Schumacher R12 Fusion
#16
Tech Fanatic
how does the car look like? any pic?
whats the strong point on the car?
does it have centax? metal shock?
roll bars?
whats the strong point on the car?
does it have centax? metal shock?
roll bars?
#18
Pass on the kit setup in the manual I'm not sure where they got that setup, but its not that good
Please refer to your setup sheet for setup #'s.
Front
tower/1
bulkhead/2
arm/2
hub/2
steering/2
arm sweep/0
piston/#2 vari
oil/55wt
spring/yellow
droop/2mm
swaybar/stock
castor/thin kwikclip back
camber/neg 1
toe/1deg out
ride height/4.5mm
tire/Take-off 40's(purple) 26mm
diff/yes
Rear
tower/2
bulkhead/2
arm/2
hub/2
piston/#2 vari
oil/50wt
spring/red
droop/3mm
swaybar/stock
in-board toe/0
toe-in/2.5deg
rear arm/spaced rear
camber/neg 1
ride height/5mm
tire/Take-off 40's(purple) 30mm
This setup is for a stock R12 and will be very comfortable to drive (pushy). The oneway is a huge advantage and will give the car way more steering, but will be harder to drive.
I will post a setup using all the hop-ups next.
Please refer to your setup sheet for setup #'s.
Front
tower/1
bulkhead/2
arm/2
hub/2
steering/2
arm sweep/0
piston/#2 vari
oil/55wt
spring/yellow
droop/2mm
swaybar/stock
castor/thin kwikclip back
camber/neg 1
toe/1deg out
ride height/4.5mm
tire/Take-off 40's(purple) 26mm
diff/yes
Rear
tower/2
bulkhead/2
arm/2
hub/2
piston/#2 vari
oil/50wt
spring/red
droop/3mm
swaybar/stock
in-board toe/0
toe-in/2.5deg
rear arm/spaced rear
camber/neg 1
ride height/5mm
tire/Take-off 40's(purple) 30mm
This setup is for a stock R12 and will be very comfortable to drive (pushy). The oneway is a huge advantage and will give the car way more steering, but will be harder to drive.
I will post a setup using all the hop-ups next.
Last edited by PW; 04-24-2003 at 06:49 AM.
#19
Tricked out R12
Front
Mission tower/3
bulkhead/alloy
arm/1
hub/alloy with low-ball
steering/2
arm sweep/0
piston/#2 vari
oil/60wt
spring/28lb
droop/2mm
swaybar/pro-bar mounted to lower arm
castor/thin kwikclip back
camber/neg 2
toe/0
ride height/4.5mm
tire/Take-off 40's(purple) 26mm Go to 43's front when very high-bite
oneway
Rear
Mission tower/3
bulkhead/alloy
arm/1
hub/alloy with low-ball
piston/#2 vari
oil/50wt
spring/25lb
droop/3mm
swaybar/pro-bar mounted to lower arm
in-board toe/0
toe-in/2.5deg
rear arm/spaced rear
camber/neg 1.5
ride height/5mm
tire/Take-off 40's(purple) 30mm
Both setups use protoform stratus 2.1
This setup has tons of corner speed
Front
Mission tower/3
bulkhead/alloy
arm/1
hub/alloy with low-ball
steering/2
arm sweep/0
piston/#2 vari
oil/60wt
spring/28lb
droop/2mm
swaybar/pro-bar mounted to lower arm
castor/thin kwikclip back
camber/neg 2
toe/0
ride height/4.5mm
tire/Take-off 40's(purple) 26mm Go to 43's front when very high-bite
oneway
Rear
Mission tower/3
bulkhead/alloy
arm/1
hub/alloy with low-ball
piston/#2 vari
oil/50wt
spring/25lb
droop/3mm
swaybar/pro-bar mounted to lower arm
in-board toe/0
toe-in/2.5deg
rear arm/spaced rear
camber/neg 1.5
ride height/5mm
tire/Take-off 40's(purple) 30mm
Both setups use protoform stratus 2.1
This setup has tons of corner speed
Last edited by PW; 04-24-2003 at 06:50 AM.
#20
Hay pat how you doing,I have just been waiting for the car to come out.Thanks for the set-up PW,I think I can find somthing in there to start with.Thanks agian Doug Lemmons
#22
No problem doug....
Fred....I actually really like the stock pipe so far with 3 different engines (Picco, Rossi & Sirio)
Fred....I actually really like the stock pipe so far with 3 different engines (Picco, Rossi & Sirio)
#24
I can't believe I forgot about the pistons....#2 vari-piston.
The stock pipe is legal as far as I know
The stock pipe is legal as far as I know
#25
I was there when The OLD MAN brought it in. Damn could the car roll anymore? Free little thing ain't it Fredo. I didn't get to see it race but it was quick. When the car dies and then rolls another 50 or so ft, thats a free car. Great job on it Fredo. Just remember come May 11. I'm back and the NTC-3 is back in action. All though Dan might just mistake us as boards, watch out!!
#27
Hey Fred...Yes, I'm running the stock pipe with the baffle.
#29
Yeah spooky, that weekend really was a washout!!!!