THE DARKSIDE

iTrader: (2)

Nice to hear that you did well Steve, congrats. Any other Darkside cars in the "A"?

Customworksking, sorry I didn't get to see you post in time. shoot me an e-mail at [email protected], lets see if I can get you some more steering. Sounds like something was either broken or set-up wrong. Lack of steering is not a known problem with that chassis.

-E

Customworksking

iTrader: (74)

no prob it was tires .....I only had purp and gray the faster guys ran dbl pink and pink it was my 1st high bite 1/12 race ever still made the A I did win stock rubber i also ran back to back not much setup time had a charger go bad but thats racing car ran good just had a small exit push like all the other cars did that had purp fronts..I learned a lot in the long run

THE DARKSIDE

iTrader: (2)

Looks like 2 Mx2's in the A at the Express race. Finishing 3rd and 9th. Nice job guys


-E

M2_Driver

Brandon and Steve-Nice job! How did the cars feel in stock? What did you think of the changes to the rear end?

How about your set ups?

Thanks again guys for believing in the car. Seems like every race this car goes to opens a few eyes....

SRW141

iTrader: (4)

My car worked awesome all weekend. The rear end changes is what the car needed. The track had tons of traction. The car cornered great and keep up awesome corner speed.
I'm not sure if Brandon ran the new rear end.

THeGame

The car was great all weekend. I Finshed 3rd. I will post my setup when I get home.

-b

THE DARKSIDE

iTrader: (2)

Yea, he had the new parts also.


-E

THE DARKSIDE

iTrader: (2)

Production parts for the Mx2 have arrived at the shop and have started shipping, get your before they're gone.

-E

Mx2...Get one or chase one!

Mike Haynes

iTrader: (2)

Is that a new company slingo?

THE DARKSIDE

iTrader: (2)

Possibly, the runner up to that one was Mx2, Get one or keep chasing Mike Hayes's rear end. Just didn't have the same flow though.

THE DARKSIDE

iTrader: (2)

Express North-South Shoot-Out - Horsham R/C

Stock 1/12 A-Main

1 2 Mark Strasnick 38 00:08:09.649
2 1 Mark Smyka 38 00:08:10.101
3 7 Brandon Hess 36 00:08:00.788 - DARKSIDE Mx2
4 3 Jason Schreffler 36 00:08:05.855
5 5 Sal Amato 36 00:08:08.724
6 4 Andrew Smith 36 00:08:12.568
7 8 Ralph Morella 35 00:08:06.754
8 10 Vito Catalfamo 35 00:08:17.924
9 9 Steve Walter 34 00:08:02.362 - DARKSIDE Mx2
10 6 Greg Fangonil 34 00:08:04.119

Darkside Mx2, Coming to an A-main near you........

Mike Haynes

iTrader: (2)

Nice Steve and Brandon putting the Mx2 in da show

InspGadgt

I figured I'd ask here instead of the 1/12th forum where I've been following this...I know you said there's no immediate plans for a design change but was wondering now that there is a new front end available from CRC which sounds like it's dimensions are a bit more narrow then the AE...have you thought about a version made for the CRC front end?

THE DARKSIDE

iTrader: (2)

No plans as of this point. I think that if that front becomes more popular, I would looking into adapting the chassis to it. It is really too early as of now to make that call. It might be the next big thing or it might just fade into history. If we were to go that route, I'd look at having revisions on the street for the start of next year's winter indoor season. I know of a couple of minor tweaks that will come along at that point, but they are very minor. I haven't had a chance to really look at the front end as of yet. It looks pretty trick, but I'd like to get one in my hands before I make any decisions on design changes specifically for that part.

-E

PayPal rec'd, Welcome to the Darkside!

Mike Haynes

iTrader: (2)

Honestly i don't think there is a reason to change front ends now. My car works pretty darn good with the current (newer AE) one i have on it, and i think there is a bunch more parts which just makes for a lot of stuff that could go wrong. Sometimes simpler is better, some even take that even further and still use the old skool front end.