USGT
|
|||
#1021
Serpent 411 FF
It looks like a very nice kit, but you don't hear much about it (or nothing I could find) and saw that the weight difference allowed for FWD in USGT, I guess on a tight track with a lot of turns it could be good.
They are pricey though (esp just to 'try it out'), and I don't see ANY used ones out there.
Thanks,
-Rich
They are pricey though (esp just to 'try it out'), and I don't see ANY used ones out there.
Thanks,
-Rich
#1022
Tech Addict
iTrader: (21)
Not quite ready to race since I still need to trim the fenders a bit more, but here's my Protoform Camaro for USGT. Wanna guess my paint scheme for my VTA?
Just noticed the front of the rear fender is tucked in onto the tire in this pic. That'll get trimmed before I race it.
The wheelbase is a bit long for my TC6, but it works. I'm also running 3mm offset wheels as it's shown. I'm really diggin' it....
Just noticed the front of the rear fender is tucked in onto the tire in this pic. That'll get trimmed before I race it.
The wheelbase is a bit long for my TC6, but it works. I'm also running 3mm offset wheels as it's shown. I'm really diggin' it....
#1030
Tech Elite
iTrader: (9)
HPI #17503 - Chevrolet Corvette C6 Body (200mm)
PAINT (Scheme: Whelen Engineering - http://www.whelen.com/_MOTORSPORTS/index.php)
- RC254 Pactra Racing Red
- RC251 Pactra Sprint White
- RC250 Pactra Outlaw Black (wing)
- Rustoleum Painters Touch - Matte Clear (dull finish on wing)
Decals
- HPI decals included with body
- http://www.rctech.net/forum/painting...-stickers.html on inside of body (sponsor, checker board, #'s, hood flag)
Notes
The red is actually brighter in person.
PAINT (Scheme: Whelen Engineering - http://www.whelen.com/_MOTORSPORTS/index.php)
- RC254 Pactra Racing Red
- RC251 Pactra Sprint White
- RC250 Pactra Outlaw Black (wing)
- Rustoleum Painters Touch - Matte Clear (dull finish on wing)
Decals
- HPI decals included with body
- http://www.rctech.net/forum/painting...-stickers.html on inside of body (sponsor, checker board, #'s, hood flag)
Notes
The red is actually brighter in person.
Last edited by Matt Trimmings; 05-19-2016 at 09:29 PM.
#1031
Tech Elite
iTrader: (9)
HPI #17218 - Nissan 350Z Greddy/Twin Turbo Body (190mm)
PAINT (Scheme:Falken Tire - http://falkentire.com/community/motorsports)
- No. 28114 Testors/Model Masters (Lacquer) Tropical Turquoise - 1957 ((799AB)
- RC252 Pactra Blue Streak
- RC251 Pactra Sprint White (used as backing for Blue Streak)
Decals
- HPI decals included with body
- HPI paint mask template (Project HPI Team Falken) - http://www.hpiracing.com/news/2009080701/
- Sponsor decals sourced from local graphics company
Notes
Since I only use rattle cans, Tropical Turquoise was an okay match. Under bright sunlight, both the blue and turquoise look much lighter. I tested Tamiya TS-41 Coral Blue (Lacquer), but it was too blue. I also tested Tamiya PS-54 Cobalt Green, but it was too green & dark.
PAINT (Scheme:Falken Tire - http://falkentire.com/community/motorsports)
- No. 28114 Testors/Model Masters (Lacquer) Tropical Turquoise - 1957 ((799AB)
- RC252 Pactra Blue Streak
- RC251 Pactra Sprint White (used as backing for Blue Streak)
Decals
- HPI decals included with body
- HPI paint mask template (Project HPI Team Falken) - http://www.hpiracing.com/news/2009080701/
- Sponsor decals sourced from local graphics company
Notes
Since I only use rattle cans, Tropical Turquoise was an okay match. Under bright sunlight, both the blue and turquoise look much lighter. I tested Tamiya TS-41 Coral Blue (Lacquer), but it was too blue. I also tested Tamiya PS-54 Cobalt Green, but it was too green & dark.
Last edited by Matt Trimmings; 05-19-2016 at 09:29 PM.
#1032
Tech Regular
iTrader: (19)
He guys. Kind of new to gt scene but what wheel offset do you guys run. My track width is.187. I know join makes crazy offsets but they're all 26mm. I tried Ebay and local shops like tq or speedtech but of no chance. The only offset I saw were Tamiya with +2 24mm. Is there anymore companies making wider offsets? Thanks