TLR TEN-SCTE 2.0 Kit Thread
#1502
Tech Addict
#1503
Suspended
If you want them back, send beer.
#1504
Tech Master
iTrader: (9)
Aint no thang homie...glad to help! Got the laptop sitting next to my build so if i got issues i can go back and look
The pages go so fast i want to say go back a page or 2 and someone posted a pic with the 275 installed but with all the high school girlie antics its pry actually 20 pages back
The pages go so fast i want to say go back a page or 2 and someone posted a pic with the 275 installed but with all the high school girlie antics its pry actually 20 pages back
#1506
#1507
Tech Adept
[QUOTE=TCCustoms;11904686]YA, the the instructions are not helping...they have you slide the chassis in to the front end and screw it all together but before all this they have you attach the body mount to the CF tower and yet you have to go back and remove it to tighten down the front 2 screws on the front top plate...NOT HELPING, lol
Well....Thanks for that info! It will certainly make it easier on me when I get to build mine.
Well....Thanks for that info! It will certainly make it easier on me when I get to build mine.
#1508
Tech Master
iTrader: (9)
normally i would apply it to the bolt im screwing in...but with the servo saver i turned it in all the way and backed it off the 3/4 to 1 full turn and remembered where it was located and then backed it off far enough to were i could get a few drops on the threads of the servo saver tube then tightened it back up to where it was
#1509
normally i would apply it to the bolt im screwing in...but with the servo saver i turned it in all the way and backed it off the 3/4 to 1 full turn and remembered where it was located and then backed it off far enough to were i could get a few drops on the threads of the servo saver tube then tightened it back up to where it was
#1510
Tech Master
iTrader: (25)
Awesome kit TLR! Everything went smooth.Had a little bit of a time getting the bottom of the shock caps on but it was expected because i did my research before hand.Definately had a blast building it though.One question what size sensor wire you use on this Ryan. Nothing i had was long enough! Thanks guys,now lets go whoop on some Teknos!
#1511
Tech Adept
iTrader: (30)
Sounds like a good idea to me Ryan, I pre ordered my truck from revelation raceway on February 20th right here in Ontario California where the video was shot of 2.0 testing on tlr site and he said I'm not getting my truck until next week even though its sitting at the horizon warehouse which is 10 mins from revelation raceway.... everyone else across the states has there's built, lol
At least I'm not the only waiting and drooling on everyone's rides, keep the pics coming.
At least I'm not the only waiting and drooling on everyone's rides, keep the pics coming.
The SCTE 2.0 was the first surface product in TLR to be shipped on this program. We tested it and it turns out, the track owners could not get the product which is what is best for the consumer. For the immediate future, such as the 8 3.0, TLR will not be part of this program any longer. We are working on something that works for the tracks. We were going to pull the SCTE 2.0 off, but with less than a week, and the fact it had already been communicated and advertised, it was left on the program. I apologize for the confusion, but I was taking all of your feedback and also tracks feedback and putting a case together which helps future TLR products.
Last edited by yz167; 03-07-2013 at 07:31 PM.
#1515
Tech Apprentice
The amount a store spends is only one of the options, the percentage they order from Horizon can also allow them in the program. Most dont join because they choose not to fill out the paperwork or dont want to provide reports. We are trying to find ways to provide the best hobby experience for our customers and this is new so we are figuring it out.