92GTA

So what has everyone found to be the best servo horns to use on the V-One RRR?

The ones that came with the Futaba servos suck and would need WAY too much cutting and stuff and the kit didn't come with any

I see that Kyosho has a horn kit (KYOIF435) and they look ok but wanted to see if there was anything better? I need both.

Thanks!

Alex

Brian Bosley

iTrader: (13)

You want basically a set like these, flat with an aluminium ring around the base. These are ko, airtronics makes some in gold but I don't know who makes them for futaba off hand.

You will have to cut the horn at least one side off and you may be able to use the 2nd or 3rd hole. I had to shave my top deck to get additional clearance as well on the front near the ackerman link.

nitrodude

iTrader: (8)

Do you have to start a new thread for every question? There already is a RRR thread, put all your questions there, thank you.

92GTA

Sorry, I will from now on. Doing a search I saw only the FUTM2133 horn suggested and I need the other too.

Scott Fisher

iTrader: (28)

I always use aluminum servo horns. Trim them to fit as needed. Lots of companies sell them. (Ofna, dynamite, losi etc)

jca2000au

iTrader: (9)

http://www.rctech.net/forum/nitro-ro...ml#post6726228 Post 1823

92GTA

Thanks. That is in the fact the one I ended up ordering.