rating: 0

Quote:

Originally Posted by asw7576

Offset 0 ( normal type )

Hey ASW, that's not fair ... you have more sponsors than me! I only have Visa and Paypal as my sponsors!!!

12-02-2007, 12:11 PM

#2212

grub

Tech Master

Join Date: May 2007

Posts: 1,021

Trader Rating: 0

squeezer

rowen you have a pm

12-02-2007, 02:16 PM

#2213

D-nicest

Tech Fanatic

Join Date: Sep 2006

Location: NY, New York

Posts: 887

Trader Rating: 0

Quote:

Originally Posted by advfuel

Some of the things you can do to compensate for tire wear are just driving smoother, or by running a firmer shore. It's usually the surface that your running on that causes the tires to wear down faster than on other surfaces. Also if your tires are coning a lot lessen maybe .5-1 degree of chamber in the rear. It's usually not the car's fault that tires are wearing down so fast

12-02-2007, 06:40 PM

#2214

advfuel

Tech Fanatic

iTrader: (29)

Join Date: Nov 2007

Posts: 933

Trader Rating: 29 (100%+)

Eccentric adjustment

Can someone please advise how to adjust the lower eccentric on the lower suspesion arm. The manual gives a setting but I dont know when to adjust them or why. Is it for chassis tweak,

Any info would be great
Regards Rowen

Last edited by advfuel; 12-02-2007 at 10:25 PM.

12-02-2007, 08:25 PM

#2215

mrgsr

Tech Elite

iTrader: (15)

Join Date: Aug 2004

Location: Pole Position

Posts: 3,312

Trader Rating: 15 (94%+)

time to buy nt1

where is the cheapest advertised price at the moment for the 2008 spec nt1 ?

thanks
John

12-02-2007, 08:46 PM

#2216

goop

Tech Master

iTrader: (2)

Join Date: Mar 2003

Posts: 1,466

Trader Rating: 2 (100%+)

Quote:

Originally Posted by advfuel

Can someone please advise how to adjust the lower eccentric on the lower suspesion arm. The manual gives a setting but I dont know when to adjust themor why. Is it for chassis tweak,

Any info would be great
Regards Rowen

are you talking about the eccentric on the lower rear arm?

12-02-2007, 09:23 PM

#2217

advfuel

Tech Fanatic

iTrader: (29)

Join Date: Nov 2007

Posts: 933

Trader Rating: 29 (100%+)

Eccentrics

Hello goop

the front eccentrics sit each side below the blade sway bar in the front . they have the little tang on them
Cheers

Last edited by advfuel; 12-02-2007 at 10:28 PM.

12-02-2007, 09:24 PM

#2218

CDS70

Tech Addict

iTrader: (12)

Join Date: Jun 2006

Posts: 745

Trader Rating: 12 (100%+)

Quote:

Originally Posted by mrgsr

where is the cheapest advertised price at the moment for the 2008 spec nt1 ?

thanks
John

Doesn't Massivemods sell them, I see they are one of your sponsors.

12-02-2007, 10:35 PM

#2219

MAVICXXX

Tech Champion

Join Date: Feb 2004

Location: KL

Posts: 6,398

Trader Rating: 0

Quote:

Originally Posted by jaykay

Of course the mugen receiver holder fits on the NT1. I mean the original plastic one. It´s simple and works fine. The receiver should be fit more stable than with the graphite holder one.

Here a photo how it´s mount on teemu leino´s car: