THE DARKSIDE

iTrader: (2)

At long last, I've started an overhaul of the webiste this week. I'm adding parts, pictures, set-ups, instructions, etc to the site. You will see more and more getting added to the site over the next couple of weeks. By the time I'm done, If we produce it, it will be on the site and available for purchase. Feel free to make suggestions of stuff that you'd like to see there. This has been WAY overdue, but it is finally in the works. Check out the prograss at www.darksidems.com

-E

THE DARKSIDE

iTrader: (2)

Darkside Motorsports and Pemberton Raceworks are proud to announce the release of our new solid titanium ball stud king pins for 1/10 & 1/12 cars. Distance from under the ball stud to the e-clip is 1.045" for the 1/10 pins and 0.840" for the 1/12 pins. No more polishing through the plated finish on your ball stud king pins. Each 1/10 pin weights about 1 gram, the 1/12 pins are even lighter. King pins are sold in pairs

The king pins have been designed to use short RPM rod ends for the perfect no slop fit.

Dealer and OEM inquires welcome

They can be found here on the Darkside Motorsports Site:

http://www.darksidems.com/viewproducts.php?partnum=500

http://www.darksidems.com/viewproducts.php?partnum=501

They will be available on the Pemberton Raceworks here:

http://www.pembertonraceworks.com/

King pins are available now

-E

Jaymancd

iTrader: (4)

Are parts still available for these cars?

THE DARKSIDE

iTrader: (2)

Yes, we stock parts for most every chassis we've every sold. If we're out of a particular part, we'd be happy to run more. Feel free to contact me at [email protected]

THE DARKSIDE

iTrader: (2)

Grenade10

iTrader: (40)

Ran the proto type WGT-R car this past weekend and learned a lot on what is needed with the car. Since the Blur 10 was a good WGT foam car thought it had potential with the rubber tires.

Was able to qualify 6th in the A-main and up to 4th before a hit removed an e-clip that I must not have had set tight, but I had just updated all the upper suspension plastic. So stuff happens.

Really could not have caught 1st - 3rd, but looking at fast laps I got a car with in 0.40 with just 2 1/2 weeks time and having not run carpet for 2+ years. So as some say, if I can be fast with the car...... The Car Must Be Really Good ....

More to follow.

If you have a Darkside Blur and want to make the change PM me and I can get you on the right path.

Mark

Punkshere2stay

iTrader: (2)

I'm digging my blur, I pushed and pushed for people to run just WGT... but I lost out and I will have to be running rubber tire if I want to drive it.. so I did some things and converted it to run the rubber tires.. I need to call Eric and get some spare parts. As I am about out of the few spares the car came with..

Grenade10

iTrader: (40)

If you need any info or compare how I set mine up, it worked very well.

Mark