Martin Hofer

use the 13.5 setup I posted and just change the following:

reserved: 89 -> 81

switchpointrpm: 10000 -> 15000

and you should be set

gearing between 5,5 and 7,5 depending on the track

Richard Drury

Thankyou

Quietman

Hi
Going to run 1s lipo in 12
What would you set the esc to at present for 4cell i have been on prog3 but what else would you change on rhe settings to compensatw for the lower voltage going to run 4 turn in it
Also if running sensorless what timing would you use?
Thanks

yokemad

hi guys
is gm90 capable to do what gm120 does?
and is it as strong as gm120 @ stock 13.5T?
Are they comes with latest software or not?
cheers

pee vee

What do the RESERVED settings actually do?

when you take it from say 88 to 81?? what temp it shuts down at?? change lipo mode?


and RESERVED 2? what do they actually do??

CouldbeFaster

Martin,

Many Thanks for the quick reponse.... Trying it out later..

Thanks
Tristan

plummers

ok thanks martin for your soldering advice, i will probably send it in and get the new firmware and wires done at the same time.any idea of how much and how long it takes?? plummers

spud37

martin i wonder if you can help

Customer has a brand new 120 with version 7.2 software.
running standard mode 8 from factory, set using tx as customer has no pc
this has melted 3 motors, gm, novak and nosram
the motors are running at approx 100deg c after only 2 mins!
i cannot see what could be causing this ?
i will download settings and send gda when i have gda, but what could cause this?
i run same speedo same geraing and motor at club and mine run fine and only 60c.

Many Thanks

Richard Baker

phil goetty

from my experience mode 8 in 7.2 fw is too hot for stock motors. Try mode 6 or 7. difference can come from the driving style.

Martin Hofer

yeah that sounds like a plan
I cannot really tell you how long it takes but I'd say no longer than 2 weeks

mode 8 is quite hard on motors

which winds/batteries are we talking about?

jopor

Martin do you have any idea when
GM releases is second generation Genius 120?

Martin Hofer

as stated in the manual if you run sensorless the "timing without sensors"HAS TO BE SET to 30°
"timing with sensors" = 0°
then just use a 4T sensorless and you are good

yes for 13.5, the 90 is as good as the 120. I'm not sure if they get delivered with the new firmware though.

why don't people ever READ

there'S a question mark next to reserved in the pc software
if you click on that you see ALL extra function you can en- or disable

pee vee

alright, settle down.

the 'help' is largely translated rubbish..

Bruno Carmo

Hello pips

i need some help please...

ive bought a GM120 to put on my RC10 B4 (TT), to take of my ezrun...

i´me run whit a GM evo3 7,5T motor, and 25C hardcase lipo 2S

next week i´ve a indoor and i like to try my new esc GM120...


i need some help to choose the best mode:

i choose mode 4, and i work to a soft curve, soft start 0,50s, brake max 90 and fuul bake 90...

do you have any tips for me?

sorry for my bad english

Bruno, from Portugal

M.Abramowicz

iTrader: (1)

Info from Ralf:

Update für Genius 80, 95, 50, 85, 100 V7.7:

Der Fehler in der V7.6 wurde gefunden.
Bei der V7.7 ist jetzt auch Rückwärtsfahrt mit Sensoren möglich.

-------

url: http://forum.gm-racing.de/forum/topi...5-100-v77.aspx

-------
Good news from GM!

So we can update to new version if we want reverse with sensors

Regards!
m.