Mugen MTC1
|
|||
#1142
Attachment 1452325
Hopefully you can read my chicken scratch.
On this one I played with upper links but it took some steering out
Prior to this upper links in stock positions and lowers as they are shown are good.
I’ll end up somewhere in the middle after more testing.
Hopefully you can read my chicken scratch.
On this one I played with upper links but it took some steering out
Prior to this upper links in stock positions and lowers as they are shown are good.
I’ll end up somewhere in the middle after more testing.
#1143
Tech Elite
iTrader: (65)
Snuvet the diagram is misleading and IMO labeled wrong. They are actually not pointing in or out. They are all wider and higher pin settings I just filled the dots in to read the proper label of +0.5 etcetera.
The labels should all have positive or negative on the same side and they don’t so it’s a jacked up drawing on the setup sheet.
I’ll go see if I can modify the setup sheet in the am and post an electronic version.
The labels should all have positive or negative on the same side and they don’t so it’s a jacked up drawing on the setup sheet.
I’ll go see if I can modify the setup sheet in the am and post an electronic version.
#1144
Snuvet the diagram is misleading and IMO labeled wrong. They are actually not pointing in or out. They are all wider and higher pin settings I just filled the dots in to read the proper label of +0.5 etcetera.
The labels should all have positive or negative on the same side and they don’t so it’s a jacked up drawing on the setup sheet.
I’ll go see if I can modify the setup sheet in the am and post an electronic version.
The labels should all have positive or negative on the same side and they don’t so it’s a jacked up drawing on the setup sheet.
I’ll go see if I can modify the setup sheet in the am and post an electronic version.
#1145
Tech Elite
iTrader: (8)
So after another awesome night of racing with the MTC1 I find myself with a serious problem....I need more corner speed!!! When I look at video of my car vs other fast cars it looks as though my car does not transition from side to side fast enough. I'm thinking thicker sway bars might help but wanted to see if anyone had any thoughts??? Currently I'm running on black CRC carpet, super high bite. I'm running 600cst oil with 4 hole pistons with progressive 2.5 - 2.8 springs up front with 2.6 springs in the rear. What do you guys think...?
#1147
So after another awesome night of racing with the MTC1 I find myself with a serious problem....I need more corner speed!!! When I look at video of my car vs other fast cars it looks as though my car does not transition from side to side fast enough. I'm thinking thicker sway bars might help but wanted to see if anyone had any thoughts??? Currently I'm running on black CRC carpet, super high bite. I'm running 600cst oil with 4 hole pistons with progressive 2.5 - 2.8 springs up front with 2.6 springs in the rear. What do you guys think...?