Team Associated RC10 B5m Mid-Motor & Rear Motor Thread
|
|||
Tech Fanatic
iTrader: (30)
Tech Adept
iTrader: (8)
does anybody know if you still need to put black diff grease in the schelle thrust bearing?
Tech Champion
iTrader: (14)
Tech Champion
iTrader: (170)
http://www.amain.com/rc-cars/yokomo-...-s100s/p242340
Tech Prophet
iTrader: (84)
What's the most motor you can run in a 3 gear factory lite and not compromise longevity too much? Can it handle a 13.5? A 10.5?
Thanks
Thanks
Turned break EPA up to 80%, and went from 1mm to 1.5mm on the front shock tower, dialed. Still needs a little work, but definitely is WAY faster then my Kyosho.
Just a little loose going into the corners, but might just be me over driving it.
Just a little loose going into the corners, but might just be me over driving it.
Tech Champion
iTrader: (221)
Tech Fanatic
iTrader: (61)
Personally cant think of anything, beyond the chassis that is less than what is a B5M standard and would take consideration. 3 gear isn't necessarily weaker. Just don't crash, chassis will be fine.
Thanks. It's in my 9 year old daughter's car with a Reedy 17.5. She's learning control really well, and is complaining about power when we're practicing outside, but I don't want her to put it into the wall at the carpet track, so I think I'm going to make her stick with this motor.
Hi,
What are people experiences with the 91608 +4mm Arm Mount.
Is it a improvement in all track conditions, or just for high traction tracks.
MiCk B. :-)
What are people experiences with the 91608 +4mm Arm Mount.
Is it a improvement in all track conditions, or just for high traction tracks.
MiCk B. :-)
I am doing similar with my B5. Im not adding any weight to front tought. Just taking it away from rear and I run battery forward position (square pack). Also as Im running mod class total weight is not that huge issue to me. Im still running less than 1600g of total weight.
Tech Initiate
iTrader: (2)
Alright just got a fat e- cash check from tower. If you guys had to get one spring set each for front and rear, what would you go with? Mostly racing on high- bite clay (critters raceway NJ). Oh and I'm running a 10.5 in the Lite which has white springs.
Or by sets do you mean the AE sets? Go with the medium sets.