Azagar

iTrader: (7)

I use 35 with 68mm red springs in the rear (112mm) and 30 with 60mm white springs for the front. Has been great for me so far.

timritchieblue

iTrader: (4)

For bashing what's a good set up?? I have never realy set up a car before.


I have orange, blue, silver, and white springs
Stock shocks, and 112mm shocks??? I think they all have 35wt in?
I just bought the pition set with 1.2, 1.3, 1.4 pistions
I have some 70wt oil??? Trying to stop bottoming out

I have a extra cente diff with 5000wt, what would that do?

Will be installing hara cvds tonight, no more dog bones?

timritchieblue

iTrader: (4)

Help, I keep losing the lower pin that hols the rear hub on?? Its about 1 3/4" long? How do I keep it from coming out. Their was a post about captured pins??? Can't fimd it?? Please help

Granby

There should be a screw at each end on the lower arm that keeps the pin in place

Z4Kevo

iTrader: (7)

What you want is here...

http://www.rctech.net/forum/9390159-post5902.html

bigugly78cj5

iTrader: (1)

Could someone point me towards a good lipo battery faq/beginners website as well as charging ?... been looking into what batteries to go with for the Vorza if i should go with a High MAH and C ratings and if 2x2S is the same as 1 4S battery or what, its all starting to kinda blur together and need some clarification. looking to get around 2-4 batteries dependings on if i need a pair/single...

timritchieblue

iTrader: (4)

Hard day for the vorza today... truggy tires on 6s front flips, back flips 20 ft + air.

And then 4 lipo packs throught, hit truck @ 40+. Front tower, center drive axle, strerring brace. Got lots of work todo. Has anyone swaped out diff towers on the front??? Drive cups limit any adj in travel???


HOW DO I straightin cvs???? I'm getting a pile of bent ones, please help

timritchieblue

iTrader: (4)

Thanks for the link, any cheaper than $15 shipped for2?

Z4Kevo

iTrader: (7)

Not that I have found...but definitely worth the $ IMO. Pins never come out and they are pretty darn stiff. I bought 4 sets total (front and rear w/ backups) and have yet to bend one..and I have had some pretty crazy tumbles.

timritchieblue

iTrader: (4)

Vorza night??? Just installed rear shock tower in the front, adj my set pins on my arms. Got some major clearance.. more to come center drive upgrade install next

timritchieblue

iTrader: (4)

Swapin out diffs stock 100000wt on right, d8 5000wt diff going in

O and some bent cvs...ick

timritchieblue

iTrader: (4)

D8 cvds do fit in the center drive, no more dog bones their...

Now off to the rear for some 112mm shocks and tower install. Ill be bending the tabs on the frame for more travel??

My drive train moves so free now?? The stock center diff was like locked??

timritchieblue

iTrader: (4)

Because I care,,, rear shock tower and cvd install in rear. 112mm shock install
Bent the tabs on the chassis for more travel in the rear??

timritchieblue

iTrader: (4)

All better now, nite.

Ill see wht breaks tomarrwo

timritchieblue

iTrader: (4)

Mission accomplished. Monster travel wheelie popin basher