Serpent Project 4-X
|
|||
#152
#153
i need to get one! unfortunately, I need to let of a few cars first. anyone interested in Tamiya stuff
#156
Tech Regular
iTrader: (18)
#157
Tech Elite
iTrader: (109)
Originally Posted by LOW ET
http://www.serpentamerica.com/shop/p...cat=181&page=1
http://www.serpentamerica.com/shop/p...cat=181&page=1
#159
Tech Regular
iTrader: (18)
i think he means this chassis: http://www.redrc.net/2016/12/mcfacto...-main-chassis/
#160
Jan have some option parts release !
#162
have new option parts coming soon !
#163
Tech Champion
iTrader: (62)
So I have 2 issues I need to get sorted out. My heave dampers seem to have air in them that I can't seem to get out. I've built the dampers stock, with x-rings instead of o-rings, with and with out green slime....and I still have a little air in the dampers. Anybody got any solutions?
2nd issue is the ball ends, they are very brittle. Seems like each time I build this car I crack one. Possibly my fault......but just in case it's not anybody have this issue? Any solutions, short of using another brand of ball ends?
2nd issue is the ball ends, they are very brittle. Seems like each time I build this car I crack one. Possibly my fault......but just in case it's not anybody have this issue? Any solutions, short of using another brand of ball ends?
#164
Tech Elite
iTrader: (65)
Hey Teach,
The plastic shock caps need to be real tight. I also let the dampers sit for a while to air out the bubbles. Green slime and HPI #6820 silicone o rings and it works great.
I haven't broke a ball end yet but I do have to use pliers to snap them on as they are such a hard plastic. Haven't tried any other ball ends yet but I'll see what I can figure out today.
The plastic shock caps need to be real tight. I also let the dampers sit for a while to air out the bubbles. Green slime and HPI #6820 silicone o rings and it works great.
I haven't broke a ball end yet but I do have to use pliers to snap them on as they are such a hard plastic. Haven't tried any other ball ends yet but I'll see what I can figure out today.
#165
Tech Elite
iTrader: (84)
So I have 2 issues I need to get sorted out. My heave dampers seem to have air in them that I can't seem to get out. I've built the dampers stock, with x-rings instead of o-rings, with and with out green slime....and I still have a little air in the dampers. Anybody got any solutions?
2nd issue is the ball ends, they are very brittle. Seems like each time I build this car I crack one. Possibly my fault......but just in case it's not anybody have this issue? Any solutions, short of using another brand of ball ends?
2nd issue is the ball ends, they are very brittle. Seems like each time I build this car I crack one. Possibly my fault......but just in case it's not anybody have this issue? Any solutions, short of using another brand of ball ends?