The Hawaiian

iTrader: (94)

Aloha all...are all the diff's in the T2 line of cars (06,07,08 and 09) interchangeable...as long as the right pulley is used ???? any help would be great...I own a T2 06 and need diff parts and just need to know

thanks

Dave Bowser

iTrader: (51)

the 008, 009, and the T3 diffs are all the same the 007 and every car before that has the old style diff............all the parts are the same except for the out drives

MDawson

iTrader: (27)

yo yo

Lycan

iTrader: (1)

Hi all,

Setting up my T2-009EU for lipos over Xmas and found a Rubber Spec Graphite Pads Set (Part# 301186) which will allows me to extend the top deck.

Problem I've noticed is that the part only appears to be suitable to T2-009's that arent using the Forward Motor Upgrade
I've hunted around (googled) and can't find anything similar for 009s with the forward motor update... or am I missing something?

Any help greatly appreciated.

Cheers
Andrew

TRXRACER99

iTrader: (10)

i would suggest not using the lipo pads as they stiffen your car up and will not have as much corner speed

Lycan

iTrader: (1)

Good call but unfortunately I cant get the lipo under the topdeck without extra bit of height the graphite pads add.

M-Technic

iTrader: (15)

It's really not necessary to put it under the top deck.

rosko

just use a lipo weight tray place the lipo on the tray at a slight angle up against the top deck and tape down. lipo will only hang off the chassis near the rear about an 1/8th of an inch or so.

brians11

iTrader: (40)

Just wondering if 3/32 diff balls are close enough in size to the xray balls (2.4mm). Has anyone used these, or just the 2.4 xray balls?

rcterp

iTrader: (35)

They're the same (or close enough). I use the Niftech 3/32 diff balls.

Chris-s

You will need to hang the battery out to achieve side to side balance. I use the Xray Lipo balancing blocks, keeps the battery in very well, plus you can add the carbon battery strap which makes taking the battery in and out far easier.

MikeR

iTrader: (15)

Hi All,

Check it out. New parts for the T2'009.

http://www.exotekracing.com/EXOTEK_N...12/20_XR2.html

bigb11

iTrader: (59)

Mike, nice chassis kit. Can not wait to get one for my T2R Pro. Once again great job.

jmackani

iTrader: (14)

If you add the lipo balancing weights from xray, they move the battery out some and they do not need to fit under the top deck.

cyclone x

iTrader: (3)

that looks awsome and great price as well