LOSI 5IVE-T 4WD OFFROAD RACING TRUCK
#1486
The aluminum steering knuckles are stock and no I do not sue the aluminum dual servo mount. The plastic stock one works just great for me.
Last edited by FangsCPO; 05-17-2019 at 08:37 AM. Reason: Adding a photo.
#1492
Tech Initiate
Currently using the Troy Built one way start adapter and a threaded coupler with drill. So far, so good.
https://www.lowes.com/pd/genuine-parts-electric-start-drill-bit/1000860496?cm_mmc=shp-_-c-_-prd-_-sol-_-google-_-lia-_-154-_-trimmersedgersandaugers-_-1000860496-_-0&kpid&store_code=1524&k_clickID=go_1793151301_685 19298239_346820825233_aud-549623685082la-352051078504_c_9027276&gclid=Cj0KCQjw6cHoBRDdARIsA DiTTzZpmHaaxjRpxKAK0FyYilhHCwH3Bpe0uYjubBL9vB8UPfd g9KEfuBMaAoRIEALw_wcB
https://www.lowes.com/pd/genuine-parts-electric-start-drill-bit/1000860496?cm_mmc=shp-_-c-_-prd-_-sol-_-google-_-lia-_-154-_-trimmersedgersandaugers-_-1000860496-_-0&kpid&store_code=1524&k_clickID=go_1793151301_685 19298239_346820825233_aud-549623685082la-352051078504_c_9027276&gclid=Cj0KCQjw6cHoBRDdARIsA DiTTzZpmHaaxjRpxKAK0FyYilhHCwH3Bpe0uYjubBL9vB8UPfd g9KEfuBMaAoRIEALw_wcB
#1493
Tech Champion
iTrader: (136)
Currently using the Troy Built one way start adapter and a threaded coupler with drill. So far, so good.
https://www.lowes.com/pd/genuine-parts-electric-start-drill-bit/1000860496?cm_mmc=shp-_-c-_-prd-_-sol-_-google-_-lia-_-154-_-trimmersedgersandaugers-_-1000860496-_-0&kpid&store_code=1524&k_clickID=go_1793151301_685 19298239_346820825233_aud-549623685082la-352051078504_c_9027276&gclid=Cj0KCQjw6cHoBRDdARIsA DiTTzZpmHaaxjRpxKAK0FyYilhHCwH3Bpe0uYjubBL9vB8UPfd g9KEfuBMaAoRIEALw_wcB
https://www.lowes.com/pd/genuine-parts-electric-start-drill-bit/1000860496?cm_mmc=shp-_-c-_-prd-_-sol-_-google-_-lia-_-154-_-trimmersedgersandaugers-_-1000860496-_-0&kpid&store_code=1524&k_clickID=go_1793151301_685 19298239_346820825233_aud-549623685082la-352051078504_c_9027276&gclid=Cj0KCQjw6cHoBRDdARIsA DiTTzZpmHaaxjRpxKAK0FyYilhHCwH3Bpe0uYjubBL9vB8UPfd g9KEfuBMaAoRIEALw_wcB
Is there room to get that into the rear of the motor? I would like to see a picture to it in use. Thanks for your response.
#1494
The 2020 West Coast Nationals will be held at the Good Ol' Boyz RC Raceway in Bakersfield, California. Here are a few highlights from last year's racing action. You don't want to miss this race. It's going to be a awesome!
If you are interested in racing or learning more about the 2020 West Coast Nationals check out these FaceBook pages for more info: OBR Core Team News, Good Ol’ Boyz RC Club Raceway, Fear Farm 1/5 Scale RC Track Arizona and MOD
If you are interested in racing or learning more about the 2020 West Coast Nationals check out these FaceBook pages for more info: OBR Core Team News, Good Ol’ Boyz RC Club Raceway, Fear Farm 1/5 Scale RC Track Arizona and MOD
#1495
Hey guys.. looking at a 5T roller V2.. can anyone tell me the difference between the 2.0 and the V2? Curious if parts are interchangeable between the two and or are still available..
thanks
thanks
#1496
90% of the v1 and v2 parts are interchangeable, it's only the area around the centre driveline that has had major changes
To reduce the front driveshaft angle, the centre diff has been flipped around and moved about an inch back to the rear, and 1/2 an inch toward the centre line. This means the v1 centre driveshafts are a different length, and they are now also dogbones, as opposed to a dogbone on one end, and a coupler on the diff input end. The spur gear faces the front now. The engine mounting holes are also different as they're for the Zenoah engine, as opposed to the CY engine on the v1, so engine spacers are also different
#1497
[QUOTE=gavsta72;15701249]2.0 is the v2 so no difference there
90% of the v1 and v2 parts are interchangeable, it's only the area around the centre driveline that has had major changes
To reduce the front driveshaft angle, the centre diff has been flipped around and moved about an inch back to the rear, and 1/2 an inch toward the centre line. This means the v1 centre driveshafts are a different length, and they are now also dogbones, as opposed to a dogbone on one end, and a coupler on the diff input end. The spur gear faces the front now. The engine mounting holes are also different as they're for the Zenoah engine, as opposed to the CY engine on the v1, so engine spacers are also different[/QUOTE
thanks!!
so the fastest way to tell would be to see if the front driveshafts has a dog bone 2.0 or a coupler 1.0
90% of the v1 and v2 parts are interchangeable, it's only the area around the centre driveline that has had major changes
To reduce the front driveshaft angle, the centre diff has been flipped around and moved about an inch back to the rear, and 1/2 an inch toward the centre line. This means the v1 centre driveshafts are a different length, and they are now also dogbones, as opposed to a dogbone on one end, and a coupler on the diff input end. The spur gear faces the front now. The engine mounting holes are also different as they're for the Zenoah engine, as opposed to the CY engine on the v1, so engine spacers are also different[/QUOTE
thanks!!
so the fastest way to tell would be to see if the front driveshafts has a dog bone 2.0 or a coupler 1.0
#1498
[QUOTE=hookedup;15703213]
That's one way I guess. Another way is to see if the spur gear is facing toward the front and not the rear.
The steering bellcrank is also different, plus the v2 has the TLR gold(ish) couloured shocks with bleeder caps
Are you looking for a used roller or something? if you have pics post them up. I always see people selling "Losi 5iveT" when in actual fact I can tell it's one of the clones. You need to know what to look for
2.0 is the v2 so no difference there
90% of the v1 and v2 parts are interchangeable, it's only the area around the centre driveline that has had major changes
To reduce the front driveshaft angle, the centre diff has been flipped around and moved about an inch back to the rear, and 1/2 an inch toward the centre line. This means the v1 centre driveshafts are a different length, and they are now also dogbones, as opposed to a dogbone on one end, and a coupler on the diff input end. The spur gear faces the front now. The engine mounting holes are also different as they're for the Zenoah engine, as opposed to the CY engine on the v1, so engine spacers are also different[/QUOTE
thanks!!
so the fastest way to tell would be to see if the front driveshafts has a dog bone 2.0 or a coupler 1.0
90% of the v1 and v2 parts are interchangeable, it's only the area around the centre driveline that has had major changes
To reduce the front driveshaft angle, the centre diff has been flipped around and moved about an inch back to the rear, and 1/2 an inch toward the centre line. This means the v1 centre driveshafts are a different length, and they are now also dogbones, as opposed to a dogbone on one end, and a coupler on the diff input end. The spur gear faces the front now. The engine mounting holes are also different as they're for the Zenoah engine, as opposed to the CY engine on the v1, so engine spacers are also different[/QUOTE
thanks!!
so the fastest way to tell would be to see if the front driveshafts has a dog bone 2.0 or a coupler 1.0
The steering bellcrank is also different, plus the v2 has the TLR gold(ish) couloured shocks with bleeder caps
Are you looking for a used roller or something? if you have pics post them up. I always see people selling "Losi 5iveT" when in actual fact I can tell it's one of the clones. You need to know what to look for
#1499
Few pics here of new 5iveT 2.0 build. I'll take it out today and start breaking in the engine
- OBR 34 Signature Series with "Frosty" engine wrap
- Joker Designs "Game Over" body wrap on the 30n Big Fles body, AAA rear wing
- VRC big bore pipe
- Hilantronics 7000 70kg steering, stock Losi throttle/brake servo
- Modified RC centre diff
- MOD rear diff inserts
- MadMax giant grip tyres
- OBR 34 Signature Series with "Frosty" engine wrap
- Joker Designs "Game Over" body wrap on the 30n Big Fles body, AAA rear wing
- VRC big bore pipe
- Hilantronics 7000 70kg steering, stock Losi throttle/brake servo
- Modified RC centre diff
- MOD rear diff inserts
- MadMax giant grip tyres
Last edited by gavsta72; 11-13-2020 at 12:35 PM. Reason: add another pic
#1500
Tech Regular
iTrader: (9)
I see some amazing machines here. Can you help me understand the current status of 5th scale off-road racing in the US? I see all our Texas tracks have closed. Is there any racing in neighboring states, OK, LA, NM? Even if its a monthly race. I used to race HPI Baja and FGs back in the day and it was fun.