RC-Crazy

iTrader: (55)

none of those fit mine....do you have any body that fits 1/7 DM-1 Pro?

Herrsavage

Do the curved chassis braces from the CRT X2 also fit the DM-1 1/7? Or, to ask another way, do the CRT and CRT X2 braces have the same dimensions?

Also, before I buy some new braces, whether CRT or CRT X2, will they mount right up, or do I need anything else?

Are those CNC shock mount/cooling thingies worth getting for a non-Pro DM-1?

jneg

I had both X1 and X2 CRTs and only the X1 braces fit. The X2 are very different. What thingies are you talking about?

bobbyblaze

iTrader: (1)

..

Herrsavage

Thanks.. Will just get the X1 braces then and assume the Z-brace doesn't fit..

Livewire121

I moulded the light buckets out of 4mm lexan

jneg

To tell you the truth I don't know if it works or not. But looking at the chassis I don't think that there is enough room for it to fit. Maybe the X2 straight brace will fit but I can't say it, again I haven't tried it.

Herrsavage

Have found some Kingz Headz X1 braces for cheap, so might pick them up.. Can only assume that if stock Ofna X1 braces fit the DM-1, so will KH braces for the same car..

D Starks

How about using the ones off of the DM-ONE Pro?

part# 40694

Here is a link for the manual:

http://ofna.com/pdf/34320-DM1-PRO.pdf

Herrsavage

Just ordered the Kingz Heads X1 CRT rear chassis brace. Can only assume that it fits.

Will the rear alone reduce chassis flex, or is the front a must too? Thanks.

WildBillMassey

iTrader: (5)

We got the Porsche Bodies in from OFNA, but they all sold out immediately, but we have more on the way next week. There are about 30 of these left and then they will be gone forever. I snapped a picture before sending the last one out....

http://www.igthobbies.com/OFNA-OFN31...DY_p_1559.html

Livewire121

Hey Bill are they the clear porsche bodies?

WildBillMassey

iTrader: (5)

These are all painted silver. The clear ones have been discontinued and once these are sold they will be discontinued.

Herrsavage

Got the KZ rear brace in. Anybody know where I can get a front one - Kings Headz or Jammin CNC? So far I've only seen the Jammin parts sold together - f/r..

Herrsavage

Trying to track down a CNC front chassis brace. Found the CR buggy King Headz front brace at amain. Is it the same as the CRT truggy front brace? I know for ex. with associated the front braces are the same for RC8, RC8T, SC8, etc.. - just the rear braces differ.