Yokomo MR4TC-BD
#3196
Originally Posted by speedy-932
What's the order number? Unfortunately there are now images...
I think it should be:
TR2504T TiR C.V.D. MR4-SSG - MR4-SSG
Is it for the complete car? Or just a pair?
And where's the difference to this two?
TNM2504FS Steel C.V.D. MR4-SSG frt - MR4-SSG
TNM2504RS Steel C.V.D. MR4-SSG rear - MR4-SSG Rear
Thanks
Cheers
Chris
I think it should be:
TR2504T TiR C.V.D. MR4-SSG - MR4-SSG
Is it for the complete car? Or just a pair?
And where's the difference to this two?
TNM2504FS Steel C.V.D. MR4-SSG frt - MR4-SSG
TNM2504RS Steel C.V.D. MR4-SSG rear - MR4-SSG Rear
Thanks
Cheers
Chris
The part numbers for the new worlds CVDs are as follows..
TI2504FW - TiR Worlds Edition Yokomo SD Blue Front Driveshafts pr
TI2504RW - TiR Worlds Edition Yokomo SD Blue Rear Driveshafts pr
i think the part numbers you are refering to are for the old style TiR CVDs
Last edited by s2; 08-16-2005 at 01:45 PM.
#3197
Tech Regular
Thanks... will look for them...
Last edited by speedy-932; 08-16-2005 at 01:33 PM.
#3198
Originally Posted by pops
You can use the oneway outdrives from the SD, they have a larger inner diameter and will fit the TIRs. The BD outdrive's inner diameter is too small.
#3199
Has anybody been using the Rayspeed front CVD's with a front spool? How did they hold up? Do Pro4, TC4, or any other cars dogbones fit? I know there MIP based, so there should be atleast one other car with similiar bones.
thanks guys
chad
thanks guys
chad
#3200
Tech Adept
Right, built up my BD this evening (all except shocks which I will do tomorrow).
All in all the car went together really nicely, the quality of the parts and fit is amazing!!
Can anyone suggest a good starting setup for the BD on carpet with CS27's? I've had a look at Masami's LRP one but it seems quite a big jump from the stock settings.
Final note.... drivetrain.... how free should the belt drive be with no wheels attached? Mine seems smooth (no major resistance or inconsistancys) however it seems a little more bogged down than other cars I've seen. Obviously I still need to bed the bearings in with some run time but do you think I have missed something?
Cheers
Andy
All in all the car went together really nicely, the quality of the parts and fit is amazing!!
Can anyone suggest a good starting setup for the BD on carpet with CS27's? I've had a look at Masami's LRP one but it seems quite a big jump from the stock settings.
Final note.... drivetrain.... how free should the belt drive be with no wheels attached? Mine seems smooth (no major resistance or inconsistancys) however it seems a little more bogged down than other cars I've seen. Obviously I still need to bed the bearings in with some run time but do you think I have missed something?
Cheers
Andy
#3201
Tech Champion
iTrader: (31)
Originally Posted by Andy M
Final note.... drivetrain.... how free should the belt drive be with no wheels attached? Mine seems smooth (no major resistance or inconsistancys) however it seems a little more bogged down than other cars I've seen. Obviously I still need to bed the bearings in with some run time but do you think I have missed something?
Cheers
Andy
Cheers
Andy
#3202
Tech Champion
iTrader: (31)
Originally Posted by s2
The part numbers for the new worlds CVDs are as follows..
TI2504FW - TiR Worlds Edition Yokomo SD Blue Front Driveshafts pr
TI2504RW - TiR Worlds Edition Yokomo SD Blue Rear Driveshafts pr
i think the part numbers you are refering to are for the old style TiR CVDs
#3206
Originally Posted by JayBee
I know those say they are the World's Edition Yokomo SD CVD's, but will they fit the BD? -JB
#3208
Hi,
Think im abit confused as to which roll bar kits to get for this car.
Is the partno. ZS412F
this is the old MR4 front roll bar kit, is this the kit that fits the front roll bars on the BD or the rear? or is it not even this part?
I thought the rear roll bar was a rayspeed one?
I just need the other roll bar tensions for both ends of the car thats all but i cant seem to work out which ones are the right ones
Think im abit confused as to which roll bar kits to get for this car.
Is the partno. ZS412F
this is the old MR4 front roll bar kit, is this the kit that fits the front roll bars on the BD or the rear? or is it not even this part?
I thought the rear roll bar was a rayspeed one?
I just need the other roll bar tensions for both ends of the car thats all but i cant seem to work out which ones are the right ones
#3209
Tech Master
iTrader: (1)
Originally Posted by Sleighty
Hi,
Think im abit confused as to which roll bar kits to get for this car.
Is the partno. ZS412F
this is the old MR4 front roll bar kit, is this the kit that fits the front roll bars on the BD or the rear? or is it not even this part?
I thought the rear roll bar was a rayspeed one?
I just need the other roll bar tensions for both ends of the car thats all but i cant seem to work out which ones are the right ones
Think im abit confused as to which roll bar kits to get for this car.
Is the partno. ZS412F
this is the old MR4 front roll bar kit, is this the kit that fits the front roll bars on the BD or the rear? or is it not even this part?
I thought the rear roll bar was a rayspeed one?
I just need the other roll bar tensions for both ends of the car thats all but i cant seem to work out which ones are the right ones
#3210
JDM_DOHC_SiR
What do you run on the front then??? I am having loads of problems with the pins becoming loose or snapping so i was thinking of getting the TIR worlds ones all round.
When do you think the prototype ones will hit production pops?
What do you run on the front then??? I am having loads of problems with the pins becoming loose or snapping so i was thinking of getting the TIR worlds ones all round.
When do you think the prototype ones will hit production pops?