CEFX Racing Thread.
#302
Tech Regular
Here's a good starting point for carpet:
Front:
Springs 0.018 with Kyosho yellow lube on kingpins
Blocks 5 deg - Caster in middle
Camber -1.5
Front Ride Height 3.5mm - 4mm
Rear:
T-plate .062 Med with 2 screws on pod.
Tubes Kyosho yellow grease (I've also used red stuff)
Ride Height: 4mm
Shock:
kit shock 30wt or IRS shock 35wt
Olive center spring
Tires:
Pink rears and double pink or purple fronts depending on the track.
Front:
Springs 0.018 with Kyosho yellow lube on kingpins
Blocks 5 deg - Caster in middle
Camber -1.5
Front Ride Height 3.5mm - 4mm
Rear:
T-plate .062 Med with 2 screws on pod.
Tubes Kyosho yellow grease (I've also used red stuff)
Ride Height: 4mm
Shock:
kit shock 30wt or IRS shock 35wt
Olive center spring
Tires:
Pink rears and double pink or purple fronts depending on the track.
#303
Tech Master
iTrader: (1)
Hello All,
I've been away the past few days trying to catch up on a lot of stuff as well as spending a bit of time at the hospital with my wife, welcoming our 2nd lil one!! It's scary to think she's bigger and stronger than my firt daughter!! All is well so it means I am back to work.
Yesterday, we did some testing with Mr. Blackstock and found a few very interesting things with the C12. With the current set-ups we use on the C12, we always seem to need just a bit more on-throttle steering and slightly less initial steering into the corner - especially on high bite tracks at the major events. I planned out about 8-12 things I wanted to test with Mike and we only made it to #2 before the day was done and .15-.2 per lap was found..
I'm working on the files right now.... Images, more info coming soon with details on these:
Brushless Upper Pod Plate (3mm graphite)
Brushless Lower Pod Plate (3mm graphite)
Center Shock mount
I've been away the past few days trying to catch up on a lot of stuff as well as spending a bit of time at the hospital with my wife, welcoming our 2nd lil one!! It's scary to think she's bigger and stronger than my firt daughter!! All is well so it means I am back to work.
Yesterday, we did some testing with Mr. Blackstock and found a few very interesting things with the C12. With the current set-ups we use on the C12, we always seem to need just a bit more on-throttle steering and slightly less initial steering into the corner - especially on high bite tracks at the major events. I planned out about 8-12 things I wanted to test with Mike and we only made it to #2 before the day was done and .15-.2 per lap was found..
I'm working on the files right now.... Images, more info coming soon with details on these:
Brushless Upper Pod Plate (3mm graphite)
Brushless Lower Pod Plate (3mm graphite)
Center Shock mount
#304
Tech Addict
iTrader: (15)
Josh, I heard you were making the plates wider to take advantage of the new offset of the new jaco wheels. I was wondering if you were also trying to do anything as far as centering the weight of the BL motors in the pod since they are heavier on what used to be the endbell end of the motors?
#305
Yes I believe Josh is balancing the weight for the brushless motor plates.
I'm sure we'll know soon!
I'm sure we'll know soon!
#306
crisis641, Hey Mike, Good to see ya still interested in Cefx When are you starting to race???
Later Roger T
Later Roger T
#308
Tech Regular
It's the Kyosho yellow diff grease for gas cars. I think you can order it from www.CEFXraceway.net if your local hobby shop doesn't have it.
#309
Heelo!Mr.Josh Cyrul.
I want communication from you immediately. I informed it of the part which was necessary for an all-Japan championship performed from September 28. You give me an email whether it is answered this request. I ask!
I want communication from you immediately. I informed it of the part which was necessary for an all-Japan championship performed from September 28. You give me an email whether it is answered this request. I ask!
#310
#311
Anyone racing 1/12th on Sunday?
-Rich
-Rich
#312
Tech Adept
yep,
I'll be there Rich. Possibly some guys from GR too... What class would you like to run? I'm game for anything.
Jeremy
I'll be there Rich. Possibly some guys from GR too... What class would you like to run? I'm game for anything.
Jeremy
#313
Ah, cool!
I still have to build my car but my goal is to have it done by Sunday.
I am planning on racing mod since all I have is a 10.5 brushless motor. The batteries I have are probably pretty poopy since I last ran them at last year's Halloween Classic. So, I will most likely dump at the two minute mark.
-Rich
I still have to build my car but my goal is to have it done by Sunday.
I am planning on racing mod since all I have is a 10.5 brushless motor. The batteries I have are probably pretty poopy since I last ran them at last year's Halloween Classic. So, I will most likely dump at the two minute mark.
-Rich
#314
Tech Fanatic
iTrader: (9)
Ah, cool!
I still have to build my car but my goal is to have it done by Sunday.
I am planning on racing mod since all I have is a 10.5 brushless motor. The batteries I have are probably pretty poopy since I last ran them at last year's Halloween Classic. So, I will most likely dump at the two minute mark.
-Rich
I still have to build my car but my goal is to have it done by Sunday.
I am planning on racing mod since all I have is a 10.5 brushless motor. The batteries I have are probably pretty poopy since I last ran them at last year's Halloween Classic. So, I will most likely dump at the two minute mark.
-Rich
2 minutes is more then enough time to peal everyone...
#315
Tech Regular
Maybe I'll loan the LiPo to Rich so he can run it out the back door. It'll give him an extra 6 minutes to take out BA Baracus.