HK Talk Version 1.1
11-12-2001, 10:42 PM
#2071
Originally posted by dtm
No the servo is so quick it moves before you move your fingers!!
No the servo is so quick it moves before you move your fingers!!
11-12-2001, 10:43 PM
#2072
Originally posted by dtm
Thats when you go from a 2.6mm screw to a 3mm screw for Futabas, or a 12mm length screw to a 15mm length screw for KOs. So far no real complaints for EP. I find that the metal gears in my 9402 has quite a lot of backlash also.........
And don't forget most metal gear servos have one plastic gear in the system as a weak link!!! So if it breaks....it breaks.... regardless of metal or plastic!
Thats when you go from a 2.6mm screw to a 3mm screw for Futabas, or a 12mm length screw to a 15mm length screw for KOs. So far no real complaints for EP. I find that the metal gears in my 9402 has quite a lot of backlash also.........
And don't forget most metal gear servos have one plastic gear in the system as a weak link!!! So if it breaks....it breaks.... regardless of metal or plastic!
11-12-2001, 10:55 PM
#2073
Originally posted by Diva
How frequent do you put on and take off your horn? Frankly, I seldom do that. Even if your gears went worn, there are replacement parts out there. You can't expect everything went perfect without wearing in R/C. To me, I've tried 9402, 2000, 2015, 2143, 2144, etc., 2015 is always my pick for EP.
How frequent do you put on and take off your horn? Frankly, I seldom do that. Even if your gears went worn, there are replacement parts out there. You can't expect everything went perfect without wearing in R/C. To me, I've tried 9402, 2000, 2015, 2143, 2144, etc., 2015 is always my pick for EP.
11-12-2001, 10:56 PM
#2074
Originally posted by Disaster999
but doont you think that 0.05sec is a bit OVERKILL for the ep car??
but doont you think that 0.05sec is a bit OVERKILL for the ep car??
11-12-2001, 11:00 PM
#2075
Originally posted by Disaster999
but doont you think that 0.05sec is a bit OVERKILL for the ep car??
but doont you think that 0.05sec is a bit OVERKILL for the ep car??
11-12-2001, 11:20 PM
#2077
Originally posted by Disaster999
hahah...thats right...those hardcore racing products for just for shows...hahah....
hahah...thats right...those hardcore racing products for just for shows...hahah....
11-12-2001, 11:42 PM
#2078
Fai, i have bought the alloy batt hold down bar, 2.1mm upper deck and alloy shocks body (from square) to make my LE kit over $2,000. I think I will only get the alloy spur adapter then. Thanks for your advise ! Are u running the stock springs or what ?
11-12-2001, 11:44 PM
#2079
Tech Addict
another HK pro3 owner... thats great ernestf
11-13-2001, 12:54 AM
#2082
Originally posted by ernestf
Fai, i have bought the alloy batt hold down bar, 2.1mm upper deck and alloy shocks body (from square) to make my LE kit over $2,000. I think I will only get the alloy spur adapter then. Thanks for your advise ! Are u running the stock springs or what ?
Fai, i have bought the alloy batt hold down bar, 2.1mm upper deck and alloy shocks body (from square) to make my LE kit over $2,000. I think I will only get the alloy spur adapter then. Thanks for your advise ! Are u running the stock springs or what ?
11-13-2001, 12:56 AM
#2083
Originally posted by ME-student
another HK pro3 owner... thats great ernestf
another HK pro3 owner... thats great ernestf
11-13-2001, 01:03 AM
#2084
Tech Addict
dtm: i know.. Pro3 is a good car, but needs tons of options.. i guess thats why nobody buy them. lot of HK guys own TC3? ididnt know that war..!