Warpspeed Demon and Demon 2
#1276
Tech Elite
Originally posted by ptjonesus
Does anybody have a setup for the D1 on low bite asphalt with rubber tires. I run stock class and my car spins out too easy comming out of the corners.
Does anybody have a setup for the D1 on low bite asphalt with rubber tires. I run stock class and my car spins out too easy comming out of the corners.
#1278
Tech Elite
Originally posted by ptjonesus
IT looks like all the setups are for carpet or for crs using form tires. I need a setup for low bite asphalt with rubber does any have this kind of setup.
IT looks like all the setups are for carpet or for crs using form tires. I need a setup for low bite asphalt with rubber does any have this kind of setup.
Ashphalt setup
Front
2 kickup
0 castor
1 toe out
ntc rack
copper spring
standard shock tower outer hole
front arm outer hole
camber link lower inner
front swaybar
Rear
no swaybar
camber link lower inner
red springs
rear shock tower outer
rear arm inner hole
R+3+0
shocks 40 weight oil #2 piston all the way around
tires take off 27
here is one from harley
#1279
Tech Elite
Originally posted by ptjonesus
IT looks like all the setups are for carpet or for crs using form tires. I need a setup for low bite asphalt with rubber does any have this kind of setup.
IT looks like all the setups are for carpet or for crs using form tires. I need a setup for low bite asphalt with rubber does any have this kind of setup.
FRONT
Blue springs
#2 piston
50w oil
rear tower on front
top shock mount third hole in
VerII arms lower mount outside hole
camber link inside upper
stock rack
4degree castor
F-o block
stock steering blocks
front sway bar(standard)
4.5mm ride hight
4mm droop
.5 degree toe out
1 degree neg camber
REAR
gold springs
#2 pistons
40woil
top shock mount outer hole
VerII arms out side mount hole
camber upper inner
rear hubs forward
losi 0 degree hubs
no sway bar
r-3-2 block
5mm droop
5mm ride hight
1.5 neg degree camber
#1280
Tech Adept
which Losi rear hubs do you use? I tried the xxxs rear hubs but they are to long where the dogbone doesn't reach. I think I bought the wrong ones.
#1282
Tech Elite
Originally posted by kevinm
which Losi rear hubs do you use? I tried the xxxs rear hubs but they are to long where the dogbone doesn't reach. I think I bought the wrong ones.
which Losi rear hubs do you use? I tried the xxxs rear hubs but they are to long where the dogbone doesn't reach. I think I bought the wrong ones.
#1283
Tech Elite
Originally posted by ptjonesus
Thank you I will try this setup today
Thank you I will try this setup today
#1284
Tech Adept
Originally posted by howard hudson
Thats wierd those are the ones I used and didnt have any problem
Thats wierd those are the ones I used and didnt have any problem
#1285
Tech Elite
Originally posted by kevinm
Man I must be losing my mind. I bought three sets of them and they stick out to far and the dogbone doesn't reach. I will take a picture tonight and show you the problem.
Man I must be losing my mind. I bought three sets of them and they stick out to far and the dogbone doesn't reach. I will take a picture tonight and show you the problem.
#1286
Tech Adept
Originally posted by howard hudson
OK and your sure they are for the XXX s and not one of the offroad cars
OK and your sure they are for the XXX s and not one of the offroad cars
#1287
Tech Elite
Originally posted by kevinm
Before I answer I'm gonna double check. I can't believe that I ordered the wrong ones twice but anything is possible.
Before I answer I'm gonna double check. I can't believe that I ordered the wrong ones twice but anything is possible.
should be pn 9854 from losi catalog
#1289
Tech Elite
Originally posted by ptjonesus
I run at delta raceway asphalt , stockton raceway carpet and hobbytown newark ca. asphalt
I run at delta raceway asphalt , stockton raceway carpet and hobbytown newark ca. asphalt