1/8 scale Motonica P81 Electric
#18
kits
P81e kits and conversion kits are available thru Garen...
latest update:
run last weekend with the same setup 4s , tekin 2050kv , 20T pinion and with a 46T spur( using 47T before)... im still shy of straight away speed at glarcrc track... I will be doing 6s now for sure with the same motor
latest update:
run last weekend with the same setup 4s , tekin 2050kv , 20T pinion and with a 46T spur( using 47T before)... im still shy of straight away speed at glarcrc track... I will be doing 6s now for sure with the same motor
#20
Tech Champion
iTrader: (17)
P81e kits and conversion kits are available thru Garen...
latest update:
run last weekend with the same setup 4s , tekin 2050kv , 20T pinion and with a 46T spur( using 47T before)... im still shy of straight away speed at glarcrc track... I will be doing 6s now for sure with the same motor
latest update:
run last weekend with the same setup 4s , tekin 2050kv , 20T pinion and with a 46T spur( using 47T before)... im still shy of straight away speed at glarcrc track... I will be doing 6s now for sure with the same motor
Please share about motor temp after run and the total run time...possible 6 minutes hard running with 6S?
#21
Tech Adept
hi gareth been a while
decided to dust off the p81 now there is a electric conversion any chance you could email me a price please
ta
lee
rapid rc
decided to dust off the p81 now there is a electric conversion any chance you could email me a price please
ta
lee
rapid rc
#23
Tech Rookie
1/8 on-road electro: it is the international class? I can not find a rule of race and technical requirements. If who has the information, share, please.
#30
Tech Master
iTrader: (7)
No, one is going to be for display, and the other for me to race with. I will try to post some photos once they are all done. Chris Rupp from CR Bodies is painting them for me. One of them will be my old paintscheme, red/blue/orange with flames, and the other will be similar to one of the bodies shown on the Motonica website.
If you like them, and Chris can repaint some for me, I'll gladly sell it to you.
If you like them, and Chris can repaint some for me, I'll gladly sell it to you.