Exotek F1R
#2525
Tech Elite
iTrader: (22)
The F1R3 is sold as a conversion and doesn’t come with the front springs. If you bought it as a complete chassis from someone it is hard to say what springs they had in the front or even what side springs they used. There are many of both types of springs from many manufacturesrs that will work with the F1R3. Associated are the side springs that come with the conversion. If your front silvers seem softer than Silver Tamiyas then the could be another brand. I typically use the Tamiyas since the car is a converted Tamiya and I have plenty of Tamiya springs.
#2526
Tech Addict
iTrader: (19)
The F1R3 is sold as a conversion and doesn’t come with the front springs. If you bought it as a complete chassis from someone it is hard to say what springs they had in the front or even what side springs they used. There are many of both types of springs from many manufacturesrs that will work with the F1R3. Associated are the side springs that come with the conversion. If your front silvers seem softer than Silver Tamiyas then the could be another brand. I typically use the Tamiyas since the car is a converted Tamiya and I have plenty of Tamiya springs.
#2527
Tech Master
iTrader: (2)
#2528
Tech Addict
iTrader: (1)
Just got the Exotek F1r3 car in the mail!! Really awesome looking car--heading to Hitec tomorrow for new radio and gear!! I'm hoping to get it together by Saturday so I can get some testing in with this baby!! I've gotta find a battery to put in it. Ordered the Fantoms--but they won't be here till next week. Maybe someone at the track will have one I can borrow for practice?
Last edited by Tim Neja; 02-25-2018 at 01:02 PM.
#2532
Finally had time today to work on my F1r3 I missing the small carbon piece that goes across the servo is there anyway I can get a replacement
#2533
Tech Adept
TQRC also sells the Tamiya one which will work: https://www.tqrcracing.com/shop/prod....asp?p_id=5012
But I have a spare Exotek one by itself, unused if you're interested. Just send me a PM.
#2534
You can get a replacement kit of all the small carbon F1R3 pieces straight from Exotek: EX05- TA05 V2 LIPO CHASSIS
TQRC also sells the Tamiya one which will work: https://www.tqrcracing.com/shop/prod....asp?p_id=5012
But I have a spare Exotek one by itself, unused if you're interested. Just send me a PM.
TQRC also sells the Tamiya one which will work: https://www.tqrcracing.com/shop/prod....asp?p_id=5012
But I have a spare Exotek one by itself, unused if you're interested. Just send me a PM.
#2535
What’s a good Grease for the side dampeners to start with in the R3 I put Tamaya antiwear grease in and it feels really stiff.still building the car.it will run on a large asphalt track I am also going to use the IFS .in the top shock I put 25wt oil and 3 hole piston per manual. Thanks. Jerry