Team Corally RDX Touring Car
#4246
Originally Posted by litespeed-dom
XRAY less expensive???
RDX carpet kit is ready to rock out of box at $440 w/ springs kit. FK05, if you didn't get the 2 chassis kit and that isn't going to last forever.... $350 for roller, $90 for 3mm chassis, $30 for top deck... I'm not sure if the new kits come with hard arms or not now, so that couldn't potentially be extra. BTW, $55 for springs set from XRAY. Sorry buddy, you just bend over and paid $525 to get an FK05 carpet foam ready and didn't know it. Everyone locally owns an XRAY look at my RDX like it's a piece of jewelry.
Dom
RDX carpet kit is ready to rock out of box at $440 w/ springs kit. FK05, if you didn't get the 2 chassis kit and that isn't going to last forever.... $350 for roller, $90 for 3mm chassis, $30 for top deck... I'm not sure if the new kits come with hard arms or not now, so that couldn't potentially be extra. BTW, $55 for springs set from XRAY. Sorry buddy, you just bend over and paid $525 to get an FK05 carpet foam ready and didn't know it. Everyone locally owns an XRAY look at my RDX like it's a piece of jewelry.
Dom
This is the delima that I had.... the RDX was actually cheaper!!!
Woody
#4247
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
pointless discussion.... go to your local shop and better off getting advice there!! especially on this CORALLY FORUM one is gonna actually ask which is better... then what goto the XRAY forum and see what they say there??
#4248
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
ROLL CALL!!!!
quick question.. are most RDX driver running what class??
Novice Stock
stock
19turn
mod
i would like to see a ROLL CALL?? we currently run 19turn, i tell ya what it is a pretty competitive, very fast class!!!
Novice Stock
stock
19turn
mod
i would like to see a ROLL CALL?? we currently run 19turn, i tell ya what it is a pretty competitive, very fast class!!!
#4250
Tech Master
iTrader: (11)
Originally Posted by RCFREAK
quick question.. are most RDX driver running what class??
Novice Stock
stock
19turn
mod
i would like to see a ROLL CALL?? we currently run 19turn, i tell ya what it is a pretty competitive, very fast class!!!
Novice Stock
stock
19turn
mod
i would like to see a ROLL CALL?? we currently run 19turn, i tell ya what it is a pretty competitive, very fast class!!!
19 turn & stock for me as well, Love the car!!!!!!
#4254
Tech Elite
iTrader: (4)
Originally Posted by Sushi Boy
-Stock, 19T and mod on asphalt with rubber tires
-Stock, 19T and mod on carpet with rubber Tires
-Stock, 19T, and mod on carpet with foam tires.
There I think that covers it
-Korey
-Stock, 19T and mod on carpet with rubber Tires
-Stock, 19T, and mod on carpet with foam tires.
There I think that covers it
-Korey
Dom
#4257
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
ok ok ... i thought most of you guys run stock.. since i received the car i never ran stock class. im pretty sure it really performs in stock!!
do you guys have enough steering in the car?? i find that on medium bite unless we have bigger race venues which we run 19turn. i still keep trying to find more turn in and steering throughout the turns.... motor wise.. when roll out is right the car has the same amount of speed.. but i can never find enough corner speed in the car.... pushes entering corner up to middle and decent exit steering... basically not enough steering. off throttle also!! i have to drive the car strapped to keep up with cars that carry more corner speed.
most aggressive ackerman
4 degree caster
front shocks in 1 hole
rears out
links short
regular roll center .. rear
ultra low ... front
30lbs in front
28lbs in rear
short wheelbase front and back
60 wt
40 wt
rcfreak
do you guys have enough steering in the car?? i find that on medium bite unless we have bigger race venues which we run 19turn. i still keep trying to find more turn in and steering throughout the turns.... motor wise.. when roll out is right the car has the same amount of speed.. but i can never find enough corner speed in the car.... pushes entering corner up to middle and decent exit steering... basically not enough steering. off throttle also!! i have to drive the car strapped to keep up with cars that carry more corner speed.
most aggressive ackerman
4 degree caster
front shocks in 1 hole
rears out
links short
regular roll center .. rear
ultra low ... front
30lbs in front
28lbs in rear
short wheelbase front and back
60 wt
40 wt
rcfreak
#4258
Tech Addict
iTrader: (1)
Originally Posted by RCFREAK
quick question.. are most RDX driver running what class??
Novice Stock
stock
19turn
mod
i would like to see a ROLL CALL?? we currently run 19turn, i tell ya what it is a pretty competitive, very fast class!!!
Novice Stock
stock
19turn
mod
i would like to see a ROLL CALL?? we currently run 19turn, i tell ya what it is a pretty competitive, very fast class!!!
19Turn
I have been know to strap in a 7turn from time to time
all on foam tires.
#4260
Tech Elite
iTrader: (20)
Join Date: Sep 2001
Location: MEMBER OF THE "MWC" Mimi Wong Clan
Posts: 2,442
Trader Rating: 20 (100%+)
cool... i wanted to make sure all the posts arent from stock class drivers.