What is the FASTEST motor for TC3?
#16
#20
Can't beat a 18TZ for simple drop-in power!
#22
You need...
http://67.199.85.166/main/productdet...ory=4016.ntc3x
And..
http://67.199.85.166/main/productdet...ory=4016.ntc3x
To run the 18TZ.
http://67.199.85.166/main/productdet...ory=4016.ntc3x
And..
http://67.199.85.166/main/productdet...ory=4016.ntc3x
To run the 18TZ.
#23
Tech Master
The associated pipe is ok put if you can fit this one from Vantage Racing it would be a better choice especially if you modify the motor. I have one on my V1RRR which has a .18TZ in it . I had my .18TZ on my TC-3 first with the associated pipe and the pipe held back the motor performace but when I put the .18TZ in the V-1RRR with the Vantage pipe it came alive. Link to their website http://www.vantageracing.com
#24
Tech Master
It is a compact pipe designed to fit in tight spaces.
#26
Tech Master
You are right the header pipe will not work would have to design your own header pipe which is what I did with mine. I lost most of my pictures of my Nitro TC-3 here is a rought sketch.
Last edited by nitrohead5300; 03-27-2010 at 01:27 PM.
#27
Tech Master
hERE IS A PICTURE BAD ANGLE
#28
Tech Master
tHATS WITH A .28 SIZE MOTOR IN IT.
#30
Tech Master
BEST BET WOULD BE TO CALL UP SOME OF THE ENGINE MODIFIERS TO FIND OUT WHAT THE BEST HEADER PIPE COMBINATION FOR A MODIFIED .18TZ IS.