Wildcat1971

iTrader: (84)

try amain

HBRob

iTrader: (61)

mine was like 2200, they are heavy beasts. Even with milled chassis, pucks, etc I only got down to about 2000, which actually felt decent.

mhughesjr

iTrader: (7)

You can find the rears pretty easy, but most places are out of stock on the fronts. I got mine from absolute hobbyz. Not sure if they have any left.

Wildcat1971

iTrader: (84)

which fronts do you want?

lbckevin

iTrader: (107)

My truck is at 1865 grams so far.

lidebt2

iTrader: (21)

Does anyone have instructions to build a 3-Gear Transmission?

Thanks

iScream

iTrader: (12)

What do you need to know? Should build the same as the 4 gear except there's one less gear and the top shaft sticks out the opposite side.

Spikesef

KYOXGS024 fronts and KYOXGS035 rears
Thanks

Fast Little Car

Hit up NorCal Hobbies for both (408) 293-5555
I purchased my SLRC B5M chassis from NorCal. SLRC T5M Chassis is on back order, but they will be able to get you one as soon as they are back

chris c

iTrader: (60)

I have looked and can't seem to find the weight of the x gear gold front and rear springs....I have some avids I want to try out but need a starting point...thanks

robbie_gtc

iTrader: (7)

Plan B rc also makes t5m chassis

Socket

iTrader: (61)

Not in 6061 alloy they don't.

Jpdanger

Are you asking for physical weight off the spring or the compression rate? There's a spring rate comparison chart out there that lists every spring. The chart is linked on the first page of the Rb6 forum board.

chris c

iTrader: (60)

Thanks got it!

iScream

iTrader: (12)

That chart doesn't seem to show the Kyosho truck springs, just the ones for buggies. I've done some searching for a similar chart with the truck springs but haven't found much.

-Chris