Ask Steve "The Evicerator" Weiss
#4517
The Evicerator
Going ok so far... doing my stuff and Charlie's being as that he's at the Birds...
Butter informed me that my thread is over 100,000 views strong!
I should put that on a sign somewhere like mcdonalds... "over 1 billion served" or something
Butter informed me that my thread is over 100,000 views strong!
I should put that on a sign somewhere like mcdonalds... "over 1 billion served" or something
#4518
Originally Posted by Evicerator
Going ok so far... doing my stuff and Charlie's being as that he's at the Birds...
Butter informed me that my thread is over 100,000 views strong!
I should put that on a sign somewhere like mcdonalds... "over 1 billion served" or something
Butter informed me that my thread is over 100,000 views strong!
I should put that on a sign somewhere like mcdonalds... "over 1 billion served" or something
LMFAO!!! The question is.....do you offer a "Super size value meal?"
#4519
The Evicerator
Damn straight!
#4522
The Evicerator
Tony,
I think the "standard" GTB 4 cell's should start shipping out of here relatively soon.. if not already!
I'm not sure on the "DSM Only" stuff though.
I think the "standard" GTB 4 cell's should start shipping out of here relatively soon.. if not already!
I'm not sure on the "DSM Only" stuff though.
#4523
Tech Fanatic
iTrader: (8)
Steve - Is the footprint of the 4-cell GTB really smaller than the regular GTB as advertised on Speedtech? Or was that a mis-print on Steve W's part? My understanding was that it was simply the same speedo minus the heatsink and with different wires. Also, does it come with the Trans-Cap? I am seeing people yank the trans-cap in favor of something smaller and flatter. Is this a Novak peice? Care to elaborate?
#4524
The Evicerator
Tony,
The footprint of both ESCs should be identical.
The 4 cell is *basically* the same ESC with:
-The heat sink plate instead of the large finned heatsink/fan assembly.
-16 AWG wire instead of 14 AWG.
-Input and Switch harness wires are directly soldered in...
-And upgraded software which includes different drag brake and minimum drive values
Hope this helps clear up any confusion!!
The footprint of both ESCs should be identical.
The 4 cell is *basically* the same ESC with:
-The heat sink plate instead of the large finned heatsink/fan assembly.
-16 AWG wire instead of 14 AWG.
-Input and Switch harness wires are directly soldered in...
-And upgraded software which includes different drag brake and minimum drive values
Hope this helps clear up any confusion!!
#4527
Yea, Steve. Get on it.
#4528
man i just saw the new novak flyer and i want to know who's dialed ride is on the front cover ? what up scuba
#4530
The Evicerator
Well I'm back from my root canal guys
It was pretty cool having the guy use some high tech tools on me though...!
It was pretty cool having the guy use some high tech tools on me though...!