FlySky Noble NB4
#106
They shipped my order for a screw set in one day a few months ago. I don't know about communication as I'e never had to message them.
#107
so i should prob note down my settings for all vehicle slots before I do this update?
#108
Yep. It resets all settings.
#109
#110
#111
Or maybe he just got a junk receiver. I have 6 FGr4S receivers, havent had a single issue with any of them, but it happens.
#112
Im looking to pickup one of these radios in a few months. looking forward to testing this out vs my dx5r.
#113
Interesting news. I talked to FlySky and told them the numbers on the voltage regulator ICs that are in the sensors I was using and they *are* the updated ones that use 8.4V max voltage regulators. I've asked them what could possibly lead to my FGr4 receivers disconnecting from my transmitter and until then I will solely be using FGr4s receivers as I haven't had any issues with those.
#114
Need Help,
I just received My Noble NP4. I'm using it for my crawlers. My question is how do I setup channel 3 for a light switch and channel 4 for my servo winch?
Also SW2 is printed on both side next to the wheel. Manual shows SW2 on one side and SW3 on the other. Is this an error?
I just received My Noble NP4. I'm using it for my crawlers. My question is how do I setup channel 3 for a light switch and channel 4 for my servo winch?
Also SW2 is printed on both side next to the wheel. Manual shows SW2 on one side and SW3 on the other. Is this an error?
#115
What I used for the flysky nb4 noble mini receiver ..
#116
Need Help,
I just received My Noble NP4. I'm using it for my crawlers. My question is how do I setup channel 3 for a light switch and channel 4 for my servo winch?
Also SW2 is printed on both side next to the wheel. Manual shows SW2 on one side and SW3 on the other. Is this an error?
I just received My Noble NP4. I'm using it for my crawlers. My question is how do I setup channel 3 for a light switch and channel 4 for my servo winch?
Also SW2 is printed on both side next to the wheel. Manual shows SW2 on one side and SW3 on the other. Is this an error?
#117
Still no changelog but my radio worked great for both cars at the track this weekend. I am running the new firmware and updated my FGr4 and FGr4s receivers. Zero issues of any sort. Perhaps I just needed to update the firmware on my FGr4 to match the TX?
#118
Mailman showed up with a Noble on the door today.. Never seen one in real life before i bought it, but the few reviews i`ve seen looked promising.
Havent had a car radio for a while, last one was a Futaba 4pk.
Very impressed so far. Love the display, and the battery solution even more. Everything feels solid and high end.
I did put in a double sided tape under the display, to lock the steering wheel slide thingy though, i dont care for it to be movable.
Oh, and it can be used directly agaist my win10 computer for VRCpro simulator, by only using USB cable and enable «noble emulator» in the system usb menu, no need for a dongle.
Thumbs up!
Havent had a car radio for a while, last one was a Futaba 4pk.
Very impressed so far. Love the display, and the battery solution even more. Everything feels solid and high end.
I did put in a double sided tape under the display, to lock the steering wheel slide thingy though, i dont care for it to be movable.
Oh, and it can be used directly agaist my win10 computer for VRCpro simulator, by only using USB cable and enable «noble emulator» in the system usb menu, no need for a dongle.
Thumbs up!
#119
Mailman showed up with a Noble on the door today.. Never seen one in real life before i bought it, but the few reviews i`ve seen looked promising.
Havent had a car radio for a while, last one was a Futaba 4pk.
Very impressed so far. Love the display, and the battery solution even more. Everything feels solid and high end.
I did put in a double sided tape under the display, to lock the steering wheel slide thingy though, i dont care for it to be movable.
Oh, and it can be used directly agaist my win10 computer for VRCpro simulator, by only using USB cable and enable «noble emulator» in the system usb menu, no need for a dongle.
Thumbs up!
Havent had a car radio for a while, last one was a Futaba 4pk.
Very impressed so far. Love the display, and the battery solution even more. Everything feels solid and high end.
I did put in a double sided tape under the display, to lock the steering wheel slide thingy though, i dont care for it to be movable.
Oh, and it can be used directly agaist my win10 computer for VRCpro simulator, by only using USB cable and enable «noble emulator» in the system usb menu, no need for a dongle.
Thumbs up!
I dont know what the deal is, but I cant get either of mine to work on my pc as a controller. I think its a USB driver thing.
I have had a good amount of time using the radio in direct sunlight now, and I have to say, I dont think the display in sunlight concern is an issue. Seems bright enough, and once things are dialed in, Im not really looking at it that much anyway. So, time spent modeling a sun shield, wasted? Yeah probably, far from the only thing I have wasted time on. lol
Last edited by MrOflam; 07-16-2019 at 11:11 AM.
#120
What version of Windows are you using? It works for me on Windows 10. You just have to set it to Noble emulator in the USB settings on the TX before plugging it in.